• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.701-706
• /
• 1994

Holonic manufacturing system is a new approachto the organization and architecture of decentralized, autonomous and cooperative manufacturing system. The new paradigm combines the concepts of hierarchical systems and the integration of autonomous elements in distributed system. Today's scheduling and control techniques are mostly based on a centralized structure. Only little work has been done on scheduling and control of decentralized, autonomous and cooperative manufacturing system. This paper proposes a new approach IPM(Interactive Prediction Method) for scheduling and control of holonic manufacturing system.

• 산업경영시스템학회지
• /
• 제17권30호
• /
• pp.167-175
• /
• 1994

Generally, queueing networks, networks, chains and simulation techniques are among the most widely used evaluation tools to study computer systems, manufacturing systems etc. But, these tools have some assumptions and difficulties. So, this thesis presents a method for manufacturing system using Petri nets. Petri nets are a graphical and mathmatical modeling tool and are promising tool for describing and studying systems that are characterized as being concurrent asychronous, dynamic, distributed and parrallel. It designs Petri net model for processing time of manufacturing system And it applied to a job shop system composed of 8 machines and 4 different job types.

• 산업경영시스템학회지
• /
• 제21권46호
• /
• pp.103-118
• /
• 1998

This study closely examines quality management's realities which manufacturing firms have and effective result controls access formula by comparison and analysis on the product of introduction quality control realities and quality management of manufacturing firms in Chollabukdo. In order to accomplish the purpose of this study, this research was progressed as order of literature review and survey. After literature review this study drew up questionnaire on the basis of foregoing literature and executed survey on manufacturing business taking TQM(Total Quality Management) in Chollado's area. The result of analysis are as follows. First, according to the analysis manufacturing of industry's realities, investment in TQM techniques seems to contribute to the performance of manufacturing firms, but most of manufacturing firms quality control do not have strategic orientations. Conseqently, general and strategic quality management system suitable for the realities of manufacturing industry are required. Second, It seems that manufacturing industry didn't recognize strategic importance for competitive advantage. Namely, It was found that firms with less TQM executed non-strategic quality management, compared with firms more TQM.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권3호
• /
• pp.200-205
• /
• 2005

The objectives of this study were to introduce the easiest and most proper applications of datamining in industrial processes. Applying datamining in manufacturing is very different from applying it in marketing. Misapplication of datamining in manufacturing system results in significant problems. Therefore, it is very important to determine the best procedure and technique in advance. In previous studies, related literature has been introduced, but there has not been much description of datamining applications. Research has not often referred to descriptions of particular examples dealing with application problems in manufacturing. In this study, a datamining roadmap was proposed to support datamining applications for industrial processes. The roadmap was classified into three stages, and each stage was categorized into reasonable classes according to the datamining purposed. Each category includes representative techniques for datamining that have been broadly applied over decades. Those techniques differ according to developers and application purposes; however, in this paper, exemplary methods are described. Based on the datamining roadmap, nonexperts can determine procedures and techniques for datamining in their applications.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.79-85
• /
• 2003

An algorithm for fitting with Least Square is a traditional and an effective method in processing with experimental data. Due to the lack of definite representation, it is difficult to fit measured data with free curves or surfaces. B-Spline is usefully utilized to express free curves and surfaces with a few parameters. This paper presents the combination of these two techniques to process the point data measured from CMM and other similar instruments. This research shows tests and comparison of the simulation results from two techniques.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.759-762
• /
• 2000

Rapid Prototyping (RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stacking, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain RP apparatus. The objective of this study is to develop and design a new RP process, Variable Lamination Manufacturing using expandable polystyrene foam sheet as part material (VLM-S), which can make up for the disadvantage of existing techniques, and to develop an apparatus to implement the process. In order to examine the possibility of practical utilization of the proposed VLM-S process for prototyping of a general three-dimensional shape, an auto-shift lever knob and a pyramid shape were fabricated.

• 품질경영학회지
• /
• 제27권3호
• /
• pp.170-188
• /
• 1999

In all activities of companies, manufacturing processes are one of those which have the worst effect on our environment. So manufacturing companies have taken the necessary steps to comply with environmental regulations. But, most of them focused on the environmental standard control equipments, using ‘end-of-pipe techniques’ that can obtain the desired reductions in a short time-period. But these methods are essentially symptomatic treatments and are not enough for sustainable development. 3M's solution is the ‘cleaner techniques’which emphasize prevention rather than corrective control. This paper examines the concept of cleaner techniques and the environmental management system of 3M - how to conduct technological innovation to prevent generation of pollution and waste at the source under the 3P program.

• The Journal of Advanced Prosthodontics
• /
• 제14권2호
• /
• pp.122-132
• /
• 2022

PURPOSE. This in-vitro analysis aimed to compare the intaglio trueness, the antagonist's wear volume loss, and fracture load of various single-unit zirconia prostheses fabricated by different manufacturing techniques. MATERIALS AND METHODS. Zirconia crowns were prepared into four different groups (n = 14 per group) according to the manufacturing techniques and generations of the materials. The intaglio surface trueness (root-mean-square estimates, RMS) of the crown was measured at the marginal, axial, occlusal, and inner surface areas. Half of the specimens were artificially aged in the chewing simulator with 120,000 cycles, and the antagonist's volume loss after aging was calculated. The fracture load for each crown group was measured before and after hydrothermal aging. The intaglio trueness was evaluated with Welch's ANOVA and the antagonist's volume loss was assessed by the Kruskal-Wallis tests. The effects of manufacturing and aging on the fracture resistance of the tested zirconia crowns were determined by two-way ANOVA. RESULTS. The trueness analysis of the crown intaglio surfaces showed surface deviation (RMS) within 50 ㎛, regardless of the manufacturing methods (P = .053). After simulated mastication, no significant differences in the volume loss of the antagonists were observed among the zirconia groups (P = .946). The manufacturing methods and simulated chewing had statistically significant effects on the fracture resistance (P < .001). CONCLUSION. The intaglio surface trueness, fracture resistance, and antagonist's wear volume of the additively manufactured 3Y-TZP crown were clinically acceptable, as compared with those of the 4Y- or 5Y-PSZ crowns produced by subtractive milling.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.471-474
• /
• 2004

In order to quickly respond to the rapidly changing manufacturing environment, it is imperative for the system to have such capabilities as flexibility, adaptability, reusability, etc. One of the promising approaches for new manufacturing paradigm satisfying those capabilities is the fractal manufacturing system (FrMS). FrMS is based on the concept of autonomously cooperating and self-reconfigurable agents referred to as fractals. In this paper, a fractal template is proposed to have both fractal-specific and agent-specific characteristics and proper techniques for implementation are also selected. The proposed template can be easily extended to the platform of FrMS which supports simulation, shop flow control, and other research issues existed in the manufacturing systems. An example of applying the proposed template to the simulation is also presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.595-600
• /
• 1991

A competitive automated manufacturing system integrates the various control processes and data used in service of products. design, manufacturing, and, sale. CIM is a way to achieve such integration through computers and computational techniques in manufacturing, planning, and design. Developing effective CIM architectures is hampered by integration problems. The key to resolving these problems lies in a better understanding of manufacturing function and how it is related to other manufacturing functions. Integration of CIM environment requires coordinated solutions to data management problems for individual application system as well as for exchange of data between these applications. This requires a common framework for data management throughout the CIM environment. This paper discusses the design paradigm as a framework for this purpose. Designing an organizational structure to meet those goals invloves 1) analyzing the functions through functional decomposition, 2) developing a data model to coordinate functions. As a result, we propose an object-oriented design methodology for manufacturing information system.