• 제목/요약/키워드: Marine structural element

검색결과 182건 처리시간 0.027초

Mobile harbor: structural dynamic response of RORI crane to wave-induced rolling excitation

  • Cho, Jin-Rae;Han, Ki-Chul;Hwang, Soon-Wook;Cho, Choon-Soo;Lim, O-Kaung
    • Structural Engineering and Mechanics
    • /
    • 제43권5호
    • /
    • pp.679-690
    • /
    • 2012
  • A new concept sea-floating port called mobile harbor has been introduced, in order to resolve the limitation of current above-ground port facilities against the continuous growth of worldwide marine transportation. One of important subjects in the design of a mobile harbor is to secure the dynamic stability against wave-induced excitation, because a relatively large-scale heavy crane system installed at the top of mobile harbor should load/unload containers at sea under the sea state up to level 3. In this context, this paper addresses a two-step sequential analytical-numerical method for analyzing the structural dynamic response of the mobile harbor crane system to the wave-induced rolling excitation. The rigid ship motion of mobile harbor by wave is analytically solved, and the flexible dynamic response of the crane system by the rigid ship motion is analyzed by the finite element method. The hydrodynamic effect between sea water and mobile harbor is reflected by means of the added moment of inertia.

A study on the method vibration analysis of marine pump

  • BAE, Dong-Myung;QI, Da-long;CAO, Bo;GUO, Wei
    • 수산해양기술연구
    • /
    • 제51권3호
    • /
    • pp.279-284
    • /
    • 2015
  • Generally, there are many kinds of pumps used on a ship, which play an obbligato role to assist the ship's running. However, due to the pump's own motor, it becomes a main vibration resource that may cause serious problems in local. If the above situation happened, it may cause local resonance even structural damage. Also, the bigger the pump's size is, the more serious the vibration is. Therefore, it is very important for researchers to estimate the vibrations situation of pumps accurately and avoid or reduce the probability of resonance. Based on a real marine pump-HHG8065, this paper did a vibration analysis by FEM (Finite Element Method) and compared the results with actual test. Finally, it gave a discussion on the estimation of pump and provided an improvement way to the vibration level.

Nonlinear self-induced vibration and operability envelope analysis of production strings in marine natural gas development

  • Liu, Kang;Chen, Guoming;Zhu, Gaogeng;Zhu, Jingyu
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제11권1호
    • /
    • pp.344-352
    • /
    • 2019
  • Marine production strings are continuously affected by unstable internal fluid during operation. In this paper, the structural governing equation for marine production string self-induced vibration is constructed. A finite element analysis model is established based on Euler-Bernoulli theory and solved by the Newmark method. Furthermore, based on reliability theory, a self-design procedure is developed to determine the operability envelope for marine production string self-induced vibration. Case studies show: the response frequency of the production strings is consistent with the excitation frequency under harmonic fluctuation and mainly determined by the first-order natural frequency under stochastic fluctuation. The operability envelope for marine production string self-induced vibration is a near symmetrical trapezium. With the increasing of natural gas output, the permissible fluctuation coefficient dramatically decreases. A reasonable centralizer spacing, increasing top tension, and controlling natural gas output are of great significance to the risk control in marine production string operation.

육상용 중속 디젤엔진 발전기세트의 진동 특성 및 저감 (Vibration characteristics and reduction of Diesel Power Plant(DPP))

  • 김원현;정건화;이수목;류영석
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2006년도 전기학술대회논문집
    • /
    • pp.39-40
    • /
    • 2006
  • Diesel power plant(DPP) with the medium speed diesel engine is operated under the very severe condition in aspect of load and operating time as compared with the marine diesel generator set. So, minimized vibration level have to be insured for the more stable operation of engine and generator. The vibration of generator set mainly comes from the resonance between the rigid modes by resilient mount or distortion modes by structural stiffness and the excitation forces of engine. Then, avoidance of resonance with structural modification is generally well known. In this paper, the first order vibration in non-resonance range and local vibration modes were investigated by impact test, response/ODS(operational deflection shape) measurement and 3D finite element analysis for the additional reduction of vibration. The proposed countermeasures were actually applied and their final effects were verified through the in-situ measurement.

  • PDF

Grillage Method Applied to the Planning of Ship Docking

  • Kim, Sung Chan;Ryu, Cheolho;Lee, Jang Hyun;Lee, Kyung Seok
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제2권3호
    • /
    • pp.150-157
    • /
    • 2016
  • When blocks are supported on a dock, huge reaction forces concentrated at the supports cause structural damage owing to local stress concentrations. Thus, the supports should be arranged to avoid local failure from the reaction forces by redistributing those forces. Docking analyses to determine the proper blocks and their support arrangements are introduced so that the local stresses are minimized to warrant the safety of the docking supports. Local stresses enforced by the support arrangement should be evaluated by finite element analysis (FEA). However, it is difficult to consider an accurate 3D geometry of the blocks in the finite element model because the structural design information is too complicated to determine within several days using the FEA model. This paper presents a simplified FE model to evaluate the safety of the arrangement of supports using a simplified grillage element. The grillage element can be efficiently used to obrain the reaction forces in docking analysis becasuse the reaction forces at the supports are enough to assess the safety of block. Since a simplified grillage model of the entire ship cannot accurately calculate the local stresses, an optimized modeling method based on the grillage element was introduced. The local reaction forces obtained by the proposed approach and three-dimensional FEA were discussed for typical types of ships. It is shown that the reaction forces obtained by the present grillage model are in reasonably good agreement with the FEA model.

p-version 무한요소를 적용한 지반-구조물 상호작용해석의 계산속도 향상 (A Speed-Up in Computing Time for SSI Analysis by p-version Infinite Elements)

  • 임재성;손일민;김재민;서춘교
    • 한국전산구조공학회논문집
    • /
    • 제29권5호
    • /
    • pp.471-482
    • /
    • 2016
  • 이 연구에서는 p-version 동적무한요소법을 도입함으로써 FE-IE 기법에 기반한 KIESSI-3D 프로그램의 속도향상에 역점을 두었다. KIESSI-3D의 성능을 평가하기 위해 8가지 실규모 SSI 문제에 대한 수치해석을 수행하였다. 이를 위해 근역지반 모델의 반경($r_0$)이 구조물기초 반경(R)의 1.2배, 1.5배, 3.0배인 KIESSI-3D 해석모델을 고려하였다. 또한 SASSI2010 프로그램을 이용한 SSI 해석을 수행하였으며, 이 결과를 KIESI-3D에 의한 결과와 정확성 및 계산속도를 비교하였다. 수치해석 결과, 인 KIESI-3D 모델을 사용하면 정확한 해석을 수행할 수 있음을 알 수 있었다. 계산속도 측면을 보면, 새로운 KIESSI-3D의 해석속도는 기존 KIESSI-3D에 비해 최대 25배 빠른 것으로 나타났다.

파랑 및 부유체 운동을 고려한 세장해양구조물의 동적 거동 해석 (Dynamic Response Analysis of Slender Marine Structures under Vessel Motion and Regular Waves)

  • Chung Son Ryu;Michael Isaacson
    • 한국해안해양공학회지
    • /
    • 제10권2호
    • /
    • pp.64-72
    • /
    • 1998
  • 해저자원개발에 사용되는 riser나 TLP의 인장각과 같은 세장해양구조물의 파랑 및 상단부유체의 운동에 대한 동적거동해석을 수행하였다. 구조부재의 유한요소모델을 사용한 수치해석기법을 개발하고 규칙파에 대한 시간영역해석을 수행하였다. 본 연구는 상단부유체의 수평 및 수직운동이 구조물의 횡방향거동에 미치는 영향을 분석하였으며, 특히 부유체 수직운동의 영향을 주로하여 패러미터연구를 수행하였다. 수심, 파랑조건 그리고 부유체운동 등 여러경우에 대한 구조물의 변의, 휨응력을 비교검토하였고, 이 해석을 통하여 부유체의 수직운동에 의한 시간변화 인장력으로 야기되는 불안정조건을 검토하였다. 예제해석결과, 부유체의 수평 및 수직운동의 상호작용으로 riser의 동적응답이 증폭되었다. TLP 인장각의 경우 부유체의 수직운동효과가 구조물의 거동에 상당히 크게 작용하는 것으로 나타났다.

  • PDF

간이 해석 기법을 이용한 FPSO 충돌 해석 (FPSO Collision Analysis Using a Simplified Analytical Technique)

  • 한상민;이토히사시
    • 한국해양공학회지
    • /
    • 제24권2호
    • /
    • pp.25-33
    • /
    • 2010
  • Collision between vessels may lead to structural damage and penetration of hulls. The structural damage of a hull may eventually bring about global collapse of the hull girder and outflow of oil, which would contaminate seawater. Therefore, various regulations require the strength of a vessel after collision to satisfy given criteria, and owners usually request collision analyses to confirm the structural safety of their vessels. In the process of designing a vessel to satisfy the collision strength criteria, the strength has been assessed mostly by conducting collision analyses using numerical techniques, such as dynamic, non-linear, finite-element analysis. Design is an inherently iterative process during which many changes are necessary due to the endless needs for reinforcement and modification. Numerical techniques are not adequate for coping with a situation in which collision analysis is frequently required to provide the revised results that reflect the repetitive changes in designs. Numerical techniques require a lot of time and money to conduct in spite of recent improvements in computing power and in the productivity of modeling tools. Therefore, in this paper, an analytical technique is introduced and a collision problem is idealized and simplified using reasonable assumptions based on appropriate background. The technique was applied to an example of an actual FPSO and verified by comparing the results with results from the numerical technique. A good correlation was apparent between the results of the analytical and numerical techniques.

부유식 진자형 파력발전장치의 연결부 최종강도해석 (Ultimate Strength Analysis of Connections of Floating Pendulum Wave Energy Converter)

  • 손정민;천호정;신승호;홍기용
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제17권1호
    • /
    • pp.36-41
    • /
    • 2014
  • 부유식 해양구조물은 설계수명동안 파랑에 의한 압축력, 굽힘하중, 전단력 등의 작용으로 인해 좌굴이 발생할 가능성이 높다. 이는 부재의 면내 강성 저하를 유발하여 국부 구조물 뿐만 아니라 전체구조의 최종강도에도 영향을 미치게 된다. 본 연구에서는 부유식 진자형 파력발전장치의 수실부와 감쇠판을 연결하는 원통부재의 최종강도에 대해 조사하였다. 탄성좌굴해석을 통해 얻어진 1차 좌굴모드를 초기처짐으로 가정하여 탄소성대변형해석을 수행하였으며 최종강도 특성을 바탕으로 부유식 파력발전장치의 연결부인 원통부재의 최적설계인자를 도출하였다. 이를 통해, 원통부재의 직경을 크게하거나, 판의 두께를 두껍게 하는 방법과 보강재를 사용하여 단면적을 크게하는 것이 최종강도를 증가시킬 수 있음을 확인하였다.

Comparison of hot spot stress evaluation methods for welded structures

  • Seo, Jung-Kwan;Kim, Myung-Hyun;Shin, Sang-Beom;Han, Myung-Soo;Park, June-Soo;Mahendr, Mahen;Lee, Jae-Myung
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제2권4호
    • /
    • pp.200-210
    • /
    • 2010
  • In this paper, different evaluation methods of Hot Spot Stresses (HSS) have been applied to four different welded structure details in order to compare them and to illustrate their differences. The HSSs at failure-critical locations were calculated by means of a series of finite element analyses. There was good overall agreement between calculated and experimentally determined HSS on the critical locations. While different methods and procedures exist for the computation of the structural hot-spot stress at welded joints, the recommendations within the International Institute of Welding (IIW) guideline concerning the 'Hot Spot Stress' approach were found to give good reference stress approximations for fatigue-loaded welded joints. This paper recommends and suggests an appropriate finite element modeling and hot spot stress evaluation technique based on round-robin stress analyses and experimental results of several welded structure details.