• Environmental and Resource Economics Review
• /
• v.19 no.2
• /
• pp.413-440
• /
• 2010

Since 2000, as importance of sourcing energy emphasized caused by instability of international oil price, interests toward Caspian countries as an alternative markets has increased. Especially, Azerbaijan, as middle Asian emerging exporting country, has performed drastic economic boom because of massive amount of foreign capital flowed in and construction of BTC pipeline. However, despite this economic surge, there are unbalanced economy which is merely focusing on energy industry and pressure from increase in real exchange rate and inflation. In order to analyze the sustainability of Azerbaijan economy, the total sample time period of this paper is from January 2001 to December 2007 and the term is divided into before and after BTC line construction. Vector Error-Correction Model has been applied to analysis confirming short-term and long-term effect. As a result, Azerbaijan now face the symptoms of the recession during the time period and this is due to high oil price and increase in export influenced by BTC oil pipeline resulting in decrease in real interest rate. This conclusion is to affect competitiveness of manufacturing industry, base industry for economic proliferation, in a negative way.

• Clean Technology
• /
• v.20 no.4
• /
• pp.449-456
• /
• 2014

There has been increasing concerns for the problems of water security in countries, caused by the frequent occurrence of localized drought due to the climate change and uncertainty of water balance. The importance of fresh water is emphasized as considerable amount of usable fresh water is utilized for power generation sector producing electricity. PV power system, the source of renewable energy, consumes water for the every steps of life cycle: manufacturing, installation, and operation. However, it uses relatively less water than the traditional energy sources such as thermal power and nuclear power sources. In this study, to find out the use of water for the entire process of PV power system from extracting raw materials to operating the system, the footprint of water in the whole process is measured to be analyzed. Measuring the result, the PV water footprint of value chain was $0.989m^3/MWh$ and the water footprint appeared higher specially in poly-Si and solar cell process. The following two reasons explain it: poly-Si process is energy-intensive process and it consumes lots of cooling water. In solar cell process, deionized water is used considerably for washing a high-efficiency crystalline silicon. It is identified that PV system is the source using less water than traditional ones, which has a critical value in saving water. In discussing the future energy policy, it is vital to introduce the concept of water footprint as a supplementary value of renewable energy.

• Weed & Turfgrass Science
• /
• v.5 no.1
• /
• pp.10-16
• /
• 2016

Proper actions such as discard, return or manufacturing should be taken to imported plants contaminated with quarantine weeds. Heat-treatment has been used as a processing method in many countries such as U.S., Australia, Canada as well as Korea. This study was carried to find appropriate heat-treatment methods for devitalizing dodder seeds mixed with plant seeds. Two species of dodder seeds and six imported seeds were treated for 1, 5, 10, 15, 30, 45 minutes or 1, 2, 4, 5, 6, 8 hours at the temperatures of $75^{\circ}C$, $80^{\circ}C$, $85^{\circ}C$, $90^{\circ}C$, $95^{\circ}C$, $100^{\circ}C$ and $120^{\circ}C$. According to the study, dodder seeds were devitalized at the conditions of $85^{\circ}C$ for 2 hours, $90^{\circ}C$ for 30 minutes, $95^{\circ}C$ and $100^{\circ}C$ for 15 minutes, $110^{\circ}C$ for 10 minutes and $120^{\circ}C$ for 5 minutes. Meanwhile, seed vigours of Cosmos bipinnatus and Callistephus chinensis had no difference when compared with untreated control at the heat-treatment conditions of $85^{\circ}C$ for 2 hours, $90^{\circ}C$ for 30 minutes.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.12-21
• /
• 2017

Red mud generated in the alumina manufacturing process contains various valuable resources, but it is not comprehensively recycled yet causing severe environmental problems. In Korea, red mud is producing about 200,000 tons annually and most of them are landfilled or disposed. Red mud's recycling technology is also being developed in many countries, but red mud's recycling technologies are still lacking compared to the production rate. In this study, we analyzed the characteristics and the amount of red mud, and the current status and technology development trend. Red mud has shown that recycling studies are being carried out in fields such as construction, recycling, metal recovery, adsorbent, and pollution stabilization. In particular, technologies for recovering rare earths have been developed as worldwide because of their high economic value. The data analyzed in this study will be used as basic data for the further development of technologies in the future.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.3
• /
• pp.629-643
• /
• 2019

In the era of the 4th industrial revolution, countries around the world are conducting projects to rapidly expand smart factory to secure competitiveness in manufacturing industries. However, unlike existing factories where the network environment was closed, smart factories can be vulnerable because internal and external objects are interconnected and various ICT technologies are used. And smart factories are likely to be the subject of cyber-attacks that are designed to cause monetary damage to certain targets because economic damage is so serious when an accident occurs. Therefore, it is necessary to study and apply security for smart factories, but there is no specific smart factory system architecture, so there is no establish for smart factory security requirements. In order to solve these problems, this paper derives the smart factory architecture that can extract and reflect the main characteristics of a smart factory based on the domestic and foreign reference model of smart factories. And this paper identifies the security threats based on the derived smart factory architecture and present the security requirements to cope with them for contributing to the improvement of the security of the smart factory.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.513-527
• /
• 2018

The Tunnel Boring Machine(TBM) is relatively insufficient to cope with unpredicted changes in ground conditions as compared with Conventional Tunnelling Methods. Therefore, it is very important to predict the TBM performance at the design stage and estimate the advance rate for the calculation of the construction period. In this study, we added data to 211 TBM databases constructed in the previous study and analyzed the correlation between TBM outer diameter, maximum thrust, maximum cutterhead torque, cutterhead driving power and RPM, which are the main design and manufacturing specifications of TBM. As a result of the analysis from results obtained in the previous studies, it was confirmed that TBM outer diameter is very effective and important in estimating maximum thrust, maximum cutterhead torque, and cutterhead driving power of the TBM. As a result of comparing the regression equations derived from other TBM databases outside the country and the regression equation obtained from the present study results, the maximum thrust showed a similar tendency to each other, but the maximum torque estimated from the regression equation of this study was higher than that of other countries in the case of the large scale TBM.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.101-124
• /
• 2017

This study is to examine the current situation of the AEC (ASEAN Economic Community) and analyze macroeconomic situation of Vietnam since the launch of AEC. According to recent trade indicators, Vietnam is expected to be more productive in the manufacturing and processing sectors because it is at the heart of the global value chains (GVCs) in electronics, telephones, and textiles and shoes industry. Vietnam has signed or is negotiating free trade agreements with various countries around the world including Korea, Israel, EU and RCEP and so on. Therefore, it is expected that Vietnam's trade dependency and FDI inflows to Vietnam increase more and more. However, the fact that the proportion of exports by foreign-invested companies accounts for about 70% of the total exports implies the uncertainty of Vietnam's economy in the future. Attracting FDI investment can further reduce the competitiveness of domestic companies in Vietnam. Therefore, in order for Vietnam to maintain sustainable development in the future, it is necessary to reform the momentum of foreign-invested enterprises to the development of Vietnamese companies.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.2
• /
• pp.165-176
• /
• 2020

Customized medical care and services timely providing effective prevention and treatment by collecting and using individuals' biomedical data are recently possible and utilized for users' health care. They are developed as the real-time health care services and information is provided to individuals by using smart phones, PC, tablet, etc. Interactive communication is supported by informing managers of analysis data and results, through collected data. It is therefore the time for constructing health care. This study attempts to prepare for patent applications of technical development at this time, by analyzing the tendency of smart wearable health care technologies, including biological signal-based health care devices and real-time health care system. Patents regarding smart wearable health care technologies were reported to have the relatively higher concentration of research development. Korea focuses on patent activities for real-time health care systems across the intervals of analysis, while U.S and European countries actively make efforts for patent activities regarding health care devices Japan conduct patent activities across health care devices and systems, based on bio-technologies. Korea has recently dominated the market of patents for bio-technologies-based health care devices and real-time health care devices and also appears to secure patents for the technologies and the market, so entry barriers to the market of smart wearable health care technologies are determined to be higher in Korea. It is important to establish the portfolios of patents, by securing patent rights for the figures of products, manufacturing methods and other related technical systems, if technologies are planned to be commercialized.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.191-196
• /
• 2021

This paper proposes to strengthen the technological capabilities of small and medium enterprises on the establishment of a component standardization system and the localization of parts, which is the basis of the marine wind industry. The wind industry is a natural energy industry that countries around the world are paying attention to, and continues to invest and research and development. In particular, most companies are focusing on research and investment in component development, the smallest unit. Therefore, it is believed that we should focus on the three most fundamental and underlying wind industry, an eco-friendly energy industry that could determine the fate of the nation in the future. First, an understanding of the roadmap for standardization should be prioritized. Second, it is necessary to establish a domestic standardization of international standards according to domestic conditions. Third, localization of high value-added single products and components should be achieved by lowering dependence on overseas imports. In the future, it is hoped that the wind industry, centered on small and medium-sized enterprises, will become a solid-based national industry and be completed as a national infrastructure leading the global wind market.

• Journal of International Area Studies (JIAS)
• /
• v.14 no.1
• /
• pp.129-153
• /
• 2010

The guiding research question of this paper is to discover 'why the UK could not develop a general structure in which transnational corporations were born during the end of the 19th ~ beginning of the 20th century like other countries'. In response to this question, although acknowledging its imperfections, the author would like to explore the causality in the context of 'Social Construction' which is reflected in the attributes of British society. As such, researchers are strongly recommended to take into account the actors' interests and the increased value effect of events which is driven by control power. This paper concludes that: firstly, not only was contempt for industrial capitalism prevalent in British society, the British government was unable to recognize the necessity of promoting policies for the development of transnational corporation. In addition, the increase in the clout of commercial-financial capitalists in the city of London along with the expansion of gentlemanly elites interfered with the transnationality of British companies. Secondly, the foundation of the political and economic structures in the UK experienced continuity and challenge simultaneously. Since the 1850's, the British social structure has been progressively characterized by the strengthening power of the commercial-financial elites in London, which resulted not in the transnationality of manufacturing but that of financial services. Finally, the configuration of the social network driven by the British elites consists of the actors' interests and control power in association with severance and connection. Unlike the complementarity of interests, in the initial stage, intended connection based on voluntary motivation between gentries and commercial-financial elites occurred in terms of control power. However, ultimately, the holding of power was transferred to the commercial-financial elites excluding the industrial capitalists and resulted in the reconfiguration of the social network.