• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.880-884
• /
• 1995

Manufacturing environment is getting characterized by unstable market demand,short product life cycle and timebased competition. For adapting this environment,machine tools have to be further versatile functionally in order to reduce part's set-up time. Unlike existing manufacturing systems mainly to focus on part flow, it is important to control tool flow using fast tool change device and tool delivery device in parallel machines consisting of versatile machine tools, because complete operations on a part can be performed on one machine tool in a single machine set-up. In this paper, under dynamic tool allocation strategy to share tools among machine tools, we propose a real-time tool allocation and operation esequence model with an objective of minimizing flow time using autonomy and negotiation of agents in parallel machines

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.355-360
• /
• 2000

Recently, to be satisfied the consumer's demand the life cycle and the lead time of product is to be shorted. So it is important to reduce the time and cost in manufacturing prototypal mold. These days, in order to reduce the lead time and cost high speed machining is highlighted. In the paper, using the high speed machining and aluminum-7075, the fundamental experiment is implemented in the change of cutting force, machining time, surface characteristic according to the tool path. And then the prototypal mold of the automatic knob is machined.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.173-177
• /
• 2013

The purpose of this paper is to investigate the influences on mechanical properties of two-stroke cycle motor pistons manufactured by casting, conventional forging and powder forging, through the comparison of characteristics, merits and disadvantages of each forming technology. For each forming technology, the optimal process parameters were determined through the experiments for several conditions, and microstructure, hardness, tensile strength and elongation of pistons are compared and analyzed. In conventional forging process, material temperature was $460^{\circ}C$ and the die temperature was $210^{\circ}C$ for the Al 4032. The optimal condition was found as solution treatment under $520^{\circ}C$ for 5 hours, quenching with $23^{\circ}C$ water, and aging under $190^{\circ}C$ for 5 hours. In powder forging process, the proper composition of material was determined and optimal sintering conditions were examined. From the experiment, 1.5% of Si contents on the total weight, $580^{\circ}C$ of sintering temperature, and 25 minutes of sintering time were determined as the optimal process condition. For the optimal condition, the pistons had 76.4~78.3 [HRB] of hardness, and 500 [MPa] of tensile strength after T6 heat treatment.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.2
• /
• pp.118-122
• /
• 2000

A comlementary call line CR2 is curretly used to propagte the Disabled Infectious Single Cycle Herpes Simplex Virus Typee2 (DISC HSV-2) on a small Iaboratory scale upto 15 L. These cultures are initiated by passaging the cells from roller bottle cultures. Whilst this is suitable for the laboratory scale it is totally impractical for use in seeding an industrial manufacturing scaled version of the culture. It is paramount to have a robust system for passaging cells from a small microcarrierier culture system to a larger one by a serial subculturing regime. Here we report on the successes we have had in our laboratory in scaling up out production system for the DISC HSV-2 from small 1-L cultures to a 50-L vessel with the maintenance of the viral productivity. Ease of use, reproducibility and the need to minimise overall production time were factors which were taken into consideration whils developing our procedures. We were aware of the need to keep a production train simple and as short as possible as this was the amall scale study for an envisaged manufacturing process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.529-533
• /
• 1996

Recently, manufacturing industries are doing their best to increase productivity and to reduce production time. One of tile efforts is to develop user-friendly and effective CAM systems. For this purpose, a CAM system for turning was developed. In the developed system. user interacts with tile CAM system using graphical user interface (GUI) and manufacturing support functions to make NC programs effectively. Manufacturing support functions include cycle decoder. interference check be ween tool and workpicce. bar turning without air cut and dynamic/wireframe simulation. In the cycle decoder. basic options are provided to novices for their convenience. and advanced options are provided to help expert to modify the program using their knowledge. Interference check has been nil issue in tile CAM system for tuning. In this paper. when a user selects a tool. interference check between selected tools and workpieces is done automatically. Moreover. remaining shapes are calculated automatically. Then, tile CAM system requests user to input all additional tool and generates NC codes to cut tile remaining shapes. In bar turning of forged raw material, air cut should be prevented for effective machining. For this purpose, a new algorithm for bar turning was developed. Dynamic and wireframe simulation was used to verify the generated NC code.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.137-153
• /
• 2002

Viewed as a more systematic approach of creating high quality products and bringing them into market at a lower cost and in significantly less time, it attracts the attention of quality designers to quality function deployment (QFD) approach. In attempt to reduce the design cycle, the industry has responded with concurrent design effort. In a sense, concurrent engineering refers to the integration of various activities within the broad scope of the product life cycle ［17］. Over the last ten years, much has been written about QFD but little has been available in terms of the underlying guide methodology. The methodology of QFD is quite simple and many will say that they have done it in the past but just have not formalized it into the form that this discipline requires. QFD ties the product, user, value, and manufacturing viewpoints together in a continuous process of defining the product design and manufacturing requirements. The value viewpoint recognizes the cost to obtain certain functionality, and the manufacturing viewpoint addresses conformance to requirements, but in a broader sense, the variability in production. In this paper, the QFD system acquisitions are described, and two heuristic approaches solving for the complex design process, especially the size reduction of design process and precedence-constrained relationship in QFD are proposed, and the empirical example is illustrated.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.64-72
• /
• 2005

Digital manufacturing is a technology to simulate the real manufacturing process using the virtual model representing the physical schema and the behavior of the real manufacturing system including resources, processes and product information. Therefore, it can optimize the manufacturing system or prevent the bottleneck processes through the simulation before the manufacturing plan is executed. This study presents a method to apply the digital manufacturing technology for the steel cutting process in shipyard. The system modeling of cutting shop is carried out using the IDEF and UML which is a visual modeling language to document the artifacts of a complex system. Also, virtual NC simulators of the cutting machines are constructed to emulate the real operation of cutting machines and NC codes. The simulators are able to verify the cutting shape and estimate the precise cycle time of the planned NC codes. The validity of the virtual model is checked by comparing the real cutting time and shape with the simulated results. It is expected that the virtual NC simulators can be used for accurate estimation of the cutting time and shape in advance of real cutting work.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.90-97
• /
• 2014

This paper presents a simplified dynamics model, dynamics simulations, and computed torque control experiments of the Delta high-speed parallel robot. Using the typical Newton-Euler method, a simplified but accurate dynamics model with practical assumptions is derived. Accuracy and fast calculations of the dynamics are essential in the computed torque control for high-speed applications. It was found that the simplified dynamics equation is in very god agreement with the ADAMS model, and the calculation time of the inverse kinematics and inverse dynamics is about 0.04 msec. From the dynamics simulations, the cycle trajectory along the y-axis requires less peak motor torque and a lower angular velocity and less power than that along the x-axis. The computed torque control scheme can reduce the position error by half as compared to a PD control scheme. Finally, the developed Delta parallel robot prototype, half the size of the ABB Flexpicker robot, can achieve a cycle time of 0.43 sec with a 1.0kg payload.

• Industrial Engineering and Management Systems
• /
• v.14 no.4
• /
• pp.372-378
• /
• 2015

In labor-intensive enterprise, such as garment factory, assembly line is widely used as a manufacturing process for reducing costs and production time. However, for the sake of the various working capacity of worker, idle or delay may happen and influence the rear processes. If these unforeseeable delay happened continuously, it may influence the whole manufacturing process and a model, which is called limited-cycle model with multiple periods (LCMwMP), is assumed to evaluate the influence risk. In order to minimize the risk, the assignment of the workers is focused on. In this paper, we deal with an assembly line as LCMwMP model when two kinds of workers exist, whose efficiency is assumed to two different groups. We consider an optimization problem for finding an assignment of workers to the line that minimizes total expected risk, which is exchanged to expected cost by reset model of LCMwMP. First, reset model as a simple model of LCMwMP is introduced. Then, some hypotheses of the rules of the optimal worker assignment are proposed and some numerical experiments are researched assuming the processing time as Erlang distribution. Finally, the other rules on other certain conditions are discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.108-115
• /
• 2000

This paper presents a variant type process planning system for machining of dies for auto-body production. Through the analysis of dies and their manufacturing processes, the authors categorized the press dies into 15 groups according to the similarity of machining features. After critically reviewing current manufacturing procedures, a standard process plan was defined for each group. The authors present MP3D the process planning system built on the standard process plan database, and show how they apply it at the die manufacturing plant of an automobile company. MP3D is expected to reduce major losses in machining such as reworking caused by mistakenly uncut features and eventually to help to accumulate the knowledge of operators. The operation sheet MP3D produces is also used in monitoring the progress of manufacturing of dies. This paper explains the whole development cycle of a process planning system from process analysis to application so that it can help readers to develop and apply a process planning system to their machine shops.