• 제목/요약/키워드: Marine structural element

검색결과 183건 처리시간 0.023초

GEOTECHNICAL DESIGNS OF THE SHIP IMPACT PROTECTION SYSTEM FOR INCHEON BRIDGE

  • Choi, Sung-Min;Oh, Seung-Tak;Park, Sang-Il;Kim, Sung-Hwan
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회 3차
    • /
    • pp.72-77
    • /
    • 2010
  • The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

  • PDF

광섬유 브래그 격자 다중화 센서 패키징 기술에 관한 연구 (Packaging Technology for the Optical Fiber Bragg Grating Multiplexed Sensors)

  • 이상매
    • 마이크로전자및패키징학회지
    • /
    • 제24권4호
    • /
    • pp.23-29
    • /
    • 2017
  • 본 연구에서는 선박이송용 트레슬의 표면에 부착할 수 있는 광섬유센서 패키지를 설계하고 파장다중분할방식에 기초한 센서 네트워크를 설계한 후, 모의 트레슬 유닛을 이용한 실험을 통하여 트레슬의 구조적 건전 모니터링을 위한 스마트 트레슬의 가능성을 확인하였다. 광섬유 브래그 격자 센서는 알루미늄 관으로 만들어진 원통형으로 패키징 되었다. 또한, 패키징 된 광섬유 센서를 폴리머 튜브에 삽입 한 후, 튜브 내부에 에폭시를 충전하여 센서가 해수에 대한 부식저항과 내구성을 갖도록 하였다. 패키지 된 광섬유 센서는 0.2 MPa 하의 수압테스트를 통하여 해수에서의 사용에 대한 신뢰성도 검증되었다. 트레슬의 변형에 관한 유한 요소 해석에 의해 얻어진 트레슬 부재의 변위가 큰 곳을 중심으로 트레슬에 부착할 브래그 격자의 수와 위치를 결정하였다. 최대 하중이 가해지는 트레슬 부재의 변형은 ${\sim}1000{\mu}{\varepsilon}$의 변형율로 분석되었으며, 그 때 트레슬에 걸리는 최대 하중으로 인한 센서의 브래그 파장 변화는 ~1,200 pm으로 계산되었다. 유한 요소 해석에서 얻은 결과에 따라 센서의 브래그 파장 간격을 3~5 nm로 결정하여 트레슬에 하중이 가해 졌을 때 센서 사이의 브래그 격자 파장값이 겹치지 않도록 설계하였다. 5개의 광섬유센서 패키지로 구성된 센서 모듈 5개를 연결하면 브래그 격자 센서 50개가 네트워크 될 수 있으므로, 브래그 격자 파장 검출기의 광원 중심 파장이 1550 nm에서 150 nm 광학 창 내에서 모두 검출될 수 있도록 하였다. 모의 트레슬 유닛에 부착 된 5개의 광섬유 센서 패키지의 브래그 파장 이동은 광섬유 루프미러를 사용하는 브래그 격자 파장검출기에 의해 잘 검출되었으며, 그 때 검출된 브래그 격자 센서의 값은 최대 변형률이 약 $235.650{\mu}{\varepsilon}$로 측정되었다. 센서 패키징과 네트워킹의 모델링 결과는 실험 결과와 서로 잘 일치하였다.

계류식 돌핀구조물에 대한 지반-말뚝계의 비선형 지반반력 해석 (Nonlinear Subgrade Reaction Analysis of the Soil-Pile System for Mooring Dolphin Structures)

  • 오세붕;이진학;이상순;김동수;정태영
    • 한국지반공학회논문집
    • /
    • 제15권2호
    • /
    • pp.3-16
    • /
    • 1999
  • 현재 국내에서는 부유식 구조물을 이용하여 소각로 및 담수화 공장을 해상에 축조하는 BMP(Barge Mounted Plant) 시스템에 관한 연구를 수행중에 있다(한국기계연구원 1997). 본 논문에서는 이러한 BMP의 계류 돌핀(mooring dolphin) 구조물하부의 말뚝기초의 거동을 모델하는 기법에 관하여 다루었다. 지반-말뚝계의 축하중 및 횡하중에 대한 거동은 지반을 비선형 스프링으로 모델하고 말뚝을 일축부재 및 보로 모델하여 유한차분적으로 해를 구하는 비선형 지반반력해석을 수행한다. 이러한 말뚝두부에서의 하중-변위관계로부터 지반-말뚝계의 등가강성을 산정할 수 있다. 따라서 본 연구에서는 거제도 주변 해역을 대상으로 지반조사를 수행하였고 이를 토대로 지반의 깊이에 따른 축방향 및 횡방향 하중전이 관계를 도출하였다. 그리고 돌핀하부의 말뚝에 대하여 축하중 및 횡하중에 대한 지반반력해석을 수행하였다. 이러한 해석과정을 통하여 대상지역에 적합한 말뚝의 관입깊이 및 단면을 합리적으로 산정할 수 있었다. 결국 말뚝두부에서의 하중-변위관계로부터 지반-말뚝계의 강성을 모델함으로써, 지반조건을 고려하여 돌핀구조물의 동적해석을 합리적으로 수행할 수 있었다. 해석결과 지반-말뚝계의 강성을 고려할 경우에는 강체로 고려한 경우에 비하여 변위 진폭이 상당히 크게 나타났다. 그리고 돌핀의 케이싱 상부의 모멘트가 더 크게 나타나고 해저지표 말뚝두부에 전달되는 모멘트는 더 작게 나타남을 알 수 있었다.

  • PDF