• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.451-471
• /
• 2006

Major projects and research topics in the field of rock mechanics are analyzed to obtain the following results: $\cdot$ Rock mechanics deals with the behavior of deformation, failure and displacement of the rock and rock mass on the basis of geological basics. Discontinuities in the rock mass are the most important parameters to control the behavior of rock mass around underground openings. $\cdot$ The objective of site investigation and testing is to determine the strength properties of the rock mass and the in situ stress regime. Specimens for laboratory and in situ tests are to be selected in order that the results of the tests give the representative properties oi the rock mass of the site in question. $\cdot$ The result of a numerical model would be better evaluated not quantitatively but qualitatively. The displacement behavior of the rock mass has to be monitored properly for the NATM (New Austrian Tunneling Method) principles. $\cdot$ The stability of rock slope is to be evaluated preferably by back analysis with strength parameters, such as cohesion and friction angle.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.2
• /
• pp.235-244
• /
• 2016

Grouting is frequently used before the construction of subsea tunnels to mitigate problems that can occur in weak ground zones such as joints, faults or unconsolidated settlements during construction. The grout material injected into rock mass often flows through the discontinuities present in the host rock and hence, joint properties such as its distribution, roughness and thickness greatly affect the properties of grouting-improved rocks. The grouting-improved zones near subsea tunnels are also subjected to high water pressures that can cause long-term weathering in the form of changes in grout microstructure and crack formation and lead to subsequent changes in ground properties. Therefore, an assessment method is needed to accurately measure changes in the grouting-improved zones near subsea tunnels. In this study, the elastic wave propagation characteristics in grouting-improved rocks were tested for various axial stress levels, curing time, joint roughness and thickness conditions under laboratory conditions and the results were compared with wave velocity standards in different Korean rock mass classification systems to provide a basis for inferring improvement in grouted rock-mass.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.3
• /
• pp.553-564
• /
• 2013

The core ingredient of traditional Korean style soy sauce is soy bean without any wheat or rice incorporated. National brands as well as regional micro-brewed companies constitute the soy sauce market in Korea. The present study investigated the physico-chemical and sensory properties of soy sauces produced by small-scale or mass-production. Additionally, the key physico-chemical parameters sufficiently representing the critical sensory characteristics have been identified. Ten types of soy sauce brewed by the Korean traditional method were selected for the study. Among these samples, seven types were brewed in small-scales in the Gyeonggi-do region whereas the other 3 types were mass-production products of major national brands. The total solid, reducing sugar, salinity, sugar content, amino nitrogen, CIELAB, acidity, and pH of soy sauce samples were measured for the physico-chemical analysis. A generic descriptive analysis was conducted to analyze the sensory characteristics of the samples using six trained panelists. The descriptive panel developed 21 sensory attributes. The data were statistically analyzed using ANOVA, PCA and PLSR. Overall, the micro-brewed products showed significantly higher value of salinity and acidity but lower content of reducing sugar than the mass-production products. The micro-brewed soy sauces elicited stronger fermented flavor, sourness, and bitterness whereas the national brand products elicited stronger alcoholic odor, sweetness and umami taste. Sugar content, acidity, and amino nitrogen showed strong relationships with fish sauce flavor, umami taste, and rich flavor. Salinity was closely related to the overall flavor intensity.

• Microbiology and Biotechnology Letters
• /
• v.52 no.2
• /
• pp.152-162
• /
• 2024

The microbial starter used to produce kefir beverages, kefir grain, contains a microbial exopolysaccharide called kefiran. Kefir grain consisting of water-insoluble polysaccharides, proteins, and fats, which can be applied as a multi-functional biopolymer. The mass of kefir grain can increase in the fermentation process of Kefir, but it is considered very slow. The purpose of this research is to study the impact of ammonium sulfate supplementation and yeast extract on reconstituted skim milk to increase the mass kefir grain and physical properties of kefiran. Results showed that the ammonium sulfate-supplemented substrate increased the mass of kefir grain by 547% in 14 days, with the condition that the substrate must be renewed every 2 days. Refreshing the substrate is considered one of the important factors. Supplementation on substrate did not appear to affect the viability of bacterial and yeast cells. Kefir grain produced from supplemented substrate also yields better thermal stability properties and has more functional groups than without supplementation. Two Lacticaseibacillus rhamnosus (RAL27 and RAL43) and one Limosilactobacillus fermentum (RAL29) were found to produce EPS. The three isolates also showed good skim milk fermentation ability after purification from kefir grain. The kefir grain produced in this study has the potential for wider application. This study also showed that kefir grain can be adjusted in quantity and quality through fermentation substrate engineering.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.5
• /
• pp.352-362
• /
• 2012

Mass transfer behavior in wood was estimated through its microscopic structure. The diffusion coefficients which were decided by theoretical equations are influenced by different anatomical properties of wood. From the experiment, the moisture flux was linear to the square root of time. The diffusion coefficients had a regular tendency during the time elapse. During the modeling, it is necessary to understand the limitation of parameters and consider the particular situation to be simulated. In hardwood, because the apertures were not considered, tangential mass transfer simulation was totally different from experiment. As a result, a hardwood model design should consider the apertures which are even on the fiber walls.

• Mass Spectrometry Letters
• /
• v.8 no.4
• /
• pp.79-89
• /
• 2017

Ion mobility mass spectrometry (IM-MS) combines the advantages of ion mobility spectrometry (IMS) and MS for effective gas-phase ion analysis. Separation of ions based on their mobilities prior to MS can be performed without a great loss in other analytical figures of merit, and the extra dimension of analysis offered by IM can be beneficial for isomer and complex sample analyses. In this review, basic principles of IMS and IM-MS are described in addition to an introduction to various IMS techniques and commercial IM-MS instruments. The nature of collision cross-section (${\Omega}_D$), an important parameter determining the transport properties of ions in IMS, is also explained in detail.

• BMB Reports
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2008

Ubiquitin is an essential, highly-conserved small regulatory protein in eukaryotic cells. It covalently modifies a wide variety of targeted proteins in the forms of monomer and polymers, altering the conformation and binding properties of the proteins and thus regulating proteasomal delivery, protein activities and localization. Mass spectrometry has emerged as an indispensable tool for in-depth characterization of protein ubiquitination. Ubiquitinated proteins in cell lysates are usually enriched by affinity chromatography and subsequently analyzed by mass spectrometry for identification and quantification. Ubiquitin-conjugated amino acid residues can be determined by unique mass shift caused by the modification. Moreover, the complex structure of polyubiquitin chains on substrates can be dissected by bottom-up and middle-down mass spectrometric approaches, revealing potential novel functions of polyubiquitin linkages. Here I review the advances and caveats of these strategies, emphasizing caution in the validation of ubiquitinated proteins and in the interpretation of raw data.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.86.1-86.1
• /
• 2014

Two substellar companion candidates with planetary mass, around a T-Tauri star in the ${\rho}$ Ophiuchi star-forming region, are discovered by results of Subaru Telescope's near-infrared imaging. Candidates are separated by 1400au and 500au. If these candidates were real companions, they are the widest-orbit and the lowest mass planetary-mass companions(PMCs) candidates. This discovery may suggest that PMCs form via extreme case of cloud core fragmentation for multiple stars. And also stellar disk are imaged by HiCIAO, hight contrast instrument for exoplanets and disks, with Subaru Telescope. This could be the first case, which imaged both of planetary mass companions and disk around same star. Even two companions candidates are not bounded around the star, they still could be one of the lowest mass objects. In this presentation, I will discuss about observations and confirmations of these objects, and the latest results about their properties.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.29.4-29.4
• /
• 2016

The relations between star formation and properties of molecular clouds are studied based on a sample of star forming regions in the Galactic Plane. Sources were selected by having radio recombination lines to provide identification of associated molecular clouds and dense clumps. Radio continuum and mid-infrared emission were used to determine star formation rates, while 13CO and submillimeter dust continuum emission were used to obtain masses of molecular and dense gas, respectively. We test whether total molecular gas or dense gas provides the best predictor of star formation rate. We also test two specific theoretical models, one relying on the molecular mass divided by the free-fall time, the other using the free-fall time divided by the crossing time. Neither is supported by the data. The data are also compared to those from nearby star forming regions and extragalactic data. The star formation "efficiency," defined as star formation rate divided by mass, spreads over a large range when the mass refers to molecular gas; the standard deviation of the log of the efficiency decreases by a factor of three when the mass of relatively dense molecular gas is used rather than the mass of all the molecular gas.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.80-80
• /
• 2014

Dynamics of a globular cluster (GC) is dominated by behaviors of high-mass components such as neutron stars or black holes (BHs). Massive components in a cluster are segregated into the cluster core and some of them are ejected by dynamical interactions. In this study, we perform N-body simulations of GCs adapting two BH mass components, $10M_{\odot}$ and $20M_{\odot}$. Previous studies which mostly assume single-mass BHs suggested a rapid collapsing and escaping of BHs. A cluster with a two-component BH mass spectrum, however, retains a large fraction of $10M_{\odot}$ BHs longer. In addition to their roles in cluster dynamics, massive components in binaries are one of important sources of gravitational waves (GWs). We investigate properties of BH binaries escaped from the cluster and discuss their implications for GW detection.