• Safety and Health at Work
• /
• 제10권3호
• /
• pp.327-335
• /
• 2019

Background: There have been some concerns related to manual handling of large items in industry. Manual handling operations of large sheet metal may expose workers to risks related to efficiency as well as occupational safety and health. Large sheet metals are difficult to move and burdensome to lift/transfer, and handling the sharp sheet edges may result in contact stress and/or cut injuries on the workers. Methods: Through observation, interview, and immersive simulation activities, a few problems related to current handling of sheet metals were identified. A sheet metal trolley-lifter was then designed and fabricated to address these issues. A pilot study on the use of the developed trolley-lifter for handling sheet metals was conducted to compare between the new and traditional handling methods. Results: The pilot study of the trolley-lifter showed promising results in terms of improving the cycle time, manpower utilization, and working postures compared with the traditional handling method. Conclusion: The trolley-lifter offers an alternative solution to automation and a mechanized assistive device by providing a simple mechanism to assist the handling of sheet metals effectively and safely.

• 대한인간공학회지
• /
• 제13권2호
• /
• pp.49-55
• /
• 1994

It is not difficult to find risky manual material handling which requires various arm exertion for moving and assembling irregular stuffs in industries. Many of workers have been hurt on their muscular and skeletal system due to the manual material handling. This study is to provide data for isokinetic muscular strength elbow flexors and extensors of Korean male and female adults. Provided standard data for isokinetic muscular strength of elbow flexous and extensors can be used for scientific and systematic analysis of arm exertionl.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.37.1-37.1
• /
• 2023

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.101-110
• /
• 2014

This study tried to identify the effects of ergonomic risk factors for absence from work of fire fighters in Korea. A self-administered questionnaire was prepared for this study. The questionnaire consisted of several parts such as 'general information', 'work-related factors', 'physical & chemical risk factors', 'ergonomic risk factors', and 'absence information'. A total of 7,098 fire fighters participated in this study. The data obtained from the survey was mainly analyzed by logistic regression. A total of 856 out of 7,098 fire fighters experienced absence from work. The risk factors such as gender, age, marital status, education level, total work year, work area. position, job rotation, noise, dust, organic solvent, skin contact with chemical substance, toxic waste, regional vibration, manual material handling, continuous standing posture, awkward working posture were associated with absence from work. Specifically, awkward working posture and manual material handling from ergonomic risk factors were major risk factors for absence from work.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.89-93
• /
• 2009

The muscular-skeletal disorders that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. This study used the psychophysical approach to determine the maximum acceptable weight(MAWL) for seven young male subjects, and used isometric and isoinertial strength variables as predictors to develop prediction models. Also, the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWL. Three different lifting frequencies(1, 3, 5lifts/min) with two lifting range from floor to knuckle height and knuckle to shoulder height for one hour's work shift using free style lifting technique were studied. These results may not only provide scientific data in establishing the safety standards for Korean workers' lifting tasks, but also contribute preventing the rapidly increasing muscular-skeletal disorders lately on the industrial site.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.153-159
• /
• 2014

Low back pain is one of major issues in musculoskeletal diseases mainly caused by MMH (Manual Material Handling) tasks. In Korea, the standards of NIOSH(National Institute for Occupational Safety and Health) Lift Equations in U. S. A. have been most widely used. However, there is no standard in case the height of one feet is higher than that of another one. Moreover, since the standards are developed in U. S. A., there are many limitations for the applicability of Korean workers. In this study, MVC(Maximum Voluntary Contraction) for four postures are measured and an empirical model based on SVR(Support Vector Regression) is constructed. Constructing SVR model, PSO(Particle Swarm Optimization) is employed to investigate the optimal parameters of SVR. The results show that the performance of this empirical model is approximately accurate, even if the deviation of experimental values is large due to the individual differences. This empirical model may contribute to establish the standards of MMH tasks in Korea.

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.11-20
• /
• 2000

Today, technologies and automation have been accelerated up in the industrial workplace. Nevertheless, many systems still require humans to handle materials manually. The Low Back Pain (LBP) is one of modern human being's most common and complex ailments. Many risk factors with the onset of LBP have been identified, however, lifting out of Manual Material Handling(MMH) was the most important factor to the LBP. The Virtual Reality(VR) is used in a variety of ways and often in a confusion and misleading manner. In order to solve the prevention of the LBP, a lifting box was translated in the Virtual Environment(VE). As simulating under the VE, optimal lifting works could be constructed. The purpose of this study is to reduce the chronical low back pain for the manual material handlers.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.52-63
• /
• 1994

산업현장에서 산업재해의 주요한 요인이 되는 중량물 수운반 활동시 작업자가 안전 하게 작업을 행하면서도 최적허용중량을 결정하기위한 연구는 주어진 작업조건하에 서 인양되는 최대중량을 결정하기 위한 기준으로서 척추에 가해지는 압력을 이용하는 생체역학적 접근법, 주어진 작업조건하에서 인양되는 최대중량을 결정하기 위한 기준 으로서 에너지 소모량을 이용하는 생리학적 접근법, 주어진 작업조건하에서사람이 인 양할 수 있는 최대중량을 결정하는 기준으로서 피실험자에의해서 인지되는 힘든 정도를 이용하는 정신물리학적 접근법 등으로수행하여 왔다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.64-71
• /
• 1994

최근 일상생활이나 산업현장에서 생산공정의 기계화 또는 자동화로 인하여 수 작업이 많이 감소하였으나 아직도 정형화 되지 못한 물건의 운반, 부품조립 등 위 험요소를 내포한 여러가지 형태로 상지 동작(arm exertion)이 요구되는 인력운반 (manual material handling) 작업이 실제 작업현장에서 행새지고 있는 실정이며, 이러한 작업으로 인해 작업자들의 근골격계 부상으로신체장애의 사례가 늘어나고 있다.