• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.745-750
• /
• 2008

Uncertain dynamic parameters and joint flexibility have been problem to control robot manipulator precisely. Hence, even if the controller tracks the desired trajectory well with the feedback of the motor encoders, it is hard to achieve the desired behavior at the end-effector. In this paper, robot trajectory is taught by a general heuristic iterative learning control (ILC) algorithm in order to reduce tracking error of the tool center point (TCP) and the results of tracking with 6 DOF industrial robot manipulator are presented. The performance is verified based on ISO 9283.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.109-114
• /
• 2008

In this paper, a dynamic learning controller for robot manipulator is implemented using real-time operating system with capabilities of multitasking, intertask communication and synchronization, event-driven, priority-driven scheduling, real-time clock control, etc. The controller hardware system with VME bus and related devices is developed and applied to implement a dynamic learning control scheme for robot manipulator. Real-time performance of the proposed dynamic learning controller is tested and evaluated for tracking of the desired trajectory and compared with the conventional servo controller.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.226-234
• /
• 1998

The concept of dynamic tracking line is proposed as the feasible tracking region for a robot in a robot-conveyor system, which takes the conveyor speed into consideration. This paper presents an effective method to identify the dynamic tracking line in a robotic workcell. The maximum line speed of a robot is derived in an analytic form using the parameterized dynamics and kinematics of the manipulator, and some of its properties are established mathematically. The identification problem of the dynamic tracking line is then formulated as a root-solving problem for a single-variable equation, and solved by using a simple numerical technique. Finally, numerical examples are presented to demonstrate the methodology and its applications in workspace specification.

• 로봇학회논문지
• /
• 제16권3호
• /
• pp.270-275
• /
• 2021

Most of the initial forms of cooperative robots were intended to repeat simple tasks in a given space. So, they showed no significant difference from industrial robots. However, research for improving worker's productivity and supplementing human's limited working hours is expanding. Also, there have been active attempts to use it as a service robot by applying AI technology. In line with these social changes, we produced a mobile manipulator that can improve the worker's efficiency and completely replace one person. First, we combined cooperative robot with mobile robot. Second, we applied speech recognition technology and deep learning based object detection. Finally, we integrated all the systems by ROS (robot operating system). This system can communicate with workers by voice and drive autonomously and perform the Pick & Place task.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.688-694
• /
• 2010

This paper presents a gravity compensator for the manipulator of a service robot. The manipulator of a service robot is operated with low velocity for the safety reason in most cases. In this situation gravitational torques generated by the mass of links are often much greater than dynamic torques for motion. A gravity compensator can counterbalance the gravitational torques, thereby enabling to utilize relatively low power motors. In this paper the gravity compensation for the roll-pitch rotation is considered which is often used for the shoulder joints of the manipulator of a service robot or humanoid robot. A gimbals is implemented and two 1-dof gravity compensators are equipped at the base. One compensates the gravitational torque at the roll joint and another provides the compensational torque for the gimbals. Various analyses showed that the proposed compensator can counterbalance the gravitational torques of 87% at the pitch joint and 50% at the roll joint. It is verified from dynamic simulations that the proposed compensator effectively counterbalances the gravitational torques.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1696-1699
• /
• 1997

The robot mainpulator for inspection of pressurizer in the nuclear power plant has been developed, which consists of four parts : 2 arms, movable gripper, base frame, contorl console. To extract the damaged electric heating rod inside pressurizer, the gripper has been developed using wire lope and self-locking mechanism. for the examination of the structural stability of the robot manipulator, stress analysis is performed by using the ANSYS code.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.570-573
• /
• 2000

A control law for a SCARA robot manipulator is designed using recursive torque methods. This scheme uses previous torques and error dynamics to generate torque controls at the present time and adopts relatively simple numerical and control algorithms that can be easily realizable. In order to evaluate the performance and robustness of the suggested control system, the 2-link SCARA robot manipulator is practically implemented using a dSPACE interface. It is found that the recursive controller has a good tracking performance in spite of the presence of payload disturbances.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.702-712
• /
• 2008

This paper presents a novel approach for controlling electrically driven robot manipulators based on voltage control. The voltage-based control is preferred comparing to torque-based control. This approach is robust in the presence of manipulator uncertainties since it is free of the manipulator model. The control law is very simple, fast response, efficient, robust, and can be used for high-speed tracking purposes. The feedback linearization is applied on the electrical equations of the dc motors to cancel the current terms which transfer all manipulator dynamics to the electrical circuit of motor. The control system is simulated for position control of the PUMA 560 robot driven by permanent magnet dc motors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.912-915
• /
• 1996

The computed-torque method (CTM) shows good trajectory tracking performance in controlling robot manipulator if there is no disturbance or modelling errors. But with the increase of a payload or the disturbance of a manipulator, the tracking errors become large. So there have been many researches to reduce the tracking error. In this paper, we propose a new control algorithm based on the CTM that decreases a tracking error by generating new reference trajectory to the controller. In this algorithm we used the concept of sliding mode theory and fuzzy system to reduce chattering in control input. For the numerical simulation, we used a 2-link robot manipulator. To simulate the disturbance due to a modelling uncertainty, we added errors to each elements of the inertia matrix and the nonlinear terms and assumed a payload to the end-effector. In this simulation, proposed method showed better trajectory tracking performance compared with the CTM.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.364-368
• /
• 1992

The conventional loading process of workpieces for a CNC lathe is performaed either by human or by a general robot. It is not suitable for a general robot to load workpieces because of high price and inefficiency. Starting from the description of the environment around CNC lathes and the analysis ofloading process, we have developed the task-oriented loading manipulator. The characteristics of a loading manipulator are the following: to load/unload heavy workpieces, to decrease the whole porcess time. The air-chuck to load heavy workpiece has high clamping force and light weight. A loading manipulator has accomplished both the integration of independent automation techniques and cost-down effect of product. A loading manupulator developed in this project has been designed for general loading process. The loading manipulator is capable of carrying heavy payload with respect to weight of robot in short cycle time.