• Preventive Nutrition and Food Science
• /
• v.8 no.3
• /
• pp.230-234
• /
• 2003

Mass transfer characteristics during osmotic dehydration of carrots were studied as functions of immersion temperature and time, and sugar and salt concentrations. The effect of osmotic dehydration on the degree of browning of air-dried carrots was also evaluated. Increasing the immersion temperature and time, sugar concentration, and salt addition increased water loss, sugar gain, molality and rate of dehydration. The water loss and increases in solids, and molality were rapid in the beginning of the process and then increased slowly during remainder of the process. Increasing 1 or 2% salt concentration in the 40$^{\circ}$Brix sugar solution at 6$0^{\circ}C$ increased water loss and solid gain. Salt addition was not able to significantly affected on water loss and solid gain compare to temperature (40～8$0^{\circ}C$) and sugar concentration (20～60$^{\circ}$Brix) changes due to the low salt concentration. A minimum degree of browning of the air-dried carrots (O.D. = 0.048) could be achieved using binary solutions (40$^{\circ}$Brix sugar solution with 2% salt addition) with 24 min of immersion time compared to control (O.D. = 1.308) or blanching with 24 min of immersion time (O.D. = 0.174).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.12
• /
• pp.978-982
• /
• 2010

For mass information transfer, the optical communication using optic fiber has been widely used. Especially, in the field of medical image, the large data is digitalized based on the standard image and it is used for telemedicine with this method. Therefore, to transfer the large amount of data fast and effectively POF (Plastic Optical Fiber) can be used and the development of optic connector for connection between POFs is very important. In this study, for stable optical coupling of POF optic fiber Ferrule and Sleeve were designed and produced by considering the bond stability and the insertion loss according to the physical contact and roughness profile was evaluated. As a result of examining the insertion loss by physical contact method of two optic fibers, it showed the loss was about 1.895dB. According to the results from studying the condition of grinding section for POF mass production, the mass production condition was established as POF profile roughness of 6nm and the loss of 0.2dB or lower by controlling the film size and time step by step.

• Journal of Ceramic Processing Research
• /
• v.19 no.5
• /
• pp.388-393
• /
• 2018

Sublimation of $Bi_2O_3$-based materials is an important degradation issue for the long-term applications of many electronic devices. A series of $SnO_2$-doped $Bi_2O_3$ materials (SBO), was synthesized, densified, and then tested in air or strong reducing atmosphere. The $SnO_2$-doping effects and sublimation kinetics of the SBO materials were studied by X-ray diffraction (XRD), scanning electron microscope (SEM) and precise mass loss measurement. The results show that formation of $Bi_2Sn_2O_7$ phase greatly retards the mass loss of SBO. The SBO samples show a surface sublimation in an energy of $52.6kJ{\cdot}mol^{-1}$. However, the sublimation is also controlled by surface microstructure as the amount of vaporizing species (the Bi or gaseous Bi-oxides) is more than 0.1 mass%. The evaporation is retarded on the rough surface and the mechanism of surface evaporation is changed to diffusional control.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.13 no.3
• /
• pp.485-492
• /
• 2006

Purpose: The purpose of this study was to identify body satisfaction and weight loss experience according to individual's discrepancy between obesity by BMI (body mass index) and self-assessment. Method: The data were obtained by measuring height, weight and using a questionnaire to obtain data on self-assessment of obesity, body satisfaction and weight loss experience. The participants were 286 women college students in J city, Chungbuk. Results: The mean BMI of the women college student was $21.4{\pm}2.93kg/m^2$ which is within the normal range. The concordance rates between obesity by BMI and self-assessment were 54.1%, 39.9%, 61.5%, 78.6% (Kappa=.29) in underweight, normal, overweight, obese students respectively. Forty seven percent of students who were not obese (BMI $<23kg/m^2$) assessed themselves as obese. The mean body satisfaction of college students was very low and 64.3% of the students had a weight loss experience. The students who perceived themselves to be 'obese' even when their BMI was under $23kg/m^2$ reported lower body satisfaction and higher weight loss experience than other students. Conclusion: There were significant discrepancies between obesity by BMI and self-assessment in women college students. The self-assessment of obesity had a greater effect on body satisfaction and weight loss experience than actual BMI in women college students.

• Korean Journal of Environmental Biology
• /
• v.39 no.2
• /
• pp.218-224
• /
• 2021

This study was conducted to determine the mass-loss rates and the changes in carbon/nitrogen (C/N) ratio of dead woods, which were of following species: Dryobalanops aromatic, D. rappa, and Cratoxylum arborescens. These were dominant tree species in mixed Dipterocarp forests (MDF) and peat swamp forests (PSF) in Brunei Darussalam. In May, 2019, 48 dead wood samples (15 cm×4.8 cm×5 cm) were placed in MDF and PSF sites, and all the samples were collected after 16 months. The effects of species on mass loss were statistically significant (p<0.05); however, no difference was observed in the mass loss obtained from the two forest types (p>0.05). The initial density (g·cm^-3) of the dead woods D. aromatic, D. rappa, and C. arborescens, was 0.64±0.02, 0.60±0.00, and 0.44±0.01, respectively. Also the annual mass loss rate (%) was estimated to be 6.37, 8.17, and 18.53 for D. aromatic, D. rappa, and C. arborescens, respectively. The proportion of dead woods in decay class III was only 25% of C. arborescens samples, which were attacked by wood-feeding invertebrates, such as termites. The C/N ratio decreased significantly in D. aromatic and D. rappa, but the decreasing trend of C/N ratio was not statistically significant in C. arborescens. The results indicate that physical traits of dead woods, such as density, could be one of the main factors causing the decomposition of dead woods initially, as invertebrates such as termites are one of the key decomposers of dead wood in tropical rainforests. In the samples of C. arborescens, which was attacked by invertebrates, nitrogen immobilization occurred to lesser extent as compared to that observed in D. aromatic and D. rappa.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.88.1-88.1
• /
• 2014

Helium mass in the envelope is one of the most important properties in progenitors of type Ib/c supernovae (SNe Ib/c), since SN Ib/c progenitors are distinguished by the presence of He I lines. However, previous progenitor models do not reproduce the required He mass limit($M_{He}$ < $0.14M_{\odot}$) suggested by a spectroscopic analysis of SN Ib/c. In this work, we investigated the effect of overshooting on the evolution of pure helium stars, focusing on the final He mass in the envelope, $M_{He,f}$. We used the MESA code to calculate single helium star models with the initial masses of $M_{init}=5{\sim}30M_{\odot}$, Z=0.02, 0.04 and overshooting parameters of $f_{ov}=0{\sim}0.4$. The final He mass $M_{He,f}$ decreases as $f_{ov}$ increases, due to larger burning core compared to weak overshooting models. Dependence of the final mass $M_{He,f}$ on overshooting is strongest for models with $M_{init}=7{\sim}10M_{\odot}$, and this effect originates from accelerated mass loss during transition between WNE and WC/O phase. However, $M_{He,f}$ exceeds $0.27M_{\odot}$ for all models, which still doesn't meet the criteria of $M_{He}$ < $0.14M_{\odot}$. This implies that mass loss during the post helium burning phase must be enhanced dramatically compared to what the standard models predict.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.97-100
• /
• 2007

This study deals with the sound insulation performance of the damping sheet, which is widely used in a train. The wall of train is assumed to be a plate made of steel and two damping sheets. In case of damping sheet only, the sound transmission loss follows the mass law. If a steel plate is attached to damping sheet, the transmission loss is found to be higher than single of only steel plate, as we can anticipated, about $3{\sim}5$ dB. This is very well known consequence that is because the density of area increases. However, the increase of the transmission loss is not higher than what we can expect by the mass law. That's because the steel is perfectly blocked from the transmission of the air ; There is no defect in that material.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.634-642
• /
• 1998

This paper deals with the analytical model of an elastic porous material in sound transmission loss of a double panel with fiber glasses. From the parametric analysis, it is concluded that the boundary condition, which is concerned to the contact between the skin panel and core materials, does not have much influence on sound transmission loss of a double panel with fiber glasses, and material properties of the porous material become, however, important factors to mass-spring-mass resonance. The comparisons of the prediction with the measurement of sound transmission loss of walls show good agreement between the two values.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.63-74
• /
• 2001

In this study, a cycle simulation program of a Unit-Injection(UI) system was developed to estimate the injection performance of newly designed injection system. A fundamental theory of the simulation program is based on the conservation law of mass. Loss of fuel mass in the system due to leakage, compressibility effect of the liquid fuel and friction loss in the control volume was considered in the algorithm f the program. For the evaluation of the simulation program developed, the experimental result which was offered by the Technical Research Center of Doowon Precision Industry Co. was incorporated. Two main parameters; the maximum pressure in the plunger chamber and total fuel mass(kg) injected into the engine cylinder per cycle, were measured and compared with the simulation results. It was found that the maximum error rate of the simulation result to the experimental output was less than 3% in the rated rotational speed (rpm) range of the plunger cam.

• Korean Journal of Environment and Ecology
• /
• v.28 no.2
• /
• pp.105-112
• /
• 2014

During incubation, pelagic seabirds undergo large variations in their body mass as a result of concomitant fasting. In Procellariifomes undergoing important changes in body mass through the incubation, body mass regulation could be an important factor in behavioural decisions for changing activities during the incubation. The aim of this study was to investigate the effect of individuals' quality and incubation behaviour on their body mass regulation in Streaked Shearwaters Calonectris leucomelas breeding at Sasudo Island, in Jeju, South Korea during incubation period, June to August in 2013. In our results, we found that there was no relationship between the daily body mass loss and body size or condition of Streaked Shearwaters. However, the daily body mass loss increased significantly as the incubation bout increased. Moreover, the daily incubation bout was positively related to their body size. Consequently, although breeders' qualities were not related to their daily body mass loss during the incubation, the incubation behaviour affecting their daily body mass loss was regulated by their body size. Therefore, the body size of Streaked Shearwater breeders is one of important factors in their decisions for the incubation behaviour.