• Journal of Advanced Navigation Technology
• /
• v.18 no.3
• /
• pp.201-208
• /
• 2014

Due to diversification of ships and limited space of pier, when ships come alongside the shallow water or narrow pier, sea area with small mooring facilities and floating matter is frequently applied. Through these, coming alongside the various space is capable and cost effectiveness is enhanced. However, when ships, applying small mooring facilities and floating matter, come alongside, there can be some impulse by waves between the floating things and ships which possibly leads to mass disaster. Therefore, there should be forecasts and analysis of the movement caused by waves. On this study, we develop measuring system for movement analysis of mooring and floating matters which provides base data with movement traits by measuring 3-D exercise information and acceleration at mokpo maritime university marina facility. Also, the composition and principles of the developed system is explained.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.165-166
• /
• 2013

When Coming alongside the shallow water or narrow pier, they apply sea area with small mooring facilities and Floating matter because of the diversity of ships and limitation and effective in cutting expenses. However, when ships, applying Small mooring facilities and Floating matter, come alongside, there can be some impulse by waves between the Floating things and ships which possibly leads to mass disaster. Therefore, there should be forecasts and analysis of the movement caused by waves. On this Study, it introduces the composition and principles of the developed system provides the base of the movement traits through measuring 3-D exercise data and acceleration of the Mooring and Floating matters.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.417-428
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part III, the local damage of the rigid components of aircraft, e.g., engine and landing gear, impacting the steel concrete (SC) structures of NPP containment is mainly discussed. Two typical SC target panels with the thicknesses of 40 mm and 100 mm, as well as the steel cylindrical projectile with a mass of 2.15 kg and a diameter of 80 mm are fabricated. By using a large-caliber air gas gun, both the projectile penetration and perforation test are conducted, in which the striking velocities were ranged from 96 m/s to 157 m/s. The bulging velocity and the maximal deflection of rear steel plate, as well as penetration depth of projectile are derived, and the local deformation and failure modes of SC panels are assessed experimentally. Then, the commercial finite element program LS-DYNA is utilized to perform the numerical simulations, by comparisons with the experimental and simulated projectile impact process and SC panel damage, the numerical algorithm, constitutive models and the corresponding parameters are verified. The present work can provide helpful references for the evaluation of the local impact resistance of NPP buildings against the aircraft engine.

• Earthquakes and Structures
• /
• v.18 no.1
• /
• pp.27-44
• /
• 2020

This work presents a comparison of three performance-based seismic design methods (PBSD) as applied to plane steel frames having eccentric braces (EBFs) and buckling restrained braces (BRBFs). The first method uses equivalent modal damping ratios (ξ_k), referring to an equivalent multi-degree-of-freedom (MDOF) linear system, which retains the mass, the elastic stiffness and responds in the same way as the original non-linear MDOF system. The second method employs modal strength reduction factors (${\bar{q}}_k$) resulting from the corresponding modal damping ratios. Contrary to the behavior factors of code based design methods, both ξ_k and ${\bar{q}}_k$ account for the first few modes of significance and incorporate target deformation metrics like inter-storey drift ratio (IDR) and local ductility as well as structural characteristics like structural natural period, and soil types. Explicit empirical expressions of ξ_k and ${\bar{q}}_k$, recently presented by the present authors elsewhere, are also provided here for reasons of completeness and easy reference. The third method, developed here by the authors, is based on a hybrid force/displacement (HFD) seismic design scheme, since it combines the force-base design (FBD) method with the displacement-based design (DBD) method. According to this method, seismic design is accomplished by using a behavior factor (q_h), empirically expressed in terms of the global ductility of the frame, which takes into account both non-structural and structural deformation metrics. These expressions for q_h are obtained through extensive parametric studies involving non-linear dynamic analysis (NLDA) of 98 frames, subjected to 100 far-fault ground motions that correspond to four soil types of Eurocode 8. Furthermore, these factors can be used in conjunction with an elastic acceleration design spectrum for seismic design purposes. Finally, a comparison among the above three seismic design methods and the Eurocode 8 method is conducted with the aid of non-linear dynamic analyses via representative numerical examples, involving plane steel EBFs and BRBFs.

• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.461-474
• /
• 2020

Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0°, 30° and 90°, incompatible deformations are closely related to rock damage. At 60°, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.

• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.111-121
• /
• 2000

A numerical model which can analyze the flow and bed topography characteristics of a single bend and continuous one was suggested using the equations of mass, momentum, the vertical distribution of secondary flow, and the transverse bed slope. The calculated flow and bed topography characteristic values were compared with the experimental data in a single bend, and the predicted path of maximum streamwise velocity in continuous bends also compared with the Vadnal and Chang's data. The comparisons gave good results. A curved channel with 180 degrees was used. Sand and anthracite were selected as bed materials in the movable bed experiments. The model application of this model to the sand bed and the anthracite one accorded well with the observed values in the experiments. This model was proved to be useful for predicting the flow and bed topography with the change of bed materials. The results of this research could be used to construct and control curved channels as a fundamental information.mation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6715-6721
• /
• 2015

Recently, DNA data of missing person, killed person, and missing child continue to increase but most of statistical calculation for paternity confirmation is being done through manual methods or Excel. Therefore, we need development of a software which is able to facilitate both systematic management and effective analysis of Short Tandem Repeat (STR) derived from DNA data. Without extensive testing, through a twenty-month study was developed a web-based system which performs paternity analysis and kinship analysis easily based on the various options. The former uses an existing algorithm for paternity index and the latter does Identity by descent (IBD) formula. Due to our system validated over real datasets in terms of likelihood ratio and probability of paternity, it ensures increased reliability as well as effective management and analysis of DNA data in mass disaster. In addition, it includes advanced features such as an integrated environment, user-centered interface, process automation and so on.

• Ocean and Polar Research
• /
• v.32 no.4
• /
• pp.351-359
• /
• 2010

This study examined extensive patches of floating green macroalgal (Ulva prolifera) mats in the northern East China Sea (ECS) using satellite images from mid May through July 2008 and field observation made during early August 2008 cruise. It was previously reported that the massive macroalgal blooms occurred in the coastal areas of Qingdao in China. During our field survey, researchers noticed widely distributed floating patches of macroalgal mats ranging in size from tens of centimeters to a few hundred meters in diameter. Meteorological data in the northern ECS showed high irradiance, high air-temperature, and predominant southerly winds in summer. In the study area during the survey period, surface waters were characterized by the Changjiang Diluted Water (CDW) mass, which contained high concentrations of nitrate and phosphate. The internal transcribed spacer (ITS) sequence of U. prolifera found in the northern ECS was the same as those of U. prolifera sampled from Qingdao blooms, suggesting a possibility that U. prolifera found in two regions would be derived from the same origin. We suggest that U. prolifera in the nearshore Jiangsu Province drifted into the northern ECS and proliferated under favorable meteorological and oceanographic conditions during the summer of 2008.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.415-421
• /
• 2004

Litter wastes on highway runoff are gradually being considered one of the major pollutants of concern in protecting the integrity of receiving waters for beneficial use. The California State Water Resources Control Board has identified in their 303(d) list at least 36 water bodies where trash or litter is considered a pollutant of concern. The first TMDL adopted by the Region 4 (Los Angeles area) of the California State Water Quality Control Board was for trash in the Los Angeles River. The first flush characteristic study was developed to obtain first flush water quality and litter data from representative stormwater runoff from standard highway drainage outfalls in the Los Angeles area. Total captured gross pollutants in stormwater runoff were monitored at six Southern California highway sites over two years. The gross pollutants were 90% vegetation and 10% litter. Approximately 50% of the litter was composed of biodegradable materials. The event mean concentrations show an increasing trend with antecedent dry days and a decreasing trend with total runoff volume or total rainfall. Event mean concentrations were ranged 0.0021 to 0.259g/L for wet gross pollutants and 0.0001 to 0.027g/L for wet litters. The first flush phenomenon was evaluated and the impacts of various parameters such as rainfall intensity, drainage area, peak flow rate, and antecedent dry period on litter volume and loading rates were evaluated. First flush phenomenon was generally observed for litter concentrations, but was not apparent with litter mass loading rates. Litter volume and loading rates appear to be directly related to peak storm intensity, antecedent dry days and total flow volume.

• Structural Engineering and Mechanics
• /
• v.37 no.6
• /
• pp.671-684
• /
• 2011

Deciding on an optimal sensor placement (OSP) is a common problem encountered in many engineering applications and is also a critical issue in the construction and implementation of an effective structural health monitoring (SHM) system. The present study focuses with techniques for selecting optimal sensor locations in a sensor network designed to monitor the health condition of Dalian World Trade Building which is the tallest in the northeast of China. Since the number of degree-of-freedom (DOF) of the building structure is too large, multi-modes should be selected to describe the dynamic behavior of a structural system with sufficient accuracy to allow its health state to be determined effectively. However, it's difficult to accurately distinguish the translational and rotational modes for the flexible structures with closely spaced modes by the modal participation mass ratios. In this paper, a new method of the OSP that computing the mode shape matrix in the weak axis of structure by the simplified multi-DOF system was presented based on the equivalent rigidity parameter identification method. The initial sensor assignment was obtained by the QR-factorization of the structural mode shape matrix. Taking the maximum off-diagonal element of the modal assurance criterion (MAC) matrix as a target function, one more sensor was added each time until the maximum off-diagonal element of the MAC reaches the threshold. Considering the economic factors, the final plan of sensor placement was determined. The numerical example demonstrated the feasibility and effectiveness of the proposed scheme.