• Journal of Korea Water Resources Association
• /
• v.44 no.7
• /
• pp.553-563
• /
• 2011

According to the improvement of computer's performance, the development of Geographic Information System (GIS), and the activation of offering information, a distributed model for analyzing runoff has been studied a lot in recently years. The distribution model is a theoretical and physical model computing runoff as making target basin subdivided parted. In the distributed model developed by this study, the volume of runoff at the surface flow is calculated on the basis of the parameter determined by landcover data and a two-dimensional diffusion wave equation. Most of existing runoff models compute velocity and discharge of flow by applying Manning-Strickler's mean velocity equation and Manning's roughness coefficient. Manning's roughness coefficient is not matched with dimension and ambiguous at computation; Nevertheless, it is widely used in because of its convenience for use. In order to improve those problems, this study developed the runoff model by applying not only Manning-Strickler's equation but also Chezy's mean velocity equation. Furthermore, this study introduced a power law of exponential friction factor expressed by the function of roughness height. The distributed model developed in this study is applied to 6 events of fan-shape basin, oblong shape test basin and Anseongcheon basin as real field conditions. As a result the model is found to be excellent in comparison with the exiting runoff models using for practical engineering application.

• Journal of Korea Water Resources Association
• /
• v.42 no.8
• /
• pp.619-629
• /
• 2009

The objective of this study is to estimate bed-resistance in gravel-bed rivers using the equivalent roughness height($k_s$). We calculated the friction factor(f) with the measured data from 8 domestic gravel-bed rivers and investigated the size distributions of the bed materials. The averaged $k_s$ in each cross-section, which is determined under the hypothesis that the vertical velocity distribution follows the logarithmic law, is compared with the reach $k_s$ which is calculated with the cumulative grain diameter distribution curve of bed materials. Moreover, the applicability of existing formulae, such as Strickler type equations, is examined by comparing with Manning's n value converted from the $k_s$. According to the results, the reach $k_s$ proves to be a good indicator of representative characteristic of bed materials in a reach, and the Manning's n based on the reach $k_s$ is appropriate for practical estimation of the bed-resistance, for RMS errors between calculated and measured Manning's n is less than 0.003. The correlation between the $k_s$ and specified bed-material size($D_i$) is very low, so it is difficult to select a proper one among the existing empirical equations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1965-1970
• /
• 2010

국내 하천은 하천의 관리, 이용, 개발, 치수경제 및 수질 보전을 위해 각 하천에 대해 하천기본계획이 작성되고 있다. 치수와 관련하여 조도계수는 각 하천의 계획홍수량 산정 및 하천제방 등 구조물 설계에 필수적인 인자로서 조도계수의 정확도에 따라 결과에 큰 오차범위를 가지게 된다. 국내 하천기본계획은 하천의 하상재료 및 하도조건에 따라 산정되어지는 조도계수를 각 하천의 일정빈도 홍수량에 맞추어 일정한 값으로 조도계수를 추정하고 있다. 본 연구에서는 국토해양부에서 2009년 한강유역 19개 지점에 대해 관측한 자료와 하천기본계획상에 제시된 조도계수를 적용하여 산정된 값을 비교 분석하였다. 국토해양부의 관측자료 분석에 있어서 유량 관측시 관측지점의 수면경사 및 하상경사의 관측 결함으로 하천기본계획상에 제시된 지형으로부터 하상경사를 추정하였으며 1차적으로 에너지경사는 하상경사와 동일하다고 가정하였다. 또한, 하천기본계획에 제시된 조도 계수의 값은 어느 일정 홍수빈도에 대하여 산정된 값으로 국토해양부 관측자료 중 갈수기 및 평수기의 자료는 제외하고 홍수기의 관측값에 대하여 분석을 실시하였다. 이러한 가정하에 하천기본계획상에 제시된 조도계수를 인용하여 Manning-Strickler 식으로 부터 산정된 유속과 국토해양부의 관측유속을 비교 분석하였다.