• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.69-76
• /
• 2004

This paper presents a prediction model for the aerosol generation of cutting fluid in turning process. Experimental studies have been carried out in order to identify the characteristics of aerosol generation in non-cutting and cutting cases. The indices of aerosol generation was mass concentration comparable to number generation, which is generally used fur environment criterion. Based on the experimental data, empirical model for predicting aerosol mass concentration of cutting fluid could be obtained by a statistical analysis. This relation shows good agreement with experimental data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.547-548
• /
• 2009

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.545-553
• /
• 2021

International Maritime Organization (IMO) have recently discussed the technical problems related to the second-generation intact stability criteria of ships. The second-generation intact stability criteria refer to five modes of vulnerability when the ship sailing in the ocean. In this study, we described a method to verify the criteria of the surf-riding/broaching. In case that Lv1 (Level 1) vulnerability criteria is not satisfied based on the relatively simple calculation using the Froude number (Fn), we presented the calculation procedure for the Lv2 (Level 2) criteria considering the hydrodynamics in waves. The results were reviewed based on the data for given previous ships. In absence of ship-specific data, a similar Lv2 result was confirmed by comparing the result obtained by calculating the added mass with the case where the added mass was 10% of the ship mass. This result will contribute to basic ship design process according to the IMO draft regulation.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.422-430
• /
• 2001

In the present study, an evaporative generation process of ammonia-water solution film on the vertical plate was analysed. For the utilization of waste heat, hot water of low temperature was used as the heat source. The continuity, momentum, energy and diffusion equations for the solution film and vapor mixture were formulated in integral forms and solved numerically. Counter-current solution-vapor flow resulted in the refrigerant vapor of the higher ammonia concentration than that of co-current flow. Eve the rectification of refrigerant vapor was observed near the inlet of solution film in counter-current flow. For the optimum operation of generator using hot water, numerical experiments, based on the heat exchange and generation efficiencies. revealed the inter-relationships among the Reynolds number of the solution film and hot water, and the length of generator. Enhancement of heat and mass transport in the solution film was found to be very effective for the improvement of generation performance, especially at high solution flow rate.

• 대한기계학회논문집B
• /
• 제26권8호
• /
• pp.1077-1087
• /
• 2002

The heat (mass) transfer characteristics on the blade surface of a high-turning first-stage turbine rotor for power generation has been investigated by employing the naphthalene sublimation technique. A four-axis profile measurement system is developed successfully for the measurements of local sublimation depth on the curved surface In the leading edge region, there is a good agreement between the present heat (mass) transfer data and the previous result on a turbine blade with a moderate turning angle, but some discrepancies are found in the mid-chord heat (mass) transfer between the two results. The local heat (mass) transfer on the present suction surface is greatly enhanced due to an earlier boundary transition, compared with that on a turbine blade with a moderate turning angle, meanwhile there is only a slight change in the pressure-side heat (mass) transfer between the two different turbine rotors. In general, the heat (mass) transfer augmentation by the endwall vortices is found much higher on the suction surface than on the pressure surface.

• 한국식생활문화학회지
• /
• 제17권4호
• /
• pp.435-445
• /
• 2002

The purpose of this study was to identify the pattern and perception of food consumption, mass restaurant use, drinking style, and food purchasing factors by cohort groups i. e., World Cup(W) generation, baby boom, and silent generation. Data were collected from 412 respondents including three generations by questionnaire method in April through May 2002. Analysis of variance and chi-square results indicate that there were significant differences among three generation groups for the pattern and perception of food consumption, the use of mass restaurant, preferred drinking style, and influencing factors for food purchasing. W generation are more likely to be influenced by sensibility factor than baby boom and silent generation. Considering food preference pattern, baby boom as well as silent generation prefer green vegetables than meats, and they must have Kimche when having meals. Similarities and differences in perceptional pattern types are discussed, and future implications for food and nutrition specialists and food marketers are provided.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.9-12
• /
• 2005

This paper investigated the temperature history of mass concrete mock up structure considering different heat generation by varying with mixture proportion. Setting time difference between high early strength mixture (E-P) and retarding mixture (R-F30) was 14.5hours. Incorporation of $30\%$ of fly ash contributed to $10^{\circ}C$ of hydration heat reduction. In generally used C and D combination, bottom concrete shows earlier hydration, while E-J combination showed reverse tendency and thus, this method can reduce the crack occurrence. Therefore, heat generation difference method has beneficial effect on reducing crack induced by hydration heat resulting from heat generation difference between surface and center section.

• 천문학회보
• /
• 제44권1호
• /
• pp.68.3-68.3
• /
• 2019

Even though the initial mass function (IMF) of the first generation of stars played important roles in reionization of the universe, subsequent star formation, and chemical enrichment of the universe, it is still very uncertain. In this study, among the several indirect ways of estimating the IMF of the population III (Pop III) stars, we make use of extremely metal-poor (EMP; [Fe/H] < -3.0) stars in the Milky Way, in order to infer the characteristic mass range of Pop III stars. As the progenitors of many of the EMP stars are known to be Pop III stars, we attempt to construct the characteristic mass range of the progenitors (e.g., Pop III stars) of the EMP stares by comparing their observed abundance pattern of various chemical elements with chemical yields from supernova models.

• 한국환경과학회지
• /
• 제17권10호
• /
• pp.1069-1073
• /
• 2008

Indoor air quality can be affected by indoor sources, ventilation, decay and outdoor levels. Although technologies exist to measure these factors, direct measurements are often difficult. The purpose of this study was to develop an alternative method to characterize indoor environmental factors by multiple indoor and outdoor measurements. Using a mass balance model and regression analysis, penetration factor (ventilation rate divided by the sum of ventilation rate and deposition constant) and source strength factor (source strength divided by the sum of ventilation rate and deposition constant) were calculated using multiple indoor and outdoor measurements. Subsequently, the ventilation rate and $NO_2$ generation rate were estimated. Mean of ventilation rate was 1.41 ACH in houses, assuming a residential N02 deposition constant of 0.94 $hr^{-1}$. Mean generation rate of $NO_2$ was 16.5 ppbv/hr. According to house characterization, inside smoking and family number were higher $NO_2$ generation rates, and apartment was higher than single-family house. In conclusion, indoor environmental factors were effectively characterized by this method using multiple indoor and outdoor measurements.

• Bulletin of the Korean Chemical Society
• /
• 제25권2호
• /
• pp.233-236
• /
• 2004

Total impurity analysis of a primary standard solution is one of the essential procedures to determine an accurate concentration of the standard solution by the gravimetry. Bi impurity is determined in Pb standard solutions by inductively coupled plasma mass spectrometry (ICP-MS). The direct nebulization of the Pb standard solution produces a significant amount of the Pb matrix-induced molecular ions which give rise to a serious spectral interference to the Bi determination. In order to avoid the spectral interference from the interferent $^{208}PbH^+$, the hydride generation method is employed for the matrix separation. The Bi hydride vapor is generated by reaction of the sample solution with 1% sodium borohydride solution. The vapor is then directed by argon carrier gas into the ICP after separation from the mixture solution in a liquid-gas separator made of a polytetrafluoroethylene membrane tube. The presence of 1000 ${\mu}$g/mL Pb matrix caused reduction of the bismuthine generation efficiency by about 40%. The standard addition method is used to overcome the chemical interference from the Pb matrix. Optimum conditions are investigated for the hydride-generation ICPMS. The detection limit of this method is 0.5 pg/mL for the sample solutions containing 1000 ${\mu}$g/mL Pb matrix.