• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1012-1015
• /
• 2004

Digital hearing aids enclose $6{\sim}8$ tiny components. Those electromechanical components are individually wired by soldering which is a manual labor and sometimes causes components' damage by heating. This paper suggests a PCB design for overcome these problems. Several PCBs are designed and manufactured and circuited to produce ITE(In-the-Ear) type hearing aids which are inserted in the ear canal. The most optimal size of the PCB design for the ITE hearing aid is presented in this paper.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2002.07a
• /
• pp.73-78
• /
• 2002

Microfluidic lab-on-a-chip (LOC) systems have enabled a new generation ofassay technologies in chemical and biomedical sciences. Caliper's microfluidic LOC systems contain a network of microscopic channels through which fluids and chemical are moved in order to perform experiments. The main advantages of these continuous-flow devices are integration and automation of multiple steps in complex analytical procedures to improve the reproducibility of the results, and eliminated the manual labor, time and pipetting errors involved in analyses. The present talk is devoted to give a brief introduction of microfluidic basics and to present in applying continuous-flow microchips to drug screening with model enzyme assays.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.3
• /
• pp.405-429
• /
• 2022

This study investigated the differences in emotional labor, job satisfaction, and organizational commitment by job type, and the effect of emotional labor on job satisfaction and organizational commitment for public library employees. Using SPSS 27.0, the survey contents were performed frequency analysis, factor analysis, validity analysis, reliability analysis, correlation analysis, and multiple regression analysis. As a result of the study, it was found that the librarianship experienced more emotional labor than non-librarians, and the frequency of emotional labor increased depending on whether or not the civil service was included, and had a negative effect on overall job satisfaction and job condition satisfaction. However, in the case of psychological response to job satisfaction, library data work was found to be high. In terms of user service, emotional labor that occurs in librarians' work has two sides, which can have both positive and negative effects on the librarian's job satisfaction and organizational commitment. Therefore, practical measures to reduce the frequency and emotional dissonance of emotional labor and increase the diversity of emotional labor should be included in the user response manual and future mental health promotion program development.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.79-89
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. From a social and economic point of views, these kinds of manual tasks bring about social inconvenience and economic loss including traffic jam and high labor costs. The objective of the study was to develop and evaluate a road stripe removal equipment using water jet technology. The following shows the results. First, It was analyzed that the obtainable productivity from the equipment developed in the study is 280% compared to the current equipment. In this study, it was also calculated the Benefit/Cost Ratio and the result showed that the ratio is 3.28, so it is expected that the equipment can produce great benefits for the relevant companies. Second, an analysis was also conducted on the traffic congestion cost, and the equipment could save about \2,550 million per day compared to the conventional equipment. Therefore, it is analyzed that the economic viability of the equipment is sufficient.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.157-160
• /
• 2002

This study was carried out to the harvesting efficiency of equipment used fer harvesting of rhizomes of Saururus chinensis Bail. Labor-saving efficiency showed 60-67% enhancement by using tillage operations with power tiller, digger attached to power tiller, and digger attached to tractor compared with manual harvest. Loss percentage of rhizomes by harvesting equipments was 2.2-8.8% lower than by manual harvest. Fresh rhizome yield and income index were increased 3-10% and 13-27% respectively by harvesting equipments, showing the highest yield and index in digger attached to tractor, Thus, digger attached to tractor showed the most effective harvest equipment for Saururus chinensis rhizome.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.124-133
• /
• 2017

In the current lighting market, LEDs that have a high luminous efficiency, a long life and consume less power have emerged as next generation lighting. Owing to various designs and sizes of LEDs, the production process of existing LEDs involves many tasks that require manual labor; hence, the assembly of LEDs necessitates manpower. Because of the use of manpower, the production costs of LEDs increases and production efficiency decreases. Recently, the assembly parts of LEDs have been standardized for minimizing manual labor, and an LED is developed as an LED panel. The automatic assembly system produces LED convergent lighting by assembling two LED panels and one diffusion cover. To increase the production efficiency of the LED convergent lighting module, it is important that the development of a feeder can continuously supply the LED panels is required, and whose design has sufficient stability. The automatic assembly system of the LED convergent lighting module consists of two feeders, which convey LED panels and diffusion covers to a main conveyor, which assembles the lifted panels and covers. In this study, structural analysis and fatigue life for forced loads on the conveyer line of the feeder in the process of lifting LED panels and diffusion covers of each feeder, is analyzed. In addition, the drive of the belt constituting the conveyor line of each feeder is simulated, and the dynamic characteristics of the belt is analyzed using the virtual engineering method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.467-473
• /
• 2013

The addition of disconnect switches to a distribution feeder or the replacement of the manual switches with the automatic switches do, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder and reducing the outage section. However, the improvement of reliability in power distribution system causes an increase of the investment cost, for example, replacement costs, labor costs, and so on. For this reason - the balance between investment and reliability improvement - many studies about the appropriate level of investment have been conducted. In this paper, we suggest the algorithm for determining the reasonable switch automation rate in the power distribution system. We evaluate the customer interruption cost and reliability for several cases - these cases relate with the switch automation rate - in the domestic metropolitan power distribution system, estimate the effectiveness of changing the manual switch to automatic switch quantitatively. These results can help the determining on the disconnect switch's automation rate.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.3
• /
• pp.35-41
• /
• 2005

The KOSHA codes H-31 and H-30 provide general guidelines to establish a prevention program for work-related musculoskeletal disorders(WMSD). Understanding of the components and practitioner needs for a WMSD prevention program is necessary for effective revision and implementation of the KOSHA codes. The present study established a comprehensive structure for a WMSD prevention program and surveyed practitioner needs for the KOSHA codes. The comprehensive prevention program structure, consisting of 7 parts(organization, education, risk management, medical management, program evaluation, and record keeping) and 90 items, was constructed by analyzing WMSD prevention guidelines published by various government agencies such as KOSHA, OSHA and NIOSH. Next, 20 practitioners, from four industry sectors(auto manufacturing, auto part manufacturing, shipbuilding, and machinery), working in a safety and health department or labor union, were interviewed to collect opinions for the KOSHA codes in terms of relevance, government support, and additional information needed. Guidelines of the KOSHA codes requiring modifications and government supports were identified, which can be used to revise the KOSHA codes and to establish a government policy to promote the implementation of the KOSHA codes. Lastly, the survey revealed that integrated, customized, quantitative, and case information for WMSD prevention is additionally needed, which can be used as design guidelines for a WMSD prevention program manual for practitioners.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.425-433
• /
• 2009

The developed final shattering machine for labor-saving mechanization of shattering of sesame consisted of input part, shattering part, re-shattering part for unshattered pod and pneumatic sorter. The bundle of sesame was held as upside down and fed into the machine continuously. Then, the fed bundle of sesame was shattered by side shock and agitation. The performance of shattering for the sun dried bundle of sesame of conventional manual work and final shattering machine was compared. Since the shattering ratio measured by the final machine was 97.2% at the first operation, in case of fully dried sesame by drying stand, the harvest of sesame can be completed by only one time shattering operation. The work hour per area of 10 a for the mechanical work and the manual work were 0.3 hour and 13.9 hour, respectively. The total shattering ratio of the final machine with vertical feedings of bundle of sesames was 97.2%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.594-601
• /
• 2006

Coding of occupational and industrial codes is a major operation in census survey of Korean statistics bureau. The coding process has been done manually. Such manual work is very labor and cost intensive and it usually causes inconsistent results. This paper proposes an automatic coding system based on example-based learning. The system converts natural language input into corresponding numeric codes using code generation system trained by example-based teaming after applying manually built rules. As experimental results performed with training data consisted of 400,000 records and 260 manual rules, the proposed system showed about 76.69% and 99.68% accuracy for occupational code classification and industrial code classification, respectively.