• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.18-25
• /
• 2008

The functional non-woven fabrics have been applied in various industry fields, such as clothing, hygiene, environment, medical and so forth. The functional non-woven fabrics were manufactured by meltblown and finishing processes. These functional non-woven fabrics were based on 5wt% masterbatch using 2,000ppm nano-silver resin composite. Silver is one of the most universal antimicrobial substances. Nano-technology enables us to expand the surface area of silver particles markedly. Silver nano particles were successfully produced less than 50nm in size. The functional non-woven fabrics including nano-silver particles showed excellent antibacterial activities against Staphylococcus aureus (ATCC 6538) and Klebsieila pneumoniae (ATCC 4352). From the results, functional non-woven fabrics including silver nano particels probably will be available as a good and safe antibiotic alternative, such as mask medium filter, water purifier filter, hygiene wet tissues, marine products pad and so forth.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.854-859
• /
• 2009

USN(Ubiquitous Sensor Network)을 이용한 많은 시범사업들이 진행되었으며, 최근에는 환경감시 분야에서 활용이 많은 관심을 받고 있다. USN의 센서노드로부터 정보를 획득하기 위해서는 RF 송수신기가 반드시 필요하다. 본 논문은 IEEE 802.15.4의 규격을 만족하면서 2.4GHz 대역에서 동작하는 센서노드용 RF 송수신기의 설계에 대해서 기술한다. 본 논문에는 구현하려는 송수신기의 구조와 IEEE 802.15.4의 요구 규격이 기술되어 있으며, 이 규격으로부터 도출된 RF 송수신기의 설계 파라미터로써 수신기의 잡음지수, 필터의 선택도, 주파수합성기의 위상잡음, 송신기의 선형성과 스펙트럼 마스크가 기술되어 있다.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.418-424
• /
• 2005

We present the design, fabrication and experimental results of 4-bit digital microinjectors, whose ejected droplet volumes are adjusted by the digital operation of a 4-bit microheater array. We design the reference microinjectors as well as its comparative test structures. In the fabrication process, we use a five-mask micromachining process and the total chip size of the fabricated microinjector is $7,640{\mu}m{\times}5,260{\mu}m.$ We measure the ejected droplet volumes and velocities, which are adjusted from $12.1{\pm}1.0~55.6{\pm}14.7pl\;and\;2.3{\pm}0.1~15.7{\pm}0.8m/s.$ respectively, depending on the 15 possible combinations of 4-bit microheater array. We also experimentally characterize the effect of geometric variation including the microheater size, inter-microheater gap, microchannel width and sequential operation of microheater array on the ejected droplet volume and velocity. Among these parameters, we find that the microheater size is the most dominant parameter affected to the ejected droplet volumes and velocities. Thus, the present microinjector has a potential for application to the high-resolution inkjet printers with multiple gray levels or high-precision fluid injectors with variable volume control.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권1호
• /
• pp.25-29
• /
• 2008

We introduce a new fabrication process for antireflective structured surfaces. A 4-inch silicon wafer was dipped in a suspension of 300-nm-diameter silica particles dispersed in a toluene solution. When the wafer was drawn out of the suspension, a hexagonally packed monolayer structure of particles self-assembled on almost the complete wafer surface. Due to the simple process, this could be applied to micro- and nano-patterning. The self-assembled silica particles worked as a mask for the subsequent reactive ion etching. An array of nanometer-sized pits could be fabricated since the regions that correspond to the small gaps between particles were selectively etched off. As etching progressed, the pits became deeper and combined with neighboring pits due to side-etching to produce an array of cone-like structures. We investigated the effect of etching conditions on antireflection properties, and the optimum shape was a nano-cone with height and spacing of 500 nm and 300 nm, respectively. This nano-structured surface was prepared on a $30\;{\times}\;10-mm$ area. The reflectivity of the surface was reduced 97% for wavelengths in the range 400-700 nm.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.101-106
• /
• 2016

A pupil filter is a useful technique for modifying the light intensity distribution near the focus of an optical system to realize depth of field (DOF) extension and superresolution. In this paper, we proposed a new design of the phase only pupil filter by using Zernike polynomials. The effect of design parameters of the new filters on DOF extension and superresolution are discussed, such as defocus Strehl ratio (S.R.), superresolution factor (G) and relative first side lobe intensity (M). In comparison with the other two types of pupil filters, the proposed filter presents its advantages on controlling both the axial and radial light intensity distribution. Finally, defocused imaging simulations are carried out to further demonstrate the effectiveness and superiority of the proposed pupil filter on DOF extension and superresolution in an optical imaging system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.454-459
• /
• 2013

For the purpose of rapid development and superior design quality assurance, sophisticated finite element model for SOM(Spatial Optical Modulator) piezo actuator of MOEMS device has been developed and evaluated for the accuracy of dynamics and residual stress analysis. Parametric finite element model is constructed using ANSYS APDL language to increase the design and analysis performance. Geometric dimensions, mechanical material properties for each thin film layer are input parameters of FE model and residual stresses in all thin film layers are simulated by thermal expansion method with psedu process temperature. $6^{th}$ mask design samples are manufactured and $1^{st}$ natural frequency and 10V PZT driving displacement are measured with LDV. The results of experiment are compared with those of the simulation and validate the good agreement in $1^{st}$ natural frequency within 5% error. But large error over 30% occurred in 10V PZT driving displacement because of insufficient PZT constant $d_{31}$ measurement technology.

• 한국의류학회지
• /
• 제32권8호
• /
• pp.1264-1273
• /
• 2008

The purpose of this study is to analyze protection functionality of supermodern fashion which is shown by responding to supermodern environment, where non-spaces increases in the 21st modern city. The theoretical background is drawn for supermodern environment theory. For the study, he researcher used existing study and specialized book and analyzed photograph materials by selecting them in specialized fashion book, internet site and designer's collection. The works from 1995 S/S collection to 2008 S/S collection are analyzed. The result of this study is as follow. First, supermodern design is adopting the shape of high-functional element, electronic device, protective device to protect wearer in non-space. Second, in order to mentally protect individual anonymous leadership of interaction is granted by adopting hood, veil or mask. Third, supermodern design is creating independent and user-based space by shape transformation in change of urban environment. Fourth, in order to protect wearer through camouflage or concealment, camouflage pattern or neutral color are used.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.73-78
• /
• 2012

In this study, the optimal process condition was induced about the pillar arrangement process of applying the screen printing method in the manufacture process of vacuum glazing panel. The high precision screen printing is technology which pushes out the paste and spreads it by using the squeegee on the stainless steel plate in which the pattern is formed. The screen printing method is much used in the flat panel display field including the LCD, PDP, FED, organic EL, and etc for forming the high precision micro-pattern. Also a number of studies of screen printing method have been conducted as the method for the cost down through the improvement of productivity. The screen printing method has many parameters. So we used Taguchi method in order to decrease test frequencies and optimize this parameters efficiently. In this study, experiments of pillar arrangement were performed by using Taguchi experimental design. We analyzed experimental results and obtained optimal conditions which are 4 m/s of squeegee speed, $40^{\circ}$ of squeegee angle and distance between metal mask and glass.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.447-454
• /
• 2006

Although there are many needs to use 3D models in MEMS field, it is not easy to generate 3D models based on MEMS CAD. This is because MEMS CAD is based on 2D and their popular format-GDSII file format- has its own limits and problems. The differences between GDSII file format and 3D CAD system, such as (1) superposed modeling, (2) duplicated entity, (3) restricted of entity type, give rise to several problems in data exchange. These limits and problems in GDSII file format have prevented 3D CAD system from generating 3D models from the MEMS CAD. To remove these limits and solve problems, it is important to extract the silhouette of data in the MEMS CAD. The proposed method has two main processes to extract silhouette; one is to extract the pseudo-silhouette from the original 2D MEMS data and the other is to remove useless objects to complete the silhouette. The paper reports on the experience gained in data exchange between 2D MEMS data and 3D models by the proposed method and a case study is presented, which employs the proposed method using MEMS CAD IntelliMask and Solidworks.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.211-223
• /
• 2007

21 Century is said the age of cultural industry. In this cultural Industry one of very important factors which guides this times is the exploitation of cultural goods, which is based on regional identity. Therefore, at this point of time when its weighty has been raised, the aim of this study is to fill the image Korean tradition and modernity culture in them, through the search on their characteristics among regions and nations, desk the cultural service goods which gets survival power of traditional and cultural identity. Nine existing Hahoe masks are changed into nine new cultural items, which are presented the nine dreams of Hahoe masks. As consumer's choice is diversified by a set of products, main concept in this study is the focus on modernity, rationality, traditionality and popularity. The main concept of this study is on rational functions and convenience, the harmony of tradition and modernity. As said above, in the process of manufacture the mass production of goods is stressed, and by getting the composition and making a set of goods, the choice of consumers will be extended. Getting ideal globalization by the coexistence of tradition and modernity on goods, is very important. Consequently, cultural goods must be recognized as a factor of its medium, and also, on domestic cultural goods people's interest must be risen all the more.