• Journal of Advanced Marine Engineering and Technology
• /
• 제37권2호
• /
• pp.236-241
• /
• 2013

처음 승선한 실습 기관사가 선박 기기에 대한 다양한 경험을 쌓고 비상시에 대비할 수 있을 정도의 수준에 도달하려면 긴 시일과 많은 비용이 든다. 따라서 현장과 유사한 환경에서 짧은 시간내 체계적인 교육과 훈련을 통해 다양한 경험과 비상시 적절한 판단을 가능케 하도록 STCW-95 권고안을 따르는 여러 형태의 시뮬레이터가 개발되어 교육 훈련 도구로써 활용되고 있다. 현재 국내에서 운용되고 있는 기관시뮬레이터는 전량 외국에서 도입된 것으로서 국제협약의 개정이나 기술발전사항 등을 바로 반영하기 힘든 상황이다. 본 연구에서는 실습기관사가 보조 보일러, 배기 보일러 및 증기터빈과 같은 증기계통의 각종 장치간의 연관성을 쉽게 파악할 수 있도록 하는 선박용 보조 보일러 시뮬레이터 개발에 대하여 논한다.

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.746-756
• /
• 2017

Marine accidents of fishing vessels occupied about 70.5% of the whole marine accidents in Korea from 1996 to 2015, this ratio was not much changed for a long time. A lot of efforts have been taken recently but marine accidents do not reduce. Therefore a fundamental counterplan to decrease accidents in fishing vessel is indispensable for reduction of whole marine accidents in Korea. Since the most frequent occurring accidents in fishing vessels were engine trouble and collision in statistics by KMST (1996~2015), the study focused on them. The cause of engine trouble were poor inspection and maintenance of the mechanical system. The greatest portion of marine accidents was collision, and the biggest cause of the collision was poor watch-keeping. The better watch-keeping will be the best way to reduce the accident. For this reason, it may be necessary for the navigator to make strict precaution on the other vessels under way systematically and keep the regulation for preventing collisions, and for an engineer on watch to make a check the mechanical system periodically for reduction the engine trouble. Instead of penalty, incentive about safe navigation will be helpful for reduce accident as if automobile insurance would do. In order to prevent engine trouble, the fisheries federation establish the repair center. Futhermore the development of autonomous navigation system is necessary to reduce the marine accident.

• 기술사
• /
• 제41권5호
• /
• pp.41-44
• /
• 2008

해상을 운항하는 선박들은 충돌, 좌초, 침몰, 전복 및 조난 등의 위험에 노출되어 있으므로항행 중에 발생할 수 있는 여러 가지 해양사고의 요인을 살펴보고 방지 대책을 생각해 보았다. 일단 해상에서 사고가 발생할 경우 신속하고 효율적인 구조를 위해 유관기관 사이에 일원화된 지휘체계가 필요하다. 또한 해양사고의예방을 위해서는 선원들에 대한 안전교육을 강화하고 안전한 항행을 위한 항행여건을 개선하는 것이 중요하다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.34-35
• /
• 2017

Under the STCW Convention, marine engineers are required to have a satisfactory level of maritime English proficiency so that they can successfully perform their duties on board or maintain and operate the various equipment and facilities installed in the ship. More specifically, the importance of the engineers' written communication skills has been highlighted since their documents (for instance, post-work records, legal, and/or internal reports) have a significant legal impact in the event of a marine casualty or maritime crime. To suggest the necessity of developing standard engineering logbook phrases (SELP), therefore, this paper will closely analyse three-month authentic marine engineers' work records written by Korean officers. From the analysis, the problems and errors in the logbook will be analysed, and considerations to be taken into account in the development of SELP will be illustrated. Finally, the future actions for this standardised written communication for the logbook entry will be sought.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.57-67
• /
• 2008

Recently, Korean shipbuilding industry is keeping up the position of world wide No. 1 in world shipbuilding market share. It is caused by endless efforts to develope new technologies and methods and fast development of IT technologies in Korea, to raise up its productivities and efficiency in shipbuilding industry with many kinds of optimizing methods including genetic algorithm or artificial life algorithm... etc. In this paper, we have suggested the artificial life algorithm with relay search micro genetic algorithm. and we have improved a defect of simple genetic algorithm for its slow convergence speed and added a variety of solution candidates with applying relay search simple genetic algorithm. Finally, we have developed intelligent agent system for ship CAE modeling. We have tried to offer some conveniences a ship engineer for repeated ship CAE modeling by changing ship design repeatedly and to increase its accuracy of a ship model with it.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.252-261
• /
• 2014

Marine casualties originated from fishing vessel occupied about 70% of the whole marine casualties in Korea from 2001 to 2010, this ratio was not much changed as it was before. Therefore a pragmatic counterplan to decrease of casualties in fishing vessel is indispensable for reduction of the nationwide marine casualties. But since the casualties occurred by fishing vessel may have a different causes and counterplan according to the operating type of it, in this paper, fishing vessels classified into 12 types by operating method and inspected the causes and counterplan for that. The operating type of fishing vessel occurred the specific casualties more were jig boat in collisions and fire explosion, trap fishing boat, mixed fishing boats and inshore gill netter in collisions, stow netter in machinery damages and capsizing, offshore gill netter in machinery damages, fish carrier in collisions. It must be emphasized that the higher ranked types of vessels, especially jig boat have to take special care to the approaching vessels under way, trap fishing boat to rear look out and mixed fishing boat must keep on safety speed and be taken an education for advance the skill of operating radar as well. For all 12 types of fishing vessel, it is necessary for an operator to make strict precaution on the other vessel under way systematically and keep the regulation for preventing collisions, and for an engineer on watch to make a check the electricity and the engines periodically for reduction the fire explosion and machinery damages.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.171-171
• /
• 2018

• 기술사
• /
• 제12권3호
• /
• pp.18-22
• /
• 1979

"In summary, the freezing facilitty manufacturing industry has a bright prospects for further development. So followings are recommended: 1) The import restriction policy should be continued to expand the demand for the 10callT manufactured facilities, 2) Training of local people and import of advanced technologies should be encouraged 3) The capacities of the local manufacturing industry should be expanded to meet the: increasing demand for the facilities, 4) Further incentives should be affered to the freezing & cold storage sector for the repla¬cement of the worm-out facilities 5) The marketing channel of marine products should be reorganized into ""cold-chain system"" by providing a legislative supports."

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1195-1202
• /
• 2001

The flow characteristics in a bifurcated duct are investigated experimentally. Physical properties such as mean velocity vectors, mean x-y stress distributions, mean vorticity and total pressure distributions are Obtained for three different Reynolds numbers(578, 620, 688) Using PIV measurements and CFD analysis. Also, three different rates of discharge Q=26.11 l/min, Q=28.11 $\ell$/min, Q=31.17 $\ell$/min) were selected foy experimental conditions. The results of this study would be useful to the engineer in designing the flow systems for heating, ventilation, air conditioning and wastewater purification plants.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.42-48
• /
• 2003

In general many engineers can diagnose the fault condition using the abnormal ones among data monitored from a diesel engine, but they don't need the system modelling or identification for the work. They check the abnormal data and the relationship and then catch the fault condition of the engine. This paper proposes the construction of a fault diagnosis engine through malfunction data gained from the data fault detection system of neural networks for diesel generator engine, and the rule inference method to induce the rule for fuzzy inference from the malfunction data of diesel engine like a site engineer with a fuzzy system. The proposed fault diagnosis system is constructed in the sense of the Malfunction Diagnosis Engine(MDE) and Hierarchy of Malfunction Hypotheses(HMH). The system is concerned with the rule reduction method of knowledge base for related data among the various interactive data.