• 산업공학
• /
• 제10권3호
• /
• pp.189-196
• /
• 1997

This paper presents a cell formation approach for a cellular manufacturing system to minimize the inter-cell moves considering operation sequences. Two new factors are introduced: (1)flow-similarity(FS) for integrating direct/indirect inter-machine flow and similarity (2)machine cell-part moves (CPM) for exactly computing inter-cell moves. FS is used for combining machines and CPM is used for assigning the parts to the preliminary machine cells. In addition, we develop an aggregated heuristic algorithm to form manufacturing machine cells and assign the parts to those cells based on these concepts. We use performance criterion called total inter-cell moves(TICM), which is the total material flow between internal cells and external cells. Results of computational tests on a number of randomly generated test problems show that the suggested heuristic is superior to existing methods.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.15-20
• /
• 2014

The manufacturing equipment on most shop floors consists of numerical control machines, and the condition of each piece of equipment is monitored and controlled by an internal sensor or programmable logic controller (PLC). To control and monitor production lines that consist of an equipment or production module, a separate control and monitoring system such as a manufacturing execution system should be introduced. However, there is no standardized system, and it is costly and difficult to build a system for small or medium-sized plants. In this paper, a PLC-based supervisory system for operation control of a group of production machines is proposed, and the developed PLC-based system is evaluated by applying it to a computer numerical control machine.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.64-72
• /
• 1998

This paper a new approach to the design of machine vision technique with a camera modeling that accounts for major sources of geometric distortion, namely, radial, decentering, and thin prism distortion. Radial distortion causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering , that is , the optical centers of lens design and manufacturing as well as camera assembly. It is our propose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing. The performance of proposed vision system is illustrated by simulation and experiment.

• 한국정밀공학회지
• /
• 제6권3호
• /
• pp.109-119
• /
• 1989

This paper discusses the system layout of flexible manufacturing system. A definition of flexible manufacturing system has not been necessarily classified yet. An understanding, and an objective of its application are different in a variety of industries. It could be treated as the system adopting flexble-Automation and FMS has been improving as a form of parts maching system. It was thought that the problems of machining function and transfer function were important. This paper introduces parts family and machine groups to increase machining function and transfer function. Parts family and machine tool groups were made up by means of multidimensional dizitizing analysis. A new software algorithm for forming parts family and machine groups has been proposed. Flexible manufacturing system was layout according to the FMS transfer function classification.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.884-889
• /
• 2000

This paper describes the design and implementation of PCOAMC(PC-based Open Architecture Machine Controller) to be flexible and independent from the vendor-oriented hardware and software structure. This openness approach is able to enhance an intelligence and integration of a manufacturing system. The development methodology of PcOAMC is an Object-Oriented approach, and all modules in PcOAMC are modelled using UML(Unified Modelling Language) that provides an easy understanding and modification. In order to demonstrate an applicability of PcOAMC, a simple test has been executed by using the Client-Server system consisting of two PcOAMCS and bus monitoring system. The good results have been obtained, so that the developed controller is expected to be embedded into IMS(Intelligent Manufacturing System) as a basic unit.

• 에너지공학
• /
• 제26권3호
• /
• pp.11-29
• /
• 2017

인공지능 특히 심층신경망기계학습기법(딥러닝)의 제조업분야에서의 이용이 효율적이며 실용적일 수 있다는 인식이 넓게 수용되고 있다 이 보고서는 최근의 신경망기계학습 개발환경을 개관하고 제조업분야에서 활용되고 있는 딥 러닝기술을 개관한다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.390-396
• /
• 2002

This study is concerned with the strict machine-cell and part-family grouping (MCPFG) in cellular manufacturing system design. Most of MCPFG methodologies often suffer from improper assignment of machines and parts in which exceptional machine has more common operations with machines in a cell other than its own cell and exceptional part has more operations through machines in a cell other than the cell corresponding to its own family. This results in the loss of similarity in part design or common setup of machines and the benefits from the conversion of job shop manufacturing into cellular manufacturing are lost. In this study, a two-phase methodology is proposed to find the machine-cells and part families under the strict constraints in which all machines and parts are assigned to its most proper cells and families. Test results with moderately medium-sized ill-structured MCPFG problems available from the literature show the substantial efficiency of the proposed approach.

• 산업경영시스템학회지
• /
• 제21권46호
• /
• pp.59-72
• /
• 1998

This study is concerned in manufacturing cell formation with operation sequences. Operation sequences must be reflected for manufacturing cell formation anyway, because the primary aim of cellular manufacturing system is to minimize the inter-cell flows, and inter-cell flows are differed by operation sequences. In this study we propose flow-similarity(FS) of reflecting both inter-machine similarity and direct/indirect flow, and then apply the modified P-median model for grouping machines. We also use machine cell-part handling frequency(CPH) so as to be assigned parts to the machine cells having the most CPH. We confirm this approach through an application example. The performance of this approach(FS-model) is evaluated and compared with P-median model and F-model through computational experiments.

• 산업경영시스템학회지
• /
• 제36권1호
• /
• pp.24-35
• /
• 2013

A cell formation approach based on cluster analysis is developed for the configuration of manufacturing cells. Cell formation, which is to group machines and parts into machine cells and the associated part families, is implemented to add the flexibility and efficiency to manufacturing systems. In order to develop an efficient clustering procedure, this paper proposes a cluster analysis-based approach developed by incorporating and modifying two cluster analysis methods, a hierarchical clustering and a non-hierarchical clustering method. The objective of the proposed approach is to minimize intercellular movements and maximize the machine utilization within clusters. The proposed approach is tested on the cell formation problems and is compared with other well-known methodologies available in the literature. The result shows that the proposed approach is efficient enough to yield a good quality solution no matter what the difficulty of data sets is, ill or well-structured.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.122-128
• /
• 2015

Recently, as the demand for high efficiency, multi-function machine tools has increased, domestic machine tool industries are investing in research and development for Gantry-Type Machining centers. In this thesis, for the purpose of evaluating machining accuracy and designing a machine tool structure, a simplified model of the main frame is suggested. The results show the general characteristics of the optimum design, and the approach is shown as practicable for the preliminary design analysis and improvement of a conceptual design of a Gantry-Type Machining center. This paper's results are expected to improve the static characteristics of Gantry-Type Machine centers. The three-dimensional finite element models proved that the modeling method might be applied to real machine tool structures.