• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.557-560
• /
• 2003

Some well-known artificial weathering tests such as freezing-thawing, acid immersion, and salt crystallization are adopted to examine the change of rock properties during the processes of artificial weathering. Granites and other rock types of limestone, marble and basalt collected from different quarries in south Korea were sampled for this study. All tests were performed up to 30 cycles and physical properties were measured after experiencing every ten cycles of artificial weathering tests. During the tests, the variation trends of rock properties were too variable to draw generalized variation patterns but it can be concluded that weathering agents have different effect on rock properties depending on weathering circumstance and time. Even in short terms of salt crystallization tests, some rocks were severely deformed and then burst, and in the early stages of salt weathering, recrystallized salts filling pores and cracks in rocks could be a important factor affecting rock properties.

• Economic and Environmental Geology
• /
• v.18 no.3
• /
• pp.263-276
• /
• 1985

Building stones can be divided into two groups: raw stone and stone product. In Korea, they consist of granite, diorite, gabbro, andesite, tuff, slate and marble, of which granite is main product. The disribution area is approximately $31,753km^2$. The enterprises of building stone are about 1,500 at present. The granites for building stone are biotite granite, hornblende granite. granodiorite and porphyritic granite, of different colors (white, pink, grey, green and black). The compressive strength of granite ranges from 813 to $1,338kg/cm^2$, hardness from 78 to 101 and water absorption ratio from 0.09 to 0.40%. The weight reduction ratio of granite for 14 hours in aqua regia+$KMnO_4$solution is 0.3~4.5wt.%. There are eighty granite quarries in Korea. Marbles can also be extensively used for building but only a few mines are operated at present.

• Electrical & Electronic Materials
• /
• v.13 no.12
• /
• pp.6-9
• /
• 2000

Over the years of decades, the memory technology has progressed a long, marble way. As we have evidenced from the Intel's 1Kb DRAM in 1970 to the Gigabit era of 2000's, the road further ahead towards the Terabit era will be unfolded. The technology once perceived inconceivable is in realization today, and similarly roadblocks as we know of today mayvecome trivial issues for tomorrow. For the inquiring mind, the question is how the "puzzle"of tomorrow's memory technology is pieced-in today. The process will take place both in evolutionary and revolutionary ways. Among these, note-worthy are the changes in DRAM architecture and the cell process technology. In this paper, some technical approaches will be discussed to bring these aspects into a general overview and a per-spective with possibilities for the new memory technology will be presented.presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.69
• /
• pp.65-73
• /
• 2001

The objective of this study is to evaluate the vibration attenuation effects of the different type of gloves and drilling mode while operating a light-weighted powered hand drill. For the experimental design, five different kinds of glove(barehanded cotton partly coated anti-vibration, and open-finger vibration glove) two types of push force level(100N and 200N) and two types of drilling mode(impact and non-impulsive) were considered. Six healthy male subjects were employed to drive screws into a vertically mounted marble plate with a powered hand drill in a randomly ordered experimental conditions. The findings of this study are summarized as follows; (1) It was found that the best combination of overall BMS transmissibility was using impact drilling mode with anti-vibration glove among evaluated experimental conditions (2) The wearing open finger vibration glove in mid-frequency level and anti-vibration glove with impact drill in high-frequency were the best in the result from mean corrected transmissibility equation of ISO 10819.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.17-20
• /
• 2000

Over the years of decades, the memory technology has progressed a long, marble way. As we have evidenced from the Intel’s 1Kb DRAM in 1970 to the Gigabit era of 2000’s, the road further ahead towards the Terabit era will be unfolded. The technology once perceived inconceivable is in realization today, and similarly roadblocks as we know of today may become trivial issues for tomorrow. For the inquiring mind, the question is how the “puzzle” of tomorrow’s memory technology is pieced-in today. The process will take place both in evolutionary and revolutionary ways. Among these, note-worthy are the changes in DRAM architecture and the cell process technology. In this paper, some technical approaches will be discussed to bring these aspects into a general overview and a perspective with possibilities for the new memory technology will be presented.

• Computers and Concrete
• /
• v.18 no.2
• /
• pp.201-214
• /
• 2016

In this paper, a multilaminate based model have been developed and presented to predict the strain hardening behavior of rock. In this multilaminate model, the stress-strain behavior of a material is obtained by integrating the mechanical response of an infinite number of predefined oriented planes passing through a material point. Essential features such as the variable deformations hypothesis and multilaminate model are discussed. The methodology to be discussed here is modeling of strains on the 13 laminates passing through a point in each loading step. Upon the presented methodology, more attention has been given to hardening in non-linear behaviour of rock in going from the peak to residual strengths. The predictions of the derived stress-strain model are compared to experimental results for marble, sandstone and dense Cambria sand. The comparisons demonstrate the ability of this model to reproduce accurately the mechanical behavior of rocks.

• 보존과학연구
• /
• s.7
• /
• pp.11-23
• /
• 1986

Korea has a long history from several thousand years ago. Specially stonecultural properties were used for the long period in Korea. Ancient tombs of prehistoric age, Sukgul-am (stone cave), Chumsung-dae (astronomical observatory)and stone statue of Buddha in the period of three dynasties were made of stone. There after the foundation stone, mortarstone, millstone, and other stone facilities at home have been also used for a long time. For the conservation of the cultural properties, the ecological distribution of lichens was investigated with the stone buildings around tombs and multistory stonepagodas.1. Yoo-nung (The tomb of Emperor Sungjong) : The stone buildings of granitearound tomb about 80 years old are clean and solid in quality, but they were covered in places with three kinds of lichens as the circle forms of pale-green and dark-gray colored thallus in crustose type. They were examined ecological distribution, identification and measurement of lobe size of lichens.2. Yoong-nung (The tomb of son of Emperor Yung-jong) : Granite buildings around tomb about 200 years old are also clean, moreover, they were also covered with the same kinds of crustose lichens in overlap.3. Yung-nung (The tomb of Emperor Sejong) : More than seven species of crustose, foliose and one species of fruticose lichens were growing on thegranite stone buildings built in about 500 years ago.4. Shilluk-sa multistory brick pagoda : It was built at the Koryo dynasty more than about 700 years. More than 5 species of crustose folios and two species of fruticose lichens were growing well on the granite stone at shade area. It was assumed that foliose lichens as dominant species with the respect of ecological aspect.5. Shilluk-sa multistory marble pagoda : This marble pagoda was built at the middle period of the Koryo dynasty as the same age of multistory brick pagoda. It was covered with black colored thallus such as crustose lichens. It is seemed that only crustose lichens on the stone were due to the drymarble stone. From the results described above, distribution of lichens showed that only crustose lichens on the stone from the short history (about 100-200 years) were grown with small size of circle form, stone buildings over 500 years were covered with crustose, folios and fruticose lichens, and the lichens distribution on the stonemore than 500 years appeared more foliose and fruticose than crustose type. Therefore, it is suggested that the succession of lichens on the stone buildings iscrustose$\rightarrow$foliose$\rightarrow$fruticose.Parmelia mexicana, Cladonia floerkeana, Ramalina yasudae identified are described in this paper and other unidentified species of saxicolous lichens will bedescribed later.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.45-49
• /
• 1972

The following are some results obtained from a series of experiments in rotifer culture and its usage for the food of tiny fish fry: 1, Outdoor concrete ponds, each being $16m^2$, were used to culture the rotifers, Brachionus calyciflorus, and Filinia longiseta. Brachionus calyciflorus usually attained the population of about 100 individuals per ml of pond water. Dipterex was usually applied to control Daphni,a and other crustaceans that generally appear and feed on rotifers. A concentration of 0.16 to 0.2 ppm in the pond water was sufficiently effective to control these natural enimies of rotifers. Poultry dung was very effectively used to multiplicate rotifers. The fertilization ratio was about 8 kg each pond with 30cm depth of water. 2. The tiny rotifer, Filinia longiseta attained a very high population density of about 1,000 individuals per ml of pond water, but they were very sensitive to dipterex, and for this aspect future investigation may be needed. 3. In the outdoor ponds, the multiplication of rotifers significantly decreased when the water temperature falls to about $20^{\circ}C$ in autumn. 4. In the laboratory room, unicellular planktonic algae such as Scenedesmus or Chlorella, as the food of rotifers, were collected from the outdoor ponds by dipping them together with water, and were effectively used for the culture of Brachionus calyciflorus. If the planktonic algae are cultured in specially designed containers, the sun-light would be the most effective means as the source of light. 5. Brachionus calyciflorus cultured in the outdoor ponds by the dipterex controlled method was highly efficient to rear the early fry of marble gourami. The dipterex content mixed in the water to control the crustacean emmies of rotifers sieved no harm to the gourami fish fry.

• Journal of Conservation Science
• /
• v.24
• /
• pp.1-11
• /
• 2008

The Unhyungung Water Container in the possession of the Seoul Museum of History in Korea is consisted of a calcareous marble developed laminated bedding and numerous argillaceous veinlets. This monument should need to conservation treatment because of black discoloration and seriously numerous cracks. Vertical and horizontal cracks in the monument are developed following stratification and argillaceous veinlets that are relatively low coherence between the rock materials. We have proved that the material inducing discoloration on the surface is carbon which is formed by deposited organic matters. As the result of the ultrasonic measurements, although highly surface weathering degree, the physical properties of the Unhyungung Water Container is confirmed slightly weathered state. The depths of cracks in the monument are calculated at maximum 60mm in some cracks completely penetrating into the wall and at minimum 9mm in the other crack. The cracks, developed following veinlet, are revealed that there penetrate from an outer wall to an inside wall for the monument. And most depths of cracks, developed following stratification, are calculated 20 to 30mm. This result will offer a significant data for conservation of the Unhyungung Water Container.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.199-206
• /
• 2013

The Daehyun gold-silver deposit consists of two hydrothermal quartz veins that fill NE-trending fractures in the Cambro-Ordovician calcitic marble. I have sampled wallrock, hydrothermaly-altered rock and gold-silver ore vein to study the element dispersion and element gain/loss during wallrock alteration. The hydrothermal alteration doesn't remarkably recognized at this deposit and consists of mainly calcite, dolomite, quartz and minor epidote. The ore minerals composed of arsenopyrite, pyrrhotite, pyrite, sphalerite, stannite, chalcopyrite, galena, electrum, native bismuth and silver-bearing mineral. Based on analyzed data, the chemical composition of wallrock consists of mainly $SiO_2$, CaO, $CO_2$ with amounts of $Al_2O_3$, $Fe_2O_3(T)$ and MgO. The contents of $SiO_2$, $Fe_2O_3(T)$, MgO, CaO and $CO_2$ vary significantly with distance from ore vein. The element dispersion doesn't remarkably recognized during wallrock alteration and only occurs near the ore vein margin because of physical and chemical properties of wallrock. Remarkable gain elements during wallrock alteration are $Fe_2O_3(T)$, total S, Ag, As, Bi, Cd, Cu, Ni, Pb, Sb, Sn, W and Zn. Remarkable loss elements are $SiO_2$, MnO, MgO, CaO. $CO_2$ and Sr. Therefore, Our result may be used when geochemical exploration carry out at deposits hosted calcitic marble in the Hwanggangri metallogenic district.