• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.29-33
• /
• 2017

This paper presents a development of vision aligner with three channels for the wafer and plate bonding machine in manufacturing of LED. The developed vision aligner consists of three cameras and performs wafer alignment of rotation and translation, flipped wafer detection, and UV Tape detection on the target wafer and plate. Normally the process step of wafer bonding is not defined by standards in semiconductor's manufacturing which steps are used depends on the wafer types so, a lot of processing steps has many unexpected problems by the workers and environment of manufacturing such as the above mentioned. For the mass production, the machine operation related to production time and worker's safety so the operation process should be operated at one time with considering of unexpected problem. The developed system solved the 4 kinds of unexpected problems and it will apply on the massproduction environment.

• Particle and aerosol research
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2010

Generally, large amounts of DOP(Di-Octyl Phthalate) chemicals are used as plasticizers in PVC compound manufacturing processes. However, it is very important to collect DOP species immediately from a workplace in order to protect worker's heath and recover them. To accomplish these objectives, we need to understand the droplet formation and growth mechanisms of DOP species. In this study, two important parameters such as temperature gradient and residence time were considered to clarify these mechanisms. We found that residence time is very critical to determine the droplet size distribution of DOP, whereas temperature gradient in general operating conditions(less than $-6.8^{\circ}C/cm$) is negligible.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.80-85
• /
• 2016

This study suggests a process design using cognitive processes. Job characteristic model for job design and recent cognitive engineering studies for process design are reviewed briefly. By using these concepts, the lean production system is re-interpreted in terms of cognitive engineering and the latent dimensions of the lean production system are revealed as the application of cognitive engineering principles. An integrated process design framework for cognitive manufacturing system using job characteristic model is suggested for the effective design of manufacturing system. Propositions for empirical analysis of this model are also analyzed through a questionnaire survey. Propositions are (1) experiential cognition and motivation potential affect the ability, role perception, and need for achievement of the operator in the manufacturing system, (2) the ability, role perception, and need for achievement of the operator affect the job performance. Both propositions are supported by correlation analysis and path analysis.

• Journal of Labour Economics
• /
• v.27 no.2
• /
• pp.29-66
• /
• 2004

In this paper, I investigate job creation and destruction in Korean mining and manufacturing between 1982 and 2000 using the raw data of Annual Mining and Manufacturing Survey. The rate of job creation and destruction of continuing plants averaged 9.75 and 10.33, respectively, which are higher than those of OECD countries, Chile, and Colombia. The created jobs showed weak persistence and the concentration of job reallocation is high, compared with other countries. Job reallocation accounts for major fraction of worker reallocation and the fraction has increased before 1997. Analysis of time series data of job flow revealed a general pattern of pro-cyclic job creation and counter-cyclic job destruction. However job reallocation in Korea is strongly acyclic whereas the rate is known to be counter-cyclical in the U.S.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.1
• /
• pp.37-46
• /
• 2000

In this paper, we developed a simulation model of a car parts assembly line to improve the system performance such as worker's utilization balancing, productivity. This simulation model has been developed using QUEST, a true 3D discrete event simulation pakcage that is designed for modeling and analysis of manufacturing systems. We have suggested the results obtained to improve the system performances of an existing production line.

• Journal of the Ergonomics Society of Korea
• /
• v.5 no.1
• /
• pp.43-48
• /
• 1986

This study aims to investigate the effect of biorhythm to work performance. In order to do this, the data are collected from the manufacturing factory which produce a sportware, and the statistical test are made to testify the relationship between the number of defective items and the biorhythm chart of the workers. The number of defective items which made in the peak day, usual day, and critical day on the worker's biorythm chart are compared with each other, and the statistical test are made to see if there are difference between them, and the correlation analysis are made to see if there is any correlation between the work performance and the biorhythm chart. The result of the statistical test shows that the biorythm of the worker gives an effect to his work performance with a correlation.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.79-89
• /
• 1992

Indicies of the labor productivity were assessed from 80 industry foodservice erstablishments in terms of meals served per labor hour, labor minutes per meal served, and labor cost per meal served. The labor productivity indicies were also assessed according to variables related to work such as working hours, paryment for the workers, volume of feeding, utilization of foodservice equipment, use of processed foods, and background of employees. The summary of the results was as follows: 1. Manufacturing sector among surveyed industry foodservice showed the highest labor productivity indicies followed by training institute. 2. 28.8% of surveyed establishments used dishwashing machine, while manual dishwashing was used in 71.3% of subjects, equipped rate point was 9.8 out of 20, and disposable dish was used in 30% of subjects. 3. A significant positive relationship was found between the number of meals and the labor procductivity indicies. As the number of meals increased, more meals were served per worker as per labor hour. 4. A significant negative relationship was found between price of meal and the labor productivity didicies. As the price of meal increased, less meals were served per worker as well as per labor hour.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.104-109
• /
• 2001

Nowadays, Industrial competition power is depended on that rapidly produce the customized products. Therefor, it is necessary to reduce period of product development. Thus, concurrent engineering that work many process at a time was appeared and Rapid prototyping was appeared, it is method that rapidly produce the prototype. If the graphic model was made by CAD, the prototype can be made in short term. That provide what the part was directly tested by the worker. It provide a worker with believable data. We study on the influence of surface roughness on injection interval and part angle at FDM.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.4
• /
• pp.203-208
• /
• 2009

Lacks of harmony of a person and machine according to productivity elevation pursuit is happened by enterprise common problem in Global competition age and productivity loss is caused being connected to worker's burden work. Burden work in PET bottle production Process which are arrangement, Packing, interior inspection is analyzed by Ergonomic analysis technique. REBA estimation point(10~11 points) means the high step of hazard on worker's burden. It is immediately required the improvement on the process. This thesis show you the improving methods like package, examination justice.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.24-27
• /
• 2006

International standards claim the best possible reliability in industrial manufacturing processes. This is also essential for the application with manual applicators. The application of adhesives with manual applicators is one of the most frequently used application techniques. The range of application reaches from the building of prototypes in the automobile industry over the use in single or small-batch manufacturing up to applications in crafts enterprises. Conventional manual applicators for adhesives and sealants don't fulfill the demands in international standards for the best possible reliability. Only the worker is able to control the quality and the quantity of the bond. A velocity-controlled manual applicator solves these restrictions. Special sensors and micro controllers calculate the flow-rate, the velocity and the location of the manual applicator. This leads to stable and repeatable application processes which are claimed in international standards. The location of the bond can be compared with the nominal value, so that it is possible to check the quality of the bond during application. Furthermore there is the potential to document the data of the manufacturing process.