• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.116-126
• /
• 2008

In gas hydrate survey, seismic amplitude and frequency characteristics play a very important role in determining whether gas hydrate exists. According to the variation of source frequency and scatterer size, we study seismic amplitude characteristics using elastic modeling applied at staggered grids. Generally speaking, scattering occurs in proportion to the square of source frequency and the scatterer volume, which has an effect on seismic amplitude. The higher source frequency is, the more scattering occurs in gas hydrate bearing zone. Therefore, BSR is hardly observed in high frequencies. On the other side, amplitude blanking zone and BSR is clearly observed in lower frequencies although the resolution is poor as a whole. Seismic reflections traveling through free-gas layer below gas hydrate bearing zone decay so severely a high frequency component that a low frequency term is dominant. Amplitude anomaly of BSR result from high acoustic impedance contrast due to free-gas, which is a very crucial factor to estimate gas hydrate bearing zone. Seismic frequency analysis is carried out using wavelet transform method that frequency component could be decomposed with time variation. In application of wavelet transform to the seismic physical experiments data, we can observe that reflections traveling through air layer, which corresponds to the free-gas layer, decay a high frequency component.

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.71-85
• /
• 2014

To study biogeochemical characteristics and origin organic matter, sediment samples were taken from Site of 1249C and Stie 1251B of ODP Leg 204. Data of Rock-Eval, isotope, and element analysis generally indicate dominance of marine organic matter in sediments deposited under marine sedimentary environment. Only Rock-Eval data are somewhat different from those of others owing to under-maturation of organic matter. Samples of Site 1249C show high content of gas hydrate, whereas Site 1251B low content of gas hydrate in some intervals of the core. This result may be accounted to different location of two cores and presence of transportation passage (Horizon A, BSR 2) of thermogenic gas in the core, 1249 C. However, Site 1251B Located in the basin of low accumulation of gas hydrate is presumed to be limited in the gas hydrate production. Because not only transportation passage is limited to move thermogenic gas from the core, but also gas supply was not enough. Therefore, the biogenic gas that resulted from diagenesis of there sediment is superior.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.137-148
• /
• 2022

In this study, ship movement simulation was performed based on a marine physics model for the ancient port presumed under the past environmental conditions in the coastal area of Hwaseong, which played an important role as a center of trade in the Three Kingdoms and Unified Silla periods. The paleo topographical surface was reconstructed through the analysis of borehole sediments, and the paleo coastline was extracted through the geomorphological maps published during before independence. Based on the established paleo environmental conditions of the Hwaseong coast, the marine physics model (FVCOM) was used to simulate the flow of surface currents and the route of floating materials assumed to be ancient ships. As a result, the processes of moving ships from the port to the open sea in the Eunsupo area, which is estimated location of the ancient port related to Dangseong, was well simulated, and thus the reliability of the location of the ancient port estimated by the scientific method was secured. This study is significant as a result of convergence research that encompasses archeology, history, geomorpology, geology, and oceanography.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.397-406
• /
• 2012

During the 2nd Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) in 2010, gas-hydrate-bearing sediment cores were recovered at 10 drill sites. Base, on Infrared (IR) thermal image and grain-size analysis of the cores, three distinct types of gas hydrate are classified: Type I (fracture-filling in mud layers), Type II (disseminated in mud layers), and Type III (pore-filling in sand layers). Types I and II gas hydrates occur in mud as discrete veins, nodules or disseminated particles. Type III fills the pore spaces of the sand layers encased in mud layers. In this case, the sand content of hosting sediments shows a general linear relationship with gas hydrate saturation. The degrees of temperature anomalies (${\Delta}T$) from IR images generally increase with gas hydrate saturation regardless of gas hydrate occurrence types. Type I is dominantly found in the sites where seismic profiles delineate chimney structures, whereas Type II where the drill cores are composed almost of mud layers. Type III was mainly recovered from the sites where hemipelagic muds are frequently intercalated with turbidite sand layers. Our results indicate that gas hydrate occurrence is closely related to sedimentological characteristic of gas hydrate-bearing sediments, that is, grain size distribution.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.409-425
• /
• 2019

Marine terraces, a step-like landform, are important geologic markers that provide tectonic information during the Quaternary Period. Marine terraces are well developed along all coastlines(East, West, and South) of the Korean Peninsula, those along the East coastline are the most distinctive. The marine terraces of the East coastline are classified into 4-6 flights that are several meters or several tens of meters above the present sea level. It is believed that these terraces, except for the lowest one, were formed in the middle Pleistocene. In the base of the OSL age dating results and Blake excursion events of magnetostratigraphy, the $2^{nd}$ and $3^{rd}$ terraces are correlated to the last interglacial stage. Considering the marine terraces linked to a sea-level curve of the Pleistocene, it is thought that regional tectonic movements have uplifted the East coastal area since the middle Pleistocene. Besides, former shorelines of each terrace have varied elevations from Gangreung to Busan bay, which can be divided into four regions, namely, Gangreung-Yonghanri(I), Homikot-Najung(II), Najung-Bangeojin(III), and Waesung-Busan Bay(IV). The former shorelines of each terrace at both Gangreung-Yonghanri(I) and Najung-Bangeojin(III) are higher than those in the other two regions, due to block movements by regional faults such as the Ocheon Fault or its subsidiaries, the Gampo Lineament and Ulsan Fault. Uplift rate of the East coast ranges from 0.2 m/ky to 0.3 m/ky, but each region shows different uplift rate.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.417-426
• /
• 2006

Data acquisition is as important as data processing and interpretation in the field of marine geophysical exploration. Marine geophysicist, however, may not have enough information in this field because data acquisition method has been mainly developed by the commercial companies manufacturing the equipment. Therefore, the purpose of this paper is to introduce the general data acquisition method and information to help to construct the systematic and effective survey plan. When a survey plan is set up, the most important thing is to select the seismic equipment based on required penetration depth and resolution, and then construct the survey line intervals. Although a line interval varies from the research purposes, it should be narrower than the expected subsurface structures. Also, if 100% coverage of multibeam data is required, line intervals need to be adjusted based on the equipment characteristics. In case of merging with the preexisting dataset like bathymetry, gravity and magnetic, cross-over errors occurred at the each cross point should be removed to avoid any kinds of misinterpretation.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.219-223
• /
• 2008

Many cross-over errors due to position errors, meter errors, observation errors, sea conditions and so on occur when marine geophysical data collected by own and other agencies are merged, and these errors can create artificial anomalies which cause an improper interpretation. Many methods have been introduced to reduce cross-over errors. However, most methods are designed to compare each point or segment data to find cross-over points, and require a long processing time. Therefore, FORTRAN program (FastXcorr) is presented to fast determine cross-over points using an overlap-sector, and to adjust cross-over errors using a weighted linear interpolation algorithm.

• The Korean Journal of Petroleum Geology
• /
• v.10 no.1_2 s.11
• /
• pp.1-9
• /
• 2004

A total of 17 exploratory wells were drilled from the Block VI-1 and recently commercial gas field was discovered in the Ulleung Basin. Thermal maturity of organic matter in the sediments from the drilling wells were evaluated for the characterization of the petroleum system of the basin. Level of thermal maturation of organic matter is different depending on the area to area. The top of oil window is located at about 800 m in the Dolgorae 5 area, and it is relatively deeper in both western and northern areas. It seems that thermal maturity of organic matter reached present stage before tectonism in the deformed zone 2, whereas thermal maturation continued after tectonism in other zones.

• Proceedings of the KSEEG Conference
• /
• 2005.04a
• /
• pp.367-369
• /
• 2005

• Economic and Environmental Geology
• /
• v.11 no.2
• /
• pp.81-88
• /
• 1978

Nearly 300 bottom sediments and 20 box-cores were sampled from the Asan bay. The central portion of the Asan bay is covered by sand, slightly gravelly sand and gravelly muddy sand. Between the central and marginal zones gravelly mud and slightly gravelly sandy mud are characteristically distributed. The gravel population in the sediments seems to be originated from the rocky bottom on the area near the bay because the gravel is angular and composed of the schist and gneiss. The quartz/feldspar ratio is about 3/2. It is considered to be that the amount of feldspar in this bay is much higher than that of any other areas in the Yellow Sea. This is considerd to be comparatively short distance of transport ion of these sediment from the provenance.