• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.116-121
• /
• 2012

In recent years, world is faced with a transportation energy dilemma, and the transportation is dependent on a single fuel - petroleum. However, Hybrid Electric Vehicle(HEV) technology holds more advantages to reduce the demand for petroleum in the transportation by efficiency improvements of petroleum consumption. Therefore, there is a trend that lower gear noise levels are demanded in HEV for drivers to avoid annoyance and fatigue during operation. And meshing transmission error(T.E.) is the excitation that leads to the tonal noise known as gear whine, and radiated gear whine is also the dominant source of noise in the whole gearbox. This paper presents a method for the analysis of gear tooth profile and lead modification, and the predictions of transmission error and load distribution are shown under one loaded torque for the 1st gear pair of HEV gearbox. The test is also obtained before tooth micro-modification under the torque. At last, the appropriate tooth modification is used to minimize the transmission error and load distribution under the loaded torque. It is a good approach which the simulated result is used to improve the design in order to minimize the radiation gear whine noise.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.174-181
• /
• 2012

The spindle unit is a core part in high precision machine tool. Rotation accuracy of spindle unit is needed for high dignity cutting and improving the performance of machine tool. However, there are many factors to effect to rotational error motion(rotation accuracy). This study studied how rotational error motion is variation when unbalance amount is variation. Rotation accuracy of initial spindle unit is decided depending on parts and assembly such as bearing. When it is rotation, vibration and noise is appeared depending on volume of unbalance amount, so it works to decrease unbalance amount. The purpose of the study tests that unbalance amount how much effects to initial rotation condition. The result of the study shows that accuracy of parts and assembly is highly necessary to reach high rotation accuracy and unbalance amount hardly effects to initial rotation accuracy. However, it shorten spindle's life because vibration and noise is increasing by increasing unbalance amount and we can expect situation that rotation accuracy is falling by long time operation.

• 한국기계가공학회지
• /
• 제15권5호
• /
• pp.66-72
• /
• 2016

Gearboxes are mechanical components that transmit power by adjusting input and output speed and torque. Their design requirements include small size, light weight, and long lifespan. We have investigated the effects of carrier pinhole position error on the load sharing and load distribution characteristics of a planetary gear set with four planet gears. The simulation model for a simple planetary gear set was developed and verified by comparing analytical results with a putative model. Then, we derived the load sharing and load distribution characteristics under various pinhole position error conditions using the prototypical simulation model. The results showed that the mesh load factor and face load factor increased with the pinhole position error, which then influenced the safety factor for tooth bending strength and surface durability.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.67-72
• /
• 2016

Planetary gear sets are widely used in power transmission components, which have high efficiency and good durability. Their most important design parameter is the load-sharing characteristics among several planetary gears. In this study, the load sharing of planetary gears was analyzed according to the carrier pinhole position error of planetary gear sets. The loads acting on planetary gears varied with the pinhole position error of the carrier, and the load sharing of planetary gears improved as the input load increased. In addition, the load of the planetary gear with a carrier pinhole position error was relatively higher than that of other planetary gears without carrier pinhole position errors. This trend appeared more clearly in the non-floating-type carrier than the floating-type carrier.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.38-44
• /
• 2019

Various automation studies have been conducted to detect defective products based on product images. In the case of machine vision-based studies, size and color error are detected through a preprocessing process. A situation may arise in which the main features are removed during the preprocessing process, thereby decreasing the accuracy. In addition, complex systems are required to detect various kinds of defects. In this study, we designed and developed a system to detect errors by analyzing various conditions of defective products. We designed the deep learning algorithm to detect the defective features from the product images during the automation process using a convolution neural network (CNN) and verified the performance by applying the algorithm to the checker-switch failure detection system. It was confirmed that all seven error characteristics were detected accurately, and it is expected that it will show excellent performance when applied to automation systems for error detection.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.549-554
• /
• 2014

In general, there has been a lot of research concerned about the gear noise known to be proportional to gear transmission error for external gears likewise spur, helical gear, and hypoid gears. But, In the case of planetary gear set, gear noise study is insufficient because of the difficulty of designing, manufacturing, and understanding of its mechanical system. This study is aimed to develop the transmission error measurement equipment for the planetary gear sets used in the automatic transmission. By comparing the results of the transmission error and noise objectively, user could select the optimized planetary gear set which has quiet noise level before manufacturing the automatic transmission.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.68-73
• /
• 2020

The proportion of airline accidents caused by human factors is steadily increasing. The aviation industry has made considerable progress in reducing the accident rate; however, since the early 1980s, the accident rate has remained constant. Due to airspace congestion, the safety margins of these existing safety promotion methods are gradually decreasing; thus, new methods to prevent accidents and quasi-accidents must be devised. Causative factors of aviation accidents include increased air traffic due to increased air demand, increased cumulative working hours due to long-distance flights, and complicated flight environments. Accidents often occur when several small errors accumulate in the normal course of operation, rather than after a single error. Accordingly, in this study, the impacts on air navigation due to human error by aviation maintenance personnel and varying international standards (i.e., KOCA vs. F.A.A vs. EASA) analyzed, and the relationship between human decision-making and behavior was investigated. The resulting safety analysis and alternatives were presented to prevent aviation maintenance accidents and cognitive ergonomics errors.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.2054-2060
• /
• 2008

This paper aims at the performance enhancement of tension controller for the yarn manufacturing process. The tension controller is required to keep the tension constant while the yarn is manufactured by a draw and twist machine, which is essential and critical for good quality production of yarn, steel, paper, etc. This paper proposes a linear model of tension control plant to develop a precise tension control system, which is derived by the close observation of the conventional mathematical model of motor driving and tension control systems. It is shown by experiments that the proposed control system precisely maintains the tension constant within the error bound of 0.05% while the conventional PI controller has about 0.2% error. The control performance of the system has been compared to that of conventional PI control not only for constant speed control but also for transient speed control experiments.

• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.63-68
• /
• 2003

The aspherical lenses are used as objective lens of optical pickup. To examine the design factor the sample product is made before manufacturing of injection mould of lens. The optimum cutting condition of PMMA lens sample with ultra precision SPDT, the roam spindle speed, the depth of cut, the feedrate are found. The demanded surface roughness 100m Ra, aspherical form error $0.5{\mu}m$ P-V for aspherical lens of optical data storage device are satisfied.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.15-22
• /
• 1999

In this study, a machining error estimation system far vertical lathes with structural deformation and geometric errors, is realized based on the virtual manufacturing technologies. The positional and directional errors of cutting tool are determined by considering the geometric errors and dimensions of machine components and by introducing the equilibrium condition between the cutting force and structural deformation. Especially, the machining errors of vertical lathes are estimated by using the prescribed cutting test(JIS B 6331). The system can be implemented to evaluate the machining accuracies of vertical lathes at the design process and to design the high precision vertical lathes.