• Journal of the Semiconductor & Display Technology
• /
• v.15 no.2
• /
• pp.55-60
• /
• 2016

This study was developed through the secondary battery module charging/discharger possible utilization in the production process equipment circuit. The developed module is ensuring construction of efficient and productive charging and discharger through this research a limit on the yield and the price of existing single -channel charge and discharger circuit as a 5V 70A grade secondary battery Formation charge and discharger for up to 1 board 4 channels. In order to improve the sensing accuracy, through a robust differential amplifier circuit described using 16bit Analog-Digital Converter and noise was secured 16bit resolution sensing. The configuration also made demands for property Rise / Fall Time. Data Acquisition, discharge efficiency and also to fit the sink circuit temperature level for mass production.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.4
• /
• pp.219-223
• /
• 2000

The evaluation of habitability to building vibration is conducted by the values of natural frequency, amplitude displacement, damping ratio. These values can be obtained from test or analytical results. Data acquisition through test may be possible in existing building, however, to estimate the serviceability of the building, it is necessary to evaluate those values at the stage of design. The natural frequency is important and basic factor for the evaluation of the serviceability. Calculation method of the effective stiffness in RC slab is proposed. To prove the efficiency of the proposed method, sample results of the analysis and the test are compared. These results proved that the effective width proposed to calculate the effective stiffness is proper to evaluate the natural frequency.

• ETRI Journal
• /
• v.31 no.2
• /
• pp.237-239
• /
• 2009

A whole-body voxel model of a 7-year-old male volunteer was developed from 384 axial magnetic resonance images (MRIs). The MRIs were acquired with intervals of 3 mm for the entire body in a body coil. In order to reduce the MRI acquisition time for the child, the repetition and echo times under T1 weighted image were chosen to be 566 ms and 8 ms, respectively. The MRIs were classified according to 30 types of tissues with known electrical parameters. The developed voxel model was adjusted to the physical average of 7-year-old Korean boys. The body weight of the adjusted model, calculated with the mass tissue densities, is within a 6% difference from the 50th percentile weight.

• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.193-210
• /
• 2018

Purpose: The purpose of this study is to escape from the existing defense quality policy focused on government-led quality assurance for mass-produced items and to secure quality reliability of weapon systems through a defense quality policy paradigm shift based on designing a verification systems anchored on reliability through the enhancement of military supply quality control in the development stage, the enhancement of quality responsibility of the manufacturing contractor and other methods. Methods: For the shift to the quality-based defense quality policy, the status and the problems of the status quo are analyzed and the direction of future defense quality policy is suggested based on literature review of the concept of reliability and reliability in the field of defense, on case studies of global corporations and their quality policies, on the background on quality assurance in defense, and on case studies of quality policies in other government organizations, Results: Based on the case studies of quality policies in global corporations and other government agencies, the importance of preventive quality control from the early development stages, quality control based on the reliability of the materials and parts, and shift of the quality policy to a certification system to achieve these objectives were highlighted. Conclusion: To secure reliability of weapon system quality, the quality policy must be shifted to a system focused on reliability-based design and verification and there is a further need to enhance the operational efficiency and capacity of DTaQ based on studies and evaluation of weapon system reliability.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.8
• /
• pp.1-9
• /
• 2019

With the development of imaging information communication technology in modern society, imaging acquisition and mass production technology have developed rapidly. However, crime rates using these technology are increased and forensic studies are conducted to prevent it. Identification techniques for image acquisition devices are studied a lot, but the field is limited to images. In this paper, camera model identification technique for video, not image is proposed. We analyzed video frames using the trained model with images. Through training and analysis by considering the frame characteristics of video, we showed the superiority of the model using the P frame. Then, we presented a video camera model identification system by applying a majority-based decision algorithm. In the experiment using 5 video camera models, we obtained maximum 96.18% accuracy for each frame identification and the proposed video camera model identification system achieved 100% identification rate for each camera model.

• 한국해양학회지
• /
• v.27 no.1
• /
• pp.19-34
• /
• 1992

Marine seismic refraction surveys have been carried out by Korea Institute of Geology, Mining and Materials(KIGAM) since 1984. The recording of refraction data was based on analog instrumentation. Therefore the resolution of refraction data was not good enough to distinguish many layers. The objective of the interpretation of seismic refraction data is the determination of intervals and critically refracted seismic wave propagation velocities through the layers beneath the sea floor. To determine intervals and velocities precisely, the resolution of refraction data should be enhanced. The intent of the study is to improve the quality of shallow marine refraction data by the digital technique using microcomputer- based acquisition and processing system. The system consists of an IBM AT microcomputer clone, an analog-digital(A/D) converter. A mass storage unit and a parallel processing board. The A/D converter has 12 bits of precision and 250 kHz of conversion rate. The magneto-optical disk drive is used for the mass storage of seismic refraction data. Shallow marine seismic refraction surveys have been carried out using the system at 6 locations off Ulsan and Pusan area. The refraction data were acquired by the radio sonobuoy. The refraction profiles have been produced by the laser printer with 300 dpi resolution after the basic computer processing. 5-9 layers were interpreted from digital refraction profiles, whereas 2-4 layers were interpreted from analog refraction profiles. the propagation velocities of sediments were interpreted as 1.6-2.1 km/sec. The propagation velocities of acoustic basement were interpreted as 2.4-2.7 km/sec off Ulsan area, 4.8 km/sec off Pusan area.

• Journal of the Korean Society of Food Culture
• /
• v.8 no.4
• /
• pp.337-348
• /
• 1993

This study was carried out to investigate the succession patterns of dietary culture and to find out all the educational problems with female college students in both countries as the central figure. The results are as follows. The degree of knowledge acquisition about food of annual custom is 58% in Korea and 72% in Japan. What the rate of knowledge acquisition is high among both countries’ similar food of annual custom are ${\ulcorner}Seolnal(Gantan){\lrcorner}$, ${\ulcorner}Sambok(Doyonohi){\lrcorner}$, and ${\ulcorner}Chuseok(Tsukimi){\lrcorner}$. Cooking experience of festive food is 45% in Korea and 58% in Japan. Among both countries' common festive food what cooking experience is high in Korea are ${\ulcorner}Seolnal{\lrcorner}$ and ${\ulcorner}Chuseok{\lrcorner}$, which are over 97%. In Japan those are ${\ulcorner}Gantan{\lrcorner}$ and ${\ulcorner}Tsukimi{\lrcorner}$, which are over 80%. Regarding learning experience of festive food ${\ulcorner}Seolnal{\lrcorner}$ and ${\ulcorner}Gantan{\lrcorner}$ are beyond 80% and ${\ulcorner}Chuseok{\lrcorner}$ is 88%. In Japan ${\ulcorner}Tsukimi{\lrcorner}$ is 71% and ${\ulcorner}Omisoka{\lrcorner}$ is 85%. The learning sources of food of annual custom are parents and schools in common, and Korea has another learning sources, mass communication. Festive food that is cooked shows much similarity between two countries, but each country has originality. As common food of annual custom ${\ulcorner}Seolnal{\lrcorner}$ has nine kinds of food, ${\ulcorner}Sambok{\lrcorner}$ has three kinds, and ${\ulcorner}Chuseok{\lrcorner}$ has five kinds in Korea In Japan ${\ulcorner}Gantan{\lrcorner}$ has fourteen kinds of food, ${\ulcorner}Doyonohi{\lrcorner}$ has three kinds, and ${\ulcorner}Tsukimi{\lrcorner}$ has five kinds. The successive consciousness about food of annual custom is concentrated on a specific food in Korea. And Japanese consciousness is shown as an expansion-type on diverse food. Korean successive consciousness is 69.4% and Japanese consciousness is 82%. The higher the rate of knowledge acquisition, cooking experience, and learning experience are in both countries, the higher successive consciousness is. So we must note for the importance of home and school’s education.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.5
• /
• pp.289-294
• /
• 2011

A rapid and specific high performance liquid chromatography-tandem mass (LC/MS/MS) method for the analysis of montelukast in human plasma has been developed and validated. After cold acetonitrile-induced precipitation of the plasma samples, montelukast and glipizide (internal standard, IS) were eluted on a reverse-phase $C_{18}$ column by isocratic mobile phase consisted of 10 mM ammonium formate buffer (adjusted to pH 3.5 with formic acid) and acetonitrile (3:97, v/v). Acquisition was performed with multiple reaction monitoring (MRM) mode by monitoring the transitions: m/z 587.2${\rightarrow}$ 423.2 for montelukast and m/z 446.0${\rightarrow}$321.2 for IS. Ranges of concentration for calibration curves (10-1000 ng/mL) showed correlation coefficients ($r^2$) were better than 0.9948. Precision of intra- and inter-day ranged from 3.70 to 11.68% and from 3.04 to 12.95%, accuracy of intra-day and inter-day ranged from 93.34 to 102.75% and from 100.79 to 107.63%, respectively. The described method provides a fast and sensitive analytical tool for determining montelukast levels in plasma, and was successfully applied to a pharmacokinetic study in 16 healthy human subjects after oral administration of 10mg tablet formulation of montelukast sodium under fasting conditions.

• Journal of Environmental Analysis, Health and Toxicology
• /
• v.21 no.4
• /
• pp.229-236
• /
• 2018

In this study, inter-laboratory comparison was done using elemental analyzer-isotope ratio mass spectrometers (EA-IRMSs) to determine carbon and nitrogen contents as well as stable carbon and nitrogen isotopic compositions (${\delta}^{13}C$ and ${\delta}^{15}N$) of five environmental samples containing lake and marine sediments, higher plant leaves, and fish muscle, and one organic analytical standard (Protein (Casein) Standard OAS). Five national laboratories participated in this comparison study, and each laboratory analyzed all five samples and the analytical standard. Results showed that variations in total organic carbon (TOC) and total nitrogen (TN) contents as well as ${\delta}^{13}C_{TOC}$ and ${\delta}^{15}N_{TN}$ values among the laboratories were large compared to the analytical uncertainties. The results highlighted the inhomogeneity of the test samples and thus, the need to select suitable standard reference materials for future inter-laboratory studies. Further inter-laboratory comparison exercises could promote good measurement practices in the acquisition of stable carbon and nitrogen isotopic composition data.

• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.189-193
• /
• 2006

In this study we propose an automatic reading system for diagnostic DNA chips. We define a general specification for an automatic reading system and propose a possible implementation method. The proposed system performs the whole reading process automatically without any user intervention, covering image acquisition, image analysis, and report generation. We applied the system for the automatic report generation of a commercialized DNA chip for cervical cancer detection. The fluorescence image of the hybridization result was acquired with a $GenePix^{TM}$ scanner using its library running in HTML pages. The processing of the acquired image and the report generation were executed by a component object module programmed with Microsoft Visual C++ 6.0. To generate the report document, we made an HWP 2002 document template with marker strings that were supposed to be searched and replaced with the corresponding information such as patient information and diagnosis results. The proposed system generates the report document by reading the template and changing the marker strings with the resultant contents. The system is expected to facilitate the usage of a diagnostic DNA chip for mass screening by the automation of a conventional manual reading process, shortening its processing time, and quantifying the reading criteria.