• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.727-733
• /
• 2009

Effects of $Ca(OH)_2$ concentration(0.16~0.64 wt%), total volumetric flow rate(3~6 L/min) and $CO_2$ volume fraction(0.3~0.6) on morphology of the precipitated $CaCO_3$ and the mean particle size of the precipitated $CaCO_3$ were investigated in the slurry bubble column reactor. Experiments were carried out in acrylic reactor($0.11m-ID{\times}1.0m-high$) with a internal tube($0.04m-ID{\times}1.0m-high$). The calibration curve on the mass ratio of $CaCO_3$ to $Ca(OH)_2$ was obtained by FT-IR for the conversion of $Ca(OH)_2$ with the reaction time. The reaction rate of $Ca(OH)_2$ increased with increasing the volumetric flow rate of $CO_2$. From SEM images, the crystal size of $CaCO_3$ increased with increasing the reaction rate in the saturated concentration of $Ca(OH)_2$ (0.16 wt%). In addition, the crystal size of precipitated $CaCO_3$ decreased with increasing the concentration of $Ca(OH)_2$, but the mean particle size of precipitated $CaCO_3$ increased with increasing the concentration of $Ca(OH)_2$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.370-377
• /
• 2001

Flounder brain cytosol contains protein inhibitors that markedly inhibit the activity of partially purified brain membrane phospholipase D (PLD) which is dependent on phosphatidylinositol 4,5-bisphosphate ($PIP_2$) but insensitive to ADP-ribosylation factor (ARF), The PLD inhibitors have been enriched through several chromatographic steps and characterized with respect to size and mechanism of inhibition. Sequential chromatography of the brain cytosol yielded six inhibitor fractions, Two (IIA and IIB) of six inhibitor fractions showed the $PIP_2$-phosphatase activities. IIA was identified as synaptojanin, a nerve terminal protein that has known to be a member of the inositolpolyphosphate 5-phosphatase family, by immunoblot analysis. IIB showed an apparent molecular mass of 158 kDa by Superose 12 gel filtration chromatography and was immunologically distinct from synaptojanin. IIB hydrolyzed $PIP_2$, yielding only phosphatidylinositol phosphate (PIP) as product, suggesting that IIB hydrolyzes only one phosphate from either the 4- or 5-position of PI (4,5)$P_2$. These studies demonstrate that the existence of multiple $PIP_2$-phosphatases have been implicated in the negative regulation of $PIP_2$-dependent PLD activity within flounder brain.

• Korean Journal of Agricultural Science
• /
• v.29 no.2
• /
• pp.78-90
• /
• 2002

This study was carried out to investigate whether peptide produced from wheat protein by enzyme hydrolysis can be used as a natural antimicrobial agent. Antimicrobial peptide was obtained from wheat protein by protease of 7 species. The produced antimicrobial peptide was purified through ultrafiltration, membrane filtration and HPLC, and molecular weight and amino acid sequence of the purified antimicrobial peptide were determined. Among hydrolysate produced from wheat protein by protease of 7 species, antimicrobial activity was observed for the peptide obtained from Asp. saito protease. The Asp. saito protease did production antimicrobial hydrolysate showing the highest antimicrobial activity at reaction condition of $37^{\circ}C$ and pH 6.0, but not at reaction condition above $50^{\circ}C$. Wheat protein hydrolysate was fractionated by membrane filtration and showed antimicrobial activity between molecular weight 1,000 - 3,000. The antimicrobial activity fraction obtained by membrane filtration was separated through HPLC and showed antimicrobial activity in the peak of retention time 31.1 - 31.8 min. Since after wheat protein protease hydrolysate was heated during 15 min at $121^{\circ}C$, antimicrobial activity was maintained, we could be conviction as heat-stable peptide. Molecular weight of antimicrobial peptide identified by MALDI-mass was 1,633. Amino acid sequence of antimicrobial peptide was cysteine, glycine, prolin, prolin, prolin, valine, valine, alanine, alanine and arginine.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.275-281
• /
• 2020

Purpose: Development of a latent antimicrobial soft liner is strongly needed to overcome a possible inflammation related with its dimensional degrade or surface roughness. Modified tissue conditioner (TC) containing chitosan-doped silver nanoparticles (ChSN) complexes were synthesized and assessed for their characterizations. Materials and methods: ChSN were preliminarily synthesized from silver nitrate (AgNO₃), sodium borohydride (NaBH₄) as a reducing agent and chitosan biopolymer as a capping agent. Ultraviolet-visible and Fourier transform infrared spectroscopy were conducted to confirm the stable reduction of nanoparticles with chitosan. Modified TC blended with ChSN by 0 (control), 1.0, 3.0 and 5.0 % mass fraction were mechanically tested by ultimate tensile strength (UTS), silver ion elution and color stability (n=7). Results: At 24 hour and 7 day storage periods, UTS values were not significant (P>.05) as compared with pristine TC (control) and silver ion was detected with the dose-dependent values of ChSN incorporated. Color stability of TC were influenced by ChSN add, with the higher doses, the significantly greater color changes (P<.05). Conclusion: A stable synthesized ChSN was acquired and modified TC loading ChSN was characterized as silver ion releasing without detrimental physical property. For its clinical application, antimicrobial test, color control and multifactor investigations are still required.

• Advances in pediatric surgery
• /
• v.19 no.2
• /
• pp.81-89
• /
• 2013

The purposes of this study was to describe the clinical correlation of mass size and gestational age, prognostic factors in sacrococcygeal teratoma (SCT) at a tertiary pediatric surgery, University of Ulsan College of Medicine and Asan Medical Center (AMC), Seoul, Korea. Fifty five patients admitted to the AMC with a SCT between May 1989 and April 2013 were included in this retrospective review. Mean follow up was 861 days. Mean maternal age at delivery was $30{\pm}2.7$ year, mean gestational age (GA) was $36.9{\pm}3.6$ wks, and preterm delivery was 21.8%. Birth body weight was $3182{\pm}644$ g and male vs. female ratio was 1:2.05. We can't find significant difference between Caesarean section and maternal age at delivery (p =0.817). But, caesarean section was favored by gestational age (p = 0.002), larger tumor size (p =0.029) or higher tumor weight fraction rate to birth body weight (p =0.024). Type I was 13, II 21, III 17, and IV 3 according to Altman et al. classification. The tumor component was predominantly cystic(> 50%) in 73.1 %. And the majority histological classification of tumors were mature teratoma (70.3%). The motality rate was 5.5%. Three patients expired because of postpartum bleeding, post-op bleeding related complication such as DIC. SCT recurred in four patients. The interval between first and second operation was $206.2{\pm}111.0$ d (range 53~325 d). In two patients, serum AFP levels were elevated at a regular checkup without any symptom, and subsequent imaging studies revealed SCT. The most common cause of death was bleeding and bleeding related complication. So Caesarean section and active peripartum and perioperative management will be needed for huge solid SCT. In the case of Yolk sac tumor or huge immature teratoma, possibility of recurrence have to be always considered, so follow up by serial AFP and MRI is important for SCT management.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.3
• /
• pp.113-117
• /
• 2009

STATEMENT OF PROBLEM. Recently Yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) has been introduced due to superior flexural strength and fracture toughness compared to other dental ceramic systems. Although zirconia has outstanding mechanical properties, the phenomenon of decrease in the life-time of zirconia resulted from degradation in flexural strength after low temperature aging has been reported. PURPOSE. The objective of this study was to investigate degradation of flexural strength of Y-TZP ceramics after various low temperature aging treatments and to evaluate the phase stability and micro-structural change after aging by using X-ray diffraction analysis and a scanning electron microscope (SEM). MATERIAL AND METHODS. Y-TZP blocks of Vita In-Ceram YZ (Vita Zahnfabrik, Bad $S\ddot{a}ckingen$, Germany) were prepared in 40 mm (length) $\times$ 4 mm (width) $\times$ 3 mm (height) samples. Specimens were artificially aged in distilled water by heat-treatment at a temperature of 75, 100, 125, 150, 175, 200, and $225^{\circ}C$ for 10 hours, in order to induce the phase transformation at the surface. To measure the mechanical property, the specimens were subjected to a four-point bending test using a universal testing machine (Instron model 3365; Instron, Canton, Mass, USA). In addition, X-ray diffraction analysis (DMAX 2500; Rigaku, Tokyo, Japan) and SEM (Hitachi s4700; Jeol Ltd, Tokyo, Japan) were performed to estimate the phase transformation. The statistical analysis was done using SAS 9.1.3 (SAS institute, USA). The flexural strength data of the experimental groups were analyzed by one-way analysis of variance and to detect statistically significant differences ($\alpha$= .05). RESULTS. The mean flexural strength of sintered Vita In-Ceram YZ without autoclaving was 798 MPa. When applied aging temperature at below $125^{\circ}C$ for 10 hours, the flexural strength of Vita In-Ceram YZ increased up to 1,161 MPa. However, at above $150^{\circ}C$, the flexural strength started to decrease. Although low temperature aging caused the tetragonal-to-monoclinic phase transformation related to temperature, the minimum flexural strength was above 700 MPa. CONCLUSION. The monoclinic phase started to appear after aging treatment above $100^{\circ}C$. With the higher aging temperature, the fraction of monoclinic phase increased. The ratio of monoclinic/tetragonal + monoclinic phase reached a plateau value, circa 75% above $175^{\circ}C$. The point of monoclinic concentration at which the flexural strength begins to decrease was between 12% and 54%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.161-168
• /
• 2011

The heating, ventilating, air conditioning (HVAC) system is a very important part of an automotive vehicle: it controls the microclimate inside the passenger's compartment and removes the frost or mist that is produced in cold/rainy weather. In this study, the numerical analysis of the defrost duct in an HVAC system and the de-icing pattern is carried out using commercial CFX-code. The mass flow distribution and flow structure at the outlet of the defrost duct satisfied the duct design specification. For analyzing the de-icing pattern, additional grid generation of solid domain of ice and glass is pre-defined for conductive heat transfer. The flow structure near the windshield, streakline, and temperature fields clearly indicate that the de-icing capacity of the given defrost duct configuration is excellent and that it can be operated in a stable manner. In this paper, the unsteady changes in temperature, water volume fraction, and static enthalpy at four monitoring points are discussed.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.373-383
• /
• 1987

No-fines concrete is concrete from which the fine aggregate fraction has been omitted. The concrete so formed, consisting only of coarse aggregate, cement, and water, has large voids uniformly distributed through its mass. This study was performed to obtain the basic data which can be applied to the use of no-fines concrete. The data was based on the properties of no-fines concrete depending upon various mixing ratios. The results obtained were summarized as follows. 1. Test result of the consistency, suitable water-cement ratio was increased with the increasing of mixing ratio. 2. At the suitable water-cement ratio, the highest strengths were showed. But it gradually was decreased with the increasing of mixing ratio and strengths are considerably lower than that of conventional portland cement concrete. 3. The relations between compressive and tensile strength were highly singnificant as a straight line shaped. The strength ratio was decreased with the increasing of mixing ratio and considerably lower than of conventional portland cement concrete. 4. Bulk density was decreased with the increasing of the mixing ratio, and was similar to that of the conventional portland cement concrete at mixing ratio 1:4. 5. The relations between strength and bulk density were highly significant as a straight line shaped. The decreasing ratio of strengths was higher than that of bulk density.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.204-208
• /
• 2006

Soybean sprout decay during its culture should be one of serious problems. The study was carried out to clarify the effect of water imbibition and acetic acid treatments on growth and morphological characters of the soybean sprouts. The soybean seeds of 3 cultivars (cv. Eunhakong, Pungsannamulkong and Junjery) imbibed in pure water or 0.l% acetic acid for 3 minutes before soaked for 6 hours into 1 ppm BA solution and aerated for 3 hours immediately before 6 day culture. On the 6th day, the sprouts were classified into 4 categories on the base of hypocotyl length; > 7cm, 4 to 7cm, > 4cm and not germinated and seed floating rate, their morphological characters, fresh fraction weights and productivity were measured. The best water imbibition for seed cleaning was to soak the seeds for 5 minutes and then to aerate soak them for 40 minutes. In Pungsannamulkong and Junjery, percentage of the sprouts with hypocotyls of longer than 4 cm was higher in water imbibition than in acetic acid treatment for seed disinfection although in Eunhakong there was no significant difference between the two treatments. Eunhakong and Junjery had greater lateral root formation rate and its number per sprout in water imbibition than in acetic acid treatment but Pungsannamulkong showed reverse result. Eunhakong and Pungsannamulkong, furthermore, had more total fresh weight in acetic acid treatment than in water imbibition but Junjery showed reverse result, although there was no significant difference between the two treatments in productivity of mass production system.

• Journal of Ginseng Research
• /
• v.32 no.4
• /
• pp.291-299
• /
• 2008

The fresh ginseng roots were extracted in aqueous methanol (MeOH), and the obtained extracts were partitioned using ethyl acetate (EtOA), n-butanol (n-BuOH), and water, successively. The repeated silica gel column chromatography for n-BuOH fraction afforded a purified ginsenoside $Rg_1$. The physico-chemical, spectroscopic and chromatographic data of ginsenoside $Rg_1$, such as crystallization characteristics, melting point, specific rotation, infrared spectrometry (IR) data, fast atom bombardment/mass spectrometry (FAB/MS) data, nuclear magnetic resonance (NMR) data, retention factor (Rf) in thin layer chromatography (TLC) experiment, and retention time (r.t.) in HPLC analysis, were measured and compared with those reported in literatures. Especially, the previous literatures reported different data for ginsenoside $Rg_1$ in the $^{1}H-$ and $^{13}C$-NMR experiments. This paper gives the exactly assigned NMR data through 2D-NMR experiments, such as $^{1}H-^{1}H$ correlation spectroscopy (COSY), hetero nuclear single quantum correlation (HSQC), and hetero nuclear multiple bond connectivity (HMBC).