• 제목/요약/키워드: Maru

검색결과 121건 처리시간 0.023초

소너 화상을 이용한 어군량 추정에 관한 연구 (A Study on the Estimation of Fish School Abundance Using Sonar Image)

  • 이유원
    • 수산해양기술연구
    • /
    • 제39권2호
    • /
    • pp.92-98
    • /
    • 2003
  • 소너를 이용한 어군량 조사에서 자동화가 용이하고 고기의 분포상태에 관계없이 측정이 가능한 에코적분법에 관한 정량화법의 기초 연구로서, 소너 화상의 휘도를 2 승 적분하여 어군량을 정량화하고 이 값을 다른 어군량 지표와 비교, 분석한 결과를 요약하면 다음과 같다. 1. 휘도를 이용하여 작성한 에코그램으로부터 어군과 해저를 분명하게 식별하는 것이 가능하여 화상을 이용한 어군량의 정량화에 있어서 휘도는 유용한 정보이다. 2. 소너 화상으로부터 계수법에 의하여 얻어진 어군의 수는 픽셀 휘도의 2승 적분치에 정의 상관을 나타내었으나, 어군의 계수법은 어군의 규모에 관계하지 않고 어군을 계수하기 때문에 오차가 클것으로 판단되어 정량화법으로서는 좋은 방법이라 할 수 없다. 3. 면적측정법으로 계측된 어군면적은 픽셀 휘도의 2승 적분치에 비례하고 유의한 상관을 나타내었으므로, 어군량 지표로서 유용 가능하다고 판단된다. 4. 소너 화상의 휘도를 2 승 적분하여 얻어진 어군량 정보는 고기의 분포상태에 관계없이 측정이 가능하여 어군량을 정량화하는 방법으로서 유용할 것으로 판단된다.

그룹 이동성을 가지는 무선 네트워크에서 이동 적응적인 라우팅 업데이트 구조 (Mobility-Adaptive Routing Update Scheme for Wireless Networks with Group Mobility)

  • 강현제;임성국;전한얼;이재용;박수범;유영빈
    • 한국통신학회논문지
    • /
    • 제37권1B호
    • /
    • pp.39-49
    • /
    • 2012
  • 다수의 노드들이 유사한 이동 특성을 보이는 그룹 이동성을 고려하였을 때, 동일 그룹에 속한 노드간의 상대 속도는 작기 때문에 그룹 내 라우팅 업데이트 주기를 길게 설정하여 라우팅 오버헤드를 최소화하는 것이 가능하지만, 수집된 정보의 정확성이 저하되기 때문에 상대 속도가 큰 그룹 간의 패킷 전송 성공률이 감소된다. 그룹 간의 라우팅 오버헤드를 패킷 전송 성공률의 저하 없이 감소시키기 위해 이동 적응적인 라우팅 업데이트 구조가 본 논문에서 제안된다. 제안하는 알고리즘은 각 그룹 단위로 이동성을 예측을 하고 이를 통해 라우팅 업데이트 주기를 유동적으로 조절하여 라우팅 오버헤드를 감소시킨다. 또한 적절한 인접 그룹을 중계(relay) 그룹으로 설정하여, 추후 이동성에 의해 두 그룹간의 직접적인 연결이 단절되더라도 중계 그룹을 통해 통신이 원활이 유지될 수 있도록 지원함으로써 오버헤드가 감소하고 패킷 전송 성공률이 높아지게 된다.

귀촌형 공동체마을 단독주택의 개성화 - 남원 '작은마을'의 사례연구 - (Personalization of Detached Houses in the Back-to-countryside Community Village - Case Study of the 'Jagun-Maul' in Namwon -)

  • 박경옥;이상운;류현수;황진아
    • 한국주거학회논문집
    • /
    • 제23권1호
    • /
    • pp.79-88
    • /
    • 2012
  • The purpose of this study is to determine the personalizing characteristics of detached housing that reflect the housing needs according to the residents' participation in the back-to-countryside community village. For this study, 15 households of Jagun-maul at Namwon in Jeonbuk provided responses to the semi-structured questionnaire on housing consciousness, housing needs, and views on lifestyle. In addition, 15 plans were analyzed about the shape of the plan, the composition of LDK, the type of access, and the type of special space. The results were as follows. 1) The number of households under the elementary education stage was larger than the number of households above the middle education stage. Most of the households revealed the housing consciousness of 'house as resting place'. Households under the elementary education stage showed a housing consciousness for family-oriented life and households above the middle education stage showed a housing consciousness to interact with neighbors. 2) Households under the elementary education stage preferred LK style while households above the middle education stage preferred LDK style. Most of the floor plans had a front entrance and sliding door for the access from living room to garden. 3) Special spaces such as a loft, 'Ondolbang' (room with underfloor heating), study, maru, 'Toenmaru' (narrow wooden porch), family room, workroom, and toilet with outside door were arranged on each floor plan.

MATLAB/Simulink를 이용한 오프그리드형 고효율 태양광 충전 시스템 설계 (Design of an Off Grid type High efficiency Solar charging system Using MATLAB/Simulink)

  • 미흐렛 가아브레슬라세 마루;김민;변기식;김관형
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.735-737
    • /
    • 2017
  • An Off grid or remote solar electric systems are an energy supply to our home or to our companies without the utility of Grid at all. Off grid solar systems are very important for those who live in remote locations especially for developing countries where getting the electric grid is extremely expensive, inconvenient or for those who doesn't need to pay a monthly bill with the electric bill in general. The main critical components of any solar power system or renewable energy harvesting systems are the energy storage systems and its charge controller system. Energy storage systems are the essential integral part of a solar energy harvesting system and in general for all renewable energy harvesting systems. To provide an optimal solution of both high power density and high energy density at the same time we have to use hybrid energy storage systems (HESS), that combine two or more energy storage technologies with complementary characteristics. In this present work, design and simulation we use two storage systems supercapacitor for high power density and lithium based battery for high energy density. Here the system incorporates fast-response supercapacitors to provide power to manage solar smoothing and uses a battery for load shifting. On this paper discuss that the total energy throughout of the battery is much reduced and the typical thermal stresses caused by high discharge rate responses are mitigated by integrating supercapacitors with the battery storage system. In addition of the above discussion the off grid solar electric energy harvesting presented in this research paper includes battery and supercapacitor management system, MPPT (maximum power point tracking) system and back/boost convertors. On this present work the entire model of off grid electric energy harvesting system and all other functional blocks of that system is implemented in MATLAB Simulink.

  • PDF

Study on the Affects of Mounting Axisymmetric Inlet to Airframe

  • Ando, Yohei;Matsuo, Akiko;Kojima, Takayuki;Maru, Yusuke;Sato, Tetsuya
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.699-702
    • /
    • 2004
  • In this study, the affect of mounting axisymmetrical supersonic inlet to airfoil, which has 65 degree swept angle was numerically investigated. The parameter for this calculation are tree stream Mach number M=2.0 and 2.5, the distance between inlet spike and airfoil lower surface $L_{sw}$/$R_{cowl}$ = 1.21-1.54 and angle of attack to the airfoil 0-4. The mass capture ratio improved 3points in M=2.0 condition and 1points in M=2.5 while the mass capture ratio without airfoil surface was 57% and 71 % for each case. These are the result from increase of density and change of velocity deflection by the shock wave structure formed between inlet and airfoil surface. On the other hand, the distortion of Mach number at cowl lip plane increased by 13% in M=2.0, 3% in M=2.5 condition. The effects of the angle attack on the mass capture ratio is greater than that of the shock wave interaction between inlet and cowl, but the effects to the distortion is smaller in the range of this calculation condition. In the condition of M=2.0 with 4 degrees of angle of attack, inlet distortion of Mach number is mainly caused by the affects of the shock wave interaction between inlet and airfoil surface, while the largest angle of the velocity vector in the radial direction at cowl lip plane is caused by the affect of angle of attack. This large velocity vector made the flow inside the cowl subsonic and caused spillage, which interfere with the boundary layer of airfoil surface.

  • PDF

Experimental Study of the Multi-Row Disk Inlet

  • Maru, Yusuke;Kobayashi, Hiroaki;Kojima, Takoyuki;Sato, Tetsuya;Tanatsugu, Nobuhiro
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.634-643
    • /
    • 2004
  • In this paper are presented a concept of a new supersonic air inlet, which is designated a Multi-Row Disk (MRD) inlet, aiming at performance improvement under off-design conditions, and results of wind tunnel tests examined performance characteristics of the MRD inlet. The MRD inlet is frequently called ‘a skeleton inlet’ because of its appearance. The performance of a conventional axisymmetric inlet with a solid center body (spike) deteriorates under off-design Mach number conditions. It is due to the fact that total pressure recovery (TPR) governed by the throat area of inlet and mass capture ratio (MCR) governed by an incidence position of an oblique shock from the spike tip into the cowl can not be controlled independently in such air inlet. The MRD inlet has the spike that is composed of a tip cone and several disks arranged downstream of it, based on the experimental fact that several deep cavities on a conical surface have little negative effect on the boundary layer growth. The overall spike length of the MRD inlet is adjustable to the given flight speed by changing space between disks so that a spillage flow can be controlled independently from controlling the throat area. It could be made clear from the result of wind tunnel tests that the MRD inlet improves TPR by 10% compared with a conventional inlet with a solid spike under off-design conditions.

  • PDF

서울 근교 농촌주택에 있어서 식사 및 취사공간에 관한 사례 연구 -경기도 용인군 용인읍 삼가 3리 마을을 중심으로- (A Casestudy on the Eating and the Cooking Spaces of Farmhouse in Suburban Area)

  • 윤정숙
    • 대한가정학회지
    • /
    • 제26권4호
    • /
    • pp.87-100
    • /
    • 1988
  • The purpose of this study was to investigate the dweller's housing needs through the connection between dwellers' living pattern and space usage. The objectives were (1) to examine how to eat and cook in the eating and cooking spaces, (2) to examine how to alter the original housing, (3) to research the dwellers' housing needs for the eating and cooking spaces, and the changing process of dwellers' housing needs, and (4) to classify the type of eating and cooking spcaces. The results of this study were (1) there were changed in eating pattern of space usage according to the season. The eating activities were a Korean living pattern : sitting on the floor and eating at the BAB SANG. (2) There was a difference in the pattern of space usage and the activity for main cooking and KIM CHI. (3) AN BANG (eating space for winter) as well as MARU (eating space for summer) has changed to a larger space. (4) By the changing of living patterns, BU AUK (a main cooking space ) has showed a various alternations: function, dimension of space, facilities, floor materials and floor level. (5) The dwellers' housing needs for eating space were a multipurpose room, and a dining kitchen of western living pattern (using a dining table and chairs) with the present changing life styles. (6) The dwellers' housing needs for cooking space were a multipurpose room of working area, a seperation of heating area, a western living pattern, a plan of flat fllor level and a dining kitchen. (7) BU AUK of eating and cooking spaces was classified into 4 types: a traditional type, a mixing type, a modernized type, and a western type.

  • PDF

음향도플러유향유속계를 이용한 꽁치어군의 유영속도 측정 (Swimming speed measurement of Pacific saury (Cololabis saira) using Acoustic Doppler Current Profiler)

  • 이경훈;이대재;김형석;박성욱
    • 수산해양기술연구
    • /
    • 제46권2호
    • /
    • pp.165-172
    • /
    • 2010
  • This study was performed to estimate the swimming velocity of Pacific saury (Cololabis saira) migrated offshore Funka Bay of Hokkaido using an acoustic Doppler current profiler (OceanSurveyor, RDI, 153.6kHz) established in T/S Ushio-maru of Hokkaido University, in September 27, 2003. The ADCP's doppler shift revealed as the raw data that the maximum swimming velocity was measured 163.0cm/s, and its horizontal swimming speed and direction were $72.4{\pm}24.1\;cm/s$, $160.1^{\circ}{\pm}22.3^{\circ}$ while the surrounding current speed and direction were $19.6{\pm}8.4\;cm/s$, $328.1^{\circ}{\pm}45.3^{\circ}$. To calculate the actual swimming speed of Pacific saury in each bins, comparisons for each stratified bins must be made between the mean surrounding current velocity vectors, measured for each stratified bin, and its mean swimming velocity vectors, assumed by reference (threshold > -70dB) and 5dB margin among four beams of ADCP. As a result, the actual averaged swimming velocity was 88.6cm/s and the averaged 3-D swimming velocity was 91.3cm/s using the 3-D velocity vector, respectively.

Characteristics and Outcomes of Patients with Bicycle-Related Injuries at a Regional Trauma Center in Korea

  • Lee, Yoonhyun;Lee, Min Ho;Lee, Dae Sang;Kim, Maru;Jo, Dae Hyun;Park, Hyosun;Cho, Hangjoo
    • Journal of Trauma and Injury
    • /
    • 제34권3호
    • /
    • pp.147-154
    • /
    • 2021
  • Purpose: We analyzed the characteristics and outcomes of patients with bicycle-related injuries at a regional trauma center in northern Gyeonggi Province as a first step toward the development of improved prevention measures and treatments. Methods: The records of 239 patients who were injured in different types of bicycle-related accidents and transported to a single regional trauma center between January 2017 and December 2018 were examined. This retrospective single-center study used data from the Korea Trauma Database. Results: In total, 239 patients experienced bicycle-related accidents, most of whom were males (204, 85.4%), and 46.9% of the accidents were on roads for automobiles. Forty patients (16.7%) had an Injury Severity Score (ISS) of 16 or more. There were 125 patients (52.3%) with head/neck/face injuries, 97 patients (40.6%) with injuries to the extremities, 59 patients (24.7%) with chest injuries, and 21 patients (8.8%) with abdominal injuries. Patients who had head/neck/face injuries and an Abbreviated Injury Score (AIS) ≥3 were more likely to experience severe trauma (ISS ≥16). In addition, only 13 of 125 patients (10.4%) with head/neck/face injuries were wearing helmets, and patients with injuries in this region who were not wearing helmets had a 3.9-fold increased odds ratio of severe injury (AIS ≥2). Conclusions: We suggest that comprehensive accident prevention measures, including safety training and expansion of safety facilities, should be implemented at the governmental level, and that helmet wearing should be more strictly enforced to prevent injuries to the head, neck, and face.

현대 아파트 평면도와 한옥표준평면도의 공간배치 특성 비교 연구 (A Comparative Study on the Spatial Layout Characteristics of Modern Apartment Floor Plan and 'Standard Korea Traditional-Houses Floor Plan')

  • 황용운
    • 한국산학기술학회논문지
    • /
    • 제20권8호
    • /
    • pp.271-278
    • /
    • 2019
  • 본 연구는 현대의 대표적인 주거양식인 아파트 공간과 우리 전통미를 살린 한옥표준평면도의 공간 배치 등을 비교 분석한 것이다. 연구 방법은 객관적인 분석을 위하여 공간구문론(Space Syntax)을 이용하여 각공간의 특성을 분석하였다. 연구결과는 다음과 같다. 1) 아파트 공간은 생활의 편리함과 용도의 명확한 구분 때문인지 공간이 세분화된 반면에 전통한옥 평면은 각 실이 다양한 용도로 사용함에 따라 아파트보다 각 실의 공간이 세분되지 않았다. 2)한옥평면도에서 대청이 거실로 변화하였을 뿐 두 평면도 모두 시대의 변화에도 불구하고 거실공간이 통합도가 가장 높았다. 3)한옥공간은 서로 공간이 통하는 통합성 성격이 강하지만 현대화된 한옥표준설계도는 분격성 공간의 성격이 강한 것으로 분석되었다. 4)일반적인 생각과 달리 아파트에서 안방의 통합성이 높았고 한옥평면도에서는 침실과 안방은 분격성이 높았다. 5)한옥평면도에서는 옛날과 달리 툇마루의 기능이 많이 감소한 반면에 사랑방에 부속된 누마루가 분격성 공간으로 분류되었다. 아파트에서는 피난공간이 분격성이 가장 높은 것으로 분석되었다. 즉 한옥표준설계도는 현대의 생활에 적응하면서 변화되어 있었다.