• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.47-53
• /
• 2005

The efficiency of fabrication (fab) operation is one of the key factors in order for a semiconductor manufacturing company to stay competitive. Optimization of manpower and forecasting manpower needs in a modern fab is an essential part of the future strategic planing and a very important to the operational efficiency. As the semiconductor manufacturing technology has entered the 8-inch wafer era, the complexity of fab operation increases with the increase of wafer size. The wafer handling method has evolved from manual mode in 6-inch wafer fab to semi-automated or fully automated factory in 8-inch and 12-inch wafer fab. The distribution of manpower requirement in each specialty varied as the trend of fab operation goes for downsizing manpower with automation and outsourcing maintenance work. This paper is to study the specialty distribution of manpower from the requirement in a typical 6-inch, 8-inch to 12-inch wafer fab. The human resource planning in today’s fab operation shall consider many factors, which include the stability of technical talents. This empirical study mainly focuses on the human resource planning, the manpower distribution of specialty structure and the forecast model of internal demand/supply in current semiconductor manufacturing company. Considering the market fluctuation with the demand of varied products and the advance in process technology, the study is to design a headcount forecast model based on current manpower planning for direct labour (DL) and indirect labour (IDL) in Taiwan’s fab. The model can be used to forecast the future manpower requirement on each specialty for the strategic planning of human resource to serve the development of the industry.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.773-781
• /
• 2018

In recent years, a study of power-line inspection using an unmanned aerial vehicle (UAV) has been actively conducted. However, relevant studies have been conducting power-line inspection with an UAV operated by manual control, and they have developed just power-line detection algorithm on aerial images. To overcome limitations of existing research, we propose a drone-based power-line tracking system in this paper. The main contributions of this paper are to operate developed system under configured environment and to develop a power-line detection algorithm in real-time. Developed system is composed of the power-line detection and the image-based tracking control. To detect a power-line in real-time, a region of interest (ROI) image is extracted. Furthermore, clustering algorithm is used in order to discriminate the power-line from background. Finally, the power-line is detected by using the Hough transform, and a center position and a tilt angle are estimated by using the Kalman filter to control a drone smoothly. We design a position controller and an attitude controller for image-based tracking control, and both controllers are designed based on the proportional-derivative (PD) control method. The interaction between the position controller and the attitude controller makes the drone track the power-line. Several experiments were carried out in environments where conditions are similar to actual environments, which demonstrates the superiority of the developed system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1381-1387
• /
• 2015

This paper proposes a sketch drawing system called m-shaper for musical shape generation. Through simple sketch drawing, users can generate musical shape configuration which can be played by a computer. One key ingredient of the process is a unique concept for the interactive musical shape generation that combines shape and sound based on the designers' manual inputs. m-shaper captures the numerical values of drawing characteristics and determines how the musical notes and shapes can be generated. Using a tablet, four sketch movements are captured such as pressure, tilt, rotation and speed. Each point of a shape corresponds to a certain musical note that represents a type of instrument, duration, pitch, and octave. The current m-shaper has been developed as a computational tool for supporting the schematic design process. Designers in m-shaper draw geometric sketches with a musical inspiration and explore possible conceptual forms. They also can control the parameters for results and transform their sketch drawing.

• KIISE Transactions on Computing Practices
• /
• v.21 no.11
• /
• pp.689-698
• /
• 2015

Currently, the itemized box loading operation at the Agriculture Products Processing Center which distributes agricultural products for the region is carried out manually. The process of loading agricultural products requires great manpower and had been resolved through the part-time employment of the residents of farm villages. However, recently it has become quite difficult to secure manpower as the aging within the rural community has been intensified. Hence, the necessity for countermeasures such as facility automation or use of robots have become necessary. This study suggests an automatic robot system for the itemized loading of apple boxes at the Agriculture Products Processing Center. The suggested method is to design and develop equipment such as a conveyer, robot, and bar code reader. In addition, a sorting plan, operational control, generation of control information, and software module that could monitor the inside of the Agriculture Products Processing Center is needed. After test-operating and evaluating the developed system, the existing manual work would be replaced with the automated robot system in order to enhance work efficiency and resolve safety issues.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.188-194
• /
• 2006

Since the late 1920's possibility of commercial hydroponics was testified practically. Hydroponics is used as environmentally friendly agriculture production system recently with high effectiveness. Now that existing irrigation control systems such as time control or solar radiation control cannot satisfy stable water content in root substrates, the needs for new irrigation system keep increasing. In this paper, we proposed environmentally friendly automatic irrigation management system by employing automation system based on electronic control system, which could solve problems based on manual irrigation management system. In addition, it suggested to be applied to any crops and will be able to overcome existing limit in irrigation by measuring the water content of root substrate in realtime.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.7-15
• /
• 2010

The walkway level of service (LOS) is conceptualized using pedestrian flow rate, speed, and density according to the Korean Highway Capacity Manual (KHCM). However, as it is based on the data of commuters at peak hours, it needs to be reevaluated considering various trip purposes and a pleasant pedestrian environment. Thus, the authors aimed to investigate and analyze the characteristics of each group: pedestrians during the peak hour and those during the non-peak hour. Then they were verified statistically for the walkway evaluation criteria. In this study, the authors investigated pedestrian speed and flow in a complex transit center walkway with diverse trip purposes by peak and non-peak hour. Then the authors statistically verified the differences between the groups. A model was built for estimating pedestrian density by speed and flow; it was used to calculate the walkway capacity (67.3p/m/m) corresponding to LOS E. The authors established new criteria for LOS, applying the LOS from the HCM. These standards can then be used as the design standards for pedestrian walkways.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.13-17
• /
• 2004

Purpose: The purpose of this study is to predict a reasonable direction to design a pertinent educational program in the future by evaluating an adult CPR(Cardiopulmonary Resuscitation) skill performed by EMTs engaged in fire services organization and comparing the CPR success rate of factors as like a duty place and licensed year. Methods: We studied CPR skill by the use of a CPR manikin(Skillmeter Resusci Annie, Laerdal company). The study population consisted of 320 EMTs. Every EMT performed four cycle after investigating the manikin for 2 minutes. We regarded chest compression with 100 times in a minute as the 100% success rate. We analysed the skill of chest compression, ventilation and chest compression times success rate by the records printed in the CPR paper. Results: The average success rate of chest compression was 59.42$\pm$29.26% and ventilation 49.22$\pm$29.65%. The success rate of manual CPR was different between chest compression and ventilation. Also the success rate of chest compression times was high relatively as a 87.32$\pm$9.14%(p=0.000). For the CPR skill, ventilation was lowest as 49.22%. The factors such as duty place and licensed year did not influence the CPR success rate (p>0.001). Conclusion: We could have conclusion that CPR training should be shared more time in ventilation than in chest compression. Also we could reach to a conclusion that it is important to increase the times of CPR training for improving the accuracy of CPR and that the continuing education of CPR training frequency might be more than four times in a year.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.677-684
• /
• 2017

Smart devices are used in a variety of industries, because applications for them are easy to develop and portable. However, industrial equipment can cause security problems for information and accidents when controlling the actuator of the equipment at a remote location. In this paper, we studied methods of solving these problems and the advantages of applying smart control systems to industrial equipment. We propose a manual manipulation method using queries and a smart control access procedure for controlling equipment using a smart device. In addition, we propose a data transmission method employing multiple encryption protocols and a user authentication method using unique information from the smart device and Q & A as the communication data protection and user authentication methods, respectively. In order to evaluate its performance, an operation test of the smart control system and user authentication comparison experiment were performed. In order to understand the advantages of applying the smart control system to the equipment, we conducted a comparative experiment with a teach pendant and evaluated its reaction time in case of error.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.2
• /
• pp.112-118
• /
• 2014

Objective: The purpose of this study was to investigate the effects of an exercise with and without neuromuscular electrical stimulation (NMES) of the quadriceps femoris muscle, on strength, pain, and weight distribution in patients with knee instability post surgery. Design: Randomized controlled trial. Methods: Twenty patients in the early stage of rehabilitation after knee surgery were recruited as subjects and were randomly divided into either experimental group (exercise combined with NMES) (n=10) or control group (n=10). Both groups received strength training of the lower limb for 20 min/day, 5 days/week for 4 weeks. The experimental group used NMES for unilateral quadriceps femoris training with incremental increases in the intensity of isometric contraction over 4 weeks. Outcome measurements were assessed using the digital manual muscle testing, 30-chair stand test (30CST), numeric pain rating scale (NPRS) and weight distribution using the foot analyzer before and after 4 weeks of training. Results: After the 4-week intervention, knee extensor strength increased significantly in the experimental group post intervention (p<0.05), and there was a significant improvement in the experimental group compared with the control group (p<0.05). The 30CST and NPRS scores improved significantly in the experimental group compared to the control group (p<0.05), and there was a significant difference between the two groups (p<0.05). Weight distribution was significantly improved in the experimental group compared with the control group, (p<0.05), but there was no significant difference in improvement between the two groups. Conclusions: This study showed that NMES combined with strengthening exercises of the lower limbs is effective in improving lower limb pain and strength in patients with instability after knee surgery.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.2
• /
• pp.74-78
• /
• 2019

Objective: Myofascial release (MFR) is used to restore tissue extensibility of the fascia tissue and is considered to be useful in a number of clinical settings, such as low back pain (LBP). Dynamic myofascial release (DMFR) is the manual therapy, which combined the conventional MFR with the joint mobilization. The purpose of this study was to investigate the effects of the DMFR on trunk mobility, and furthermore, whether the increase of trunk mobility can carry over the improvement of dynamic standing balance in persons with chronic nonspecific LBP. Design: Randomized controlled trial. Methods: Thirty persons with chronic non-specific LBP participated in the study and were randomly assigned to the DMFR group (n=15) or the control group (n=15). DMFR was performed for two sessions (15 minutes/session) per week for four weeks for the treatment group. Both the DMFR and control groups were allowed to perform low-intensity physical activities during the treatment period. The Modified-modified $Sch{\ddot{o}}ber$ test (MMST) for trunk mobility and the Functional Reach Test (FRT) for dynamic standing balance were measured before and after the treatment period in both the DMFR group and the control group. Results: The MMST value of DMFR group increased significantly in all trunk range of motion (flexion, extension, lateral flexion, and rotation) after treatment, compared with the control group (p<0.05). Additionally, the FRT value of the DMFR group improved significantly after treatment, compared with the control group (p<0.05). Conclusions: We suggest that DMFR have a positive effect on trunk mobility and standing balance in persons with chronic LBP.