• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.580-588
• /
• 2006

Two-dimensional turbulent flows past a square cylinder and cavity noise are simulated by the finite difference lattice Boltzmann method with subgrid turbulence model. The method, based on the standard Smagorinsky subgrid model and a single-time relaxation lattice Boltzmann method, incorporates the advantages of FDLBM for handling arbitrary boundaries. The results are compared with those by the experiments carried out by Noda & Nakayama and Lyn et al. Numerical results agree with the experimental ones. Besides, 2D computation of the cavity noise generated by flow over a cavity at a Mach number of 0.1 and a Reynolds number based on cavity depth of 5000 is calculated. The computation result is well presented a understanding of the physical phenomenon of tonal noise occurred primarily by well-jet shear layer and vortex shedding and an aeroacoustic feedback loop.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.130-132
• /
• 2012

In this paper, a temperature control for LED(Light Emitting Diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan with various size of heat sinks was performed. To minimize the fan sound noise, optimal size of the heat sink was studied. Also, a teleoperting control of LED lamps using RF communication was studied.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.120-128
• /
• 2011

This paper presents an efficient method to analyze noise and vibration of marine diesel engines mounted on flexible hull structure. The analysis model should in general include the hull structure, leading to lots of computational efforts. To minimize the computational efforts, in this paper, the transfer synthesis utilizing the receptance at the mounting points is proposed. The procedure is then verified by comparing the results with those from the full model calculation. The effects of flexible hull structure on the acoustic power from engine block are finally investigated. It is found that the effect of the hull is significant when the receptance of hull structure is similar to or greater than that of mount or engine block.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.149-149
• /
• 2017

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.165-166
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.234-235
• /
• 2014

• 소음진동
• /
• 제6권4호
• /
• pp.503-511
• /
• 1996

There is a tendency of using the resilient mounting system to control the structure born noise transimitted from a engine of which weight is comparatively light and of which speed is comparatively high. According to recent reports, the resilient mounting system is applied to control the vibration of a engine running up to 300 - 400 R.P.M.. Furthermore, the resilient system is also used to the ships such as marine exploring ships, fishing boats, and military vessels. It is not desirous to apply the results for the resilient mounting systems of automobile engines to the controls of the vibrations of marine engines. Marine engines are worked under the idle speed in port and are operated up to the maximum contineous revolution at sea(running up condition). And marine engines are usually worked in inevitable conditions such as a misfire and a cut-off cylinder operating condition. Concerning the above running conditions, a resilient mounting system should be designed in the case of marine engines. In this paper, we studied the effect of engine's misfire on the resilient mounting systems. And the influences of design parameters, such as dynamic characteristics and fitting angles of resilient rubber mountings, were also investigated respectively on the single and double resilient mounting systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.449-453
• /
• 2014

• 해양환경안전학회지
• /
• 제12권3호
• /
• pp.193-199
• /
• 2006

선박에서 선내 소음이 문제로 인식되기 시작한 시기는 1970년대 초반 유럽에서 선박소음규제를 명문화하기 시작하였다. 이후 1982년 국제해사기구(IMO)에서 "International Code on Noise Levels on Board Ships"가 채택되어 오늘날에는 거의 모든 신조 선박에 대하여 해당하는 조항의 적용이 명문화되었다. 특히, 대형의 디젤기관과 다수의 보조기계가 동시에 운전되어지는 기관실 내부는 크고 복잡한 소음이 발생하는 환경으로 되어지고, 이러한 환경에서 작업하는 작업자는 소음성난청으로 되기 쉽다. 최근에는 각 나라별로 직업상의 난청으로부터 작업자를 보호할 목적으로 허용소음 폭로 시간을 법적으로 규제하고 있다. 우리나라에서는 근로기준법에서 정의하고 있지만 선박의 기관실과같이 특수한 조건에 대해서 국제해사기구의 규정에 따르고 있다. 본 논문에서는 국내 서남 연안을 정기적으로 운항하고 있는 화객선에 대한 소음의 정도를 조사하였다

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1078-1084
• /
• 2011

본 연구는 팬을 이용한 LED의 온도제어에 대한 것으로 팬에서 발생하는 소음을 최소화하기 위하여 최저소음 때의 풍량을 사용하여 LED의 온도제어에 대한 연구를 행하였다. 또한, LED의 소음 최소화 및 온도제어를 위하여 최저소음 때의 풍량을 이용한 팬의 순차제어에 대해 연구하였다. 제안한 연구를 위해 팬의 최저소음과 연관된 LED의 온도를 측정하고 이 결과들을 이용하여 팬을 이용한 LED 등의 온도 제어실험을 행하였다.