• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.8
• /
• pp.596-603
• /
• 2009

The performance of proton exchange membrane fuel cell (PEMFC) is seriously changed by the humidification condition which is intrinsic characteristics of the PEMFC. Typically, the humidification of fuel cell is carried out with internal or external humidifier. A membrane humidifier is applied to the external humidification of residential power generation fuel cell due to its convenience and high performance. In this study, a simple static model is constructed to understand the physical phenomena of the membrane humidifier in terms of geometric parameters and operating parameters. The model utilizes the concept of shell and tube heat exchanger but the model is also able to estimate the mass transport through the membrane. Model is constructed with FORTRAN under Matlab/$Simulink^{(R)}$ $\Box$environment to keep consistency with other components model which we already developed. Results shows that the humidity of wet gas and membrane thickness are critical parameters to improve the performance of the humidifier.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.738-740
• /
• 2003

A method for identifying the released region and time of Asian dust using the long-range inverse transport model that traces the wind field in the backward direction from positions where Asian dust was observed is described. Initial conditions for the inverse transport simulation were obtained from the time variation of the density distribution of the suspended particulate matter (SPM) in the air measured at various places in Japan. Based on a concentration of trajectories of the air mass computed by the inverse transport model, the source region of Asian dust clouds observed at meteorological stations in Japan on March 17 to 18, 2002 was estimated. As a result, it was found that dust particles were released at about 6h on March 15 in the neighborhood of Inner Mongolian Autonomous Region.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.15-18
• /
• 1999

A simple mathematical model for facilitated mass transport through a fixed site carrier membrane was derived by assuming an instantaneous, microscopic concentration (activity) fluctuation. The current model demonstrates that the facilitation factor depends on the extent of concentration fluctuation, the time scale ratios of diffusion to chemical reaction and the ratio of the carrier concentration to the solute solubility in matrix. The model was examined against the experimental data on oxygen transport in membranes containing metallo-porphyrin carriers, and the agreement was exceptional (within 10% error). The basic concept of this approach was applied to separate olefin from olefin/paraffin mixtures. A proprietaty carrier, developed here, resulted that the selectivity of propylene over propane was more than 120 and the propylene permeance exceed 40 gpu.

• International Journal of Railway
• /
• v.5 no.4
• /
• pp.148-151
• /
• 2012

Applications of superconducting technology in transportation is more straightforward than others, such as magnetic levitation (maglev) trains. A maglev train is of high speed & low power-consumption, environmental friendly and safe, accompanied by some drawbacks. This article will introduce the application of superconducting technology in the urban mass transport system, and the bottleneck of this application.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.525-533
• /
• 2012

Snowmelt from seasonal snow covers can be significant in many environments of northern and alpine areas. Water flow and chemical transport resulting from snowmelt have been studied for an understanding of contributions to watersheds or catchments. A Mobile-Immobile water Model (MIM) was developed to describe the movement of ionic tracers through a snowpack by Lee et al. (2008a) and Lee et al. (2008b). To validate the model used in the studies, mass balance calculations of the model were conducted and comparisons were made between model results and analytical solutions in this work. Mass balance was calculated based on the fact that change in total mass within a snowpack with time is equal to sum of any change in the flux of water or ionic tracers into and out of the snowpack. Calculations of both water and ionic mass show almost perfect agreement between changes of two water and solute mass fluxes. Comparisons between model results and analytical solutions including wave velocity and effective saturation show almost perfect agreement.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.2
• /
• pp.135-151
• /
• 2014

It is very important to properly understand such "Transport Pathways" elements as "Pipe" and "Cell" pathways in commercial GoldSim Transport Module (GTM) for developing higer quality models and programs for performance assessment of complex radioactive waste repositories. With an illustrative case under an earthquake scenario, by which an increasement in the groundwater flow rate occurs though the geological medium, ways of avoiding possible modeling errors in the nuclide transport modeling in the radioactive waste repository system for its safety assessment by utilizing such pathways are discussed and a proper usage of the pathways is proposed.

• Particle and aerosol research
• /
• v.7 no.2
• /
• pp.49-57
• /
• 2011

High concentration of PM10 was reported on late July, 2005 in Seoul along with high particulate ion concentrations in PM2.5. To identify the reason for the severe air pollution episode, time series analysis of the PM10 concentration in the monitoring sites over Korea, wind sector analysis, trend analysis of the ion concentrations, and air mass trajectory analysis were carried out. It was found that the episode could be classified into two separate periods; first one between July 22 and 27 and second one between July 28 and 31. During the first period, the PM10 concentrations at Seoul were in good correlation with the PM10 concentration three hours before at Chuncheon. Trajectory analysis showed that air mass moved from north and turned to west at Kangwon province to Seoul. The concentrations of PM10 mass and ionic species were lower than the second period. During the second period, air mass moved from northern China to Seoul directly and the PM10 concentrations all over the mid-Korean peninsula showed the same trend. These observations suggest that the air pollution during the second period was affected by direct transport of air pollutants from northern China. Thus, the air quality at Seoul during both periods were influenced by long-range transport from outside rather than by local sources, but with different transport patterns.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.319-324
• /
• 2020

Electroconvective instability is a non-linear transport phenomenon which can be found in ion-selective transport system such as electrodialysis, Galvanic cell and electrolytic cell. The instability is triggered by the fluctuation of space charge layer in adjacent of ion-selective surface, leading to increase of mass transport rate. Thus, in the aspect of mass transport, the instability has an important meaning. Although recent experimental techniques have opened up an avenue to direct visualize the instability, fundamental investigations have been conducted in limited area due to several experimental limitations. In this work, the electroconvective instability under potentiostatic mode was solved by numerical method in order to demonstrate correlation between current-time curve and the instability behavior. By rigorous time-resolved analysis, the transition behaviors can be divided into three stages; formation of space charge layer - growth of electroconvective instability - steady state. Furthermore, scaling laws of transition time were numerically obtained according to applied voltage as well.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.237-244
• /
• 2016

Background: Korea Atomic Energy Research Institute is developing a fission product transport module for predicting the behavior of radioactive materials in the primary cooling system of a nuclear power plant as a separate module, which will be connected to a severe accident analysis code, Core Meltdown Progression Accident Simulation Software (COMPASS). Materials and Methods: This fission product transport (COMPASS-FP) module consists of a fission product release model, an aerosol generation model, and an aerosol transport model. In the fission product release model there are three submodels based on empirical correlations, and they are used to simulate the fission product gases release from the reactor core. In the aerosol generation model, the mass conservation law and Raoult's law are applied to the mixture of vapors and droplets of the fission products in a specified control volume to find the generation of the aerosol droplet. In the aerosol transport model, empirical correlations available from the open literature are used to simulate the aerosol removal processes owing to the gravitational settling, inertia impaction, diffusiophoresis, and thermophoresis. Results and Discussion: The COMPASS-FP module was validated against Aerosol Behavior Code Validation and Evaluation (ABCOVE-5) test performed by Hanford Engineering Development Laboratory for comparing the prediction and test data. The comparison results assuming a non-spherical aerosol shape for the suspended aerosol mass concentration showed a good agreement with an error range of about ${\pm}6%$. Conclusion: It was found that the COMPASS-FP module produced the reasonable results of the fission product gases release, the aerosol generation, and the gravitational settling in the aerosol removal processes for ABCOVE-5. However, more validation for other aerosol removal models needs to be performed.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.132-140
• /
• 2024

In the event of a severe accident in Sodium Cooled Fast Reactors (SFR), the sodium combustion aerosols along with fission product aerosols would migrate to the environment through leak paths of the Reactor Containment Building (RCB) concrete wall under positive pressure. Understanding the characteristics of sodium aerosol transport through concrete leak paths is important as it governs the environmental source term. In this context, experiments are conducted to study the influence of various parameters like pressure, initial mass concentration, leak path diameter, humidity etc., on the transport and deposition of sodium aerosols in straight leak paths of concrete. The leak paths in concrete specimens are prepared by casting and the diameter of the leak path is measured using thermography technique. Aerosol transport experiments are conducted to measure the transported and plugged aerosol mass in the leak paths and corresponding plugging times. The values of differential pressure, aerosol concentration and relative humidity taken for the study are in the ranges 10-15 kPa, 0.65-3.04 g/m³ and 30-90% respectively. These observations are numerically simulated using 1-Dimensional transport equation. The simulated values are compared with the experimental results and reasonable agreement among them is observed. From the safety assessment view of reactor, the approach presented here is conservative as it is with straight leak paths.