• 해양환경안전학회지
• /
• 제29권1호
• /
• pp.67-75
• /
• 2023

본 연구에서는 동명대학교 조선해양시뮬레이션센터의 Real-time 조종 및 작업 시뮬레이터를 활용한 해양구조물 설치 작업 시뮬레이션을 통해 대상의 동적 특성 및 물리적 현상을 작업, 조종 사이의 상호 영향과 함께 분석한다. 8개의 계류삭에 의해 계류되는 반잠수식 시추선의 설치 작업 시뮬레이션이 실제 현장에서의 작업과 유사한 시나리오로 수행되었고, 시추선의 위치 제어를 위한 예인선 4척와 계류삭의 Hook-up 작업을 위한 해양플랜트 지원 선박 1척이 운용되었다. 설치 작업이 수행되는 동안 대상들의 운동과 이동 경로, 계류삭 및 예인줄에 가해지는 장력 등을 실시간으로 확인하였으며, 이를 작업 과정별로 구분하여 분석하였다. 작업과 조종 시뮬레이션이 동시에 수행된 본 연구로부터 특정 환경 외력하에서 설치되는 해양구조물과 이를 위해 운용되는 선박들의 작업 절차에 따른 세부적인 거동 및 작업·조종 간의 상호 영향을 확인하였고, 이는 해상 상태 등을 고려한 해양구조물 설치 작업의 수행 가능 여부를 판단하기 위한 근거로 활용될 수 있음을 제시하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 춘계학술대회
• /
• pp.259-261
• /
• 2015

선박조종 시뮬레이션 모델은 항해사에게 요구되는 항해장비 숙달, 충돌위험 회피, 비상상황 대응 등의 해기능력 향상에 많은 기여를 하고 있으나, 인적오류에 의한 사고는 여전히 발생하고 있다. 여기서는 기존의 선박조종 시뮬레이터를 활용하여 여러 단계의 조종능력을 보유하고 있는 항해자를 대상으로 국제항공 및 해상수색구조편람(IAMSAR manual) 제3권 선내비상사태(On board Emergencies) 익수자(Person Overboard) 편에 구성되어 있는 표준 선박조종법을 검토하였다. 그리고 교육훈련 시 나타나는 항해자의 인적오류 사항을 모니터링하여 인지 시뮬레이션 모델 구축을 위한 기초자료를 검토하였다.

• 해양환경안전학회지
• /
• 제3권S1호
• /
• pp.55-73
• /
• 1997

It is well known that simulation study in the preliminary design stage of harbors or berths is of great use, since it can provide helpful informations to the designer from the view point of ship navigations. In this paper, a brief review is made in the safety assessment of ship navigation for a 320,000 DWT VLCC entering Yecocheon harbor area, which is carried out by shiphandling simulator system. The geographic data base for the harbor as well as the mathematical models of the ship and environmental effects are designed and developed. Based in the on-site inspections and interviews with pilots in Yeocheon area, basic maneuvering plans and consistence with real operation conditions. Berthing and deberthing maneuvering simulations as well as approaching and departing simulations are carried out by 3 experienced navigators according to the maneuvering plans and environmental scenarios. The simulation results are analysed in various ways to evaluate the quantitative and qualitative maneuvering difficulties and thereby to assess the safety of ship navigation in that area.

• 한국항해학회지
• /
• 제20권2호
• /
• pp.1-13
• /
• 1996

Most of the ShipHandling Simulators of full-mission-bridge system need vast area to install and even PC-based maneuvering simulators are often equipped with Steering Wheel or Engine Telegraphe etc. of data input interface, which necessarily makes the user face with excessive financial burden. These have been one of the obstacles for the officers, captains, pilots and students in access to maneuvering simulation whenever they want to try it in advance prior to actual ship maneuvering. Subsequently, all the officers and captains come to have little chances to train themselves until they arualified as a pilot after a long period of time of realship maneuvering practice on board, which means they have to control they have to control their own ship at sea without clear understanding on her maneuverability when they are forced to do it on the way. And these lack of capability for maneuvering have used so often to result in marine casualties of collision with other ships or pier facilities while maneuvering in harbor. To prevent those accidents by means of enhancing their maneuvering ability, PC-based DeskTop Simulator that allows anyong to access readily at anytime is needed and in conformation to such demand this simulator has been developed. The Software this simulator written in Turbo Pascal Ver. 5.0 has adopted MMG mathmatical model theoretically in part and also it was designed to make it possible that all numeric data inputs and outputs with graphic presentation for maneuvering operation be carried out just only with keyboard and monitor console. With the Simulation software, all the officers, captains, pilots and even students who has a proper computer at hand are expected to be able to make an attempt to simulate the maneuvering of their ownship or any other types of them at any port in which they want to do it.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.728-733
• /
• 2003

In human-mechanical cooperative systems, a significant issue is to improve the control performance and the maneuvering feeling of human operation. However, since it is not easy to evaluate the feeling of operators numerically, control engineers design controllers only through experience. Thus, in this paper, a new evaluation method for control performance of human-mechanical cooperative system is proposed based on the reserge waveform. Various distortions of waveform represent deteriorations of control performance and maneuvering feeling. In some cases, since there is a tradeoff between the control performance and the maneuvering feeling, it is difficult to compensate for both of them by usual feedback controllers. To overcome this situation, the two degrees of freedom control system is applied to human-mechanical cooperative system. Some numerical simulation results for an electric power steering system are shown to confirm the effectiveness of proposed control design method.

• 한국군사과학기술학회지
• /
• 제23권2호
• /
• pp.159-167
• /
• 2020

In actual battlefield environment, IFF radar plays an important role in distinguishing friend or foe targets and assigning unique identification code to management. Performance of IFF radar is greatly affected by radio environment including atmosphere and terrain, target maneuvering and operation mode. In this paper, M&S tool is consisted of interrogator(IFF radar) and answering machine(target) for radar performance analysis. The wave propagation model using APM(Advanced Propagation Model) and radar actuator system were modeled by considering beam waveform of individual operation beam mode. Using this tool, IFF radar performance was analyzed through two experimental results. As a result, it is expected that performance of IFF radar can be predicted in the operational environment by considering target maneuvering and operation beam mode.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.842-850
• /
• 2021

Real Time Simulation (RTS) has long been used in the nuclear power industry for operator training and engineering purposes. And, Online Simulation (OLS) is based on RTS and with connection to the plant information system to acquire the measurement data in real time for calibrating the simulation models and following plant operation, for the purposes of analyzing plant events and providing indicative signs of malfunctioning. An OLS system has been developed to support PWR operations for CPR1000 plants. The OLS system provides graphical user interface (GUI) for operators to monitor critical plant operations for preventing faulty operation or analyzing plant events. Functionalities of the OLS system are depicted through the maneuvering of the GUI for various OLS functional modules in the system.

• 해양환경안전학회지
• /
• 제17권4호
• /
• pp.383-389
• /
• 2011

선박 성능과 항해 안전의 관점에서 선박조종 특성을 아는 것은 선박 설계에서 중요한 일이다. IMO 규정에 의하면 만재 적하된 even 조건(트림=0)에서 몇가지 선박 조종 기준이 제시되어 있다. 그러나 선박은 일반적으로 항상 만재 적재 조건으로 운항되지 않는다. 따라서 선박이 IMO 규정을 만족시키고, 모든 적재 조건에서 안전하게 항행하도록 하기 위해 다양한 적재 조건에서 선박 조종 특성을 추정해야 한다. 본 논문에서 우리는 실선 실험과 시뮬레이션을 수행하여 조종특성을 조사하였다. 시뮬레이션 결과와 비교하였을 때 실선실험은 시뮬레이션 값 및 이전 연구와 그 경향이 일치한다. 실 해역에서 얻은 조종실험 데이터가 선박 조종성능 추정에 활용 될 수 있음을 확인하였고, 실시한 실해역 실험을 통하여, 선박 운항 상태에 따른 조종성의 변화를 추정할 수 있었다.

• 대한조선학회논문집
• /
• 제57권3호
• /
• pp.152-159
• /
• 2020

Ship owners had pursued higher benefits by demanding the new design and construction of ships with higher operational efficiency. There was a necessity for shipyards to suggest a more economical design and advanced operation concept in order to meet the demands. Especially, since BOG combustion and activation of the re-liquefaction unit had to be taken into account in ship design in addition to fuel oil and gas consumption, the evaluation of the operating efficiency considering the technological trends was necessary. In this paper, it was aimed to study the design philosophy and operation strategy by considering the effect of fuel oil and gas consumption, BOG combustion, and activation of the re-liquefaction unit on the operating cost for laden voyage according to ship speed, BOR, and activation of the re-liquefaction unit. For this purpose, the costs were acquired by conducting the sailing simulation of an LNGC based on a mathematical model including the maneuvering equations of motion. The design philosophy and operation strategy was reviewed in terms of the operating cost.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.1-9
• /
• 2009

A parking-assist system is defined that a driver adjusts vehicle velocity through brake pedal operation and parking-assist system controls the motion of the vehicle to follow a collision-free path. In this study, a motion control algorithm using Fuzzy inference is proposed to track a maneuvering clothoid parallel path. Simulations are performed under SIMULINK environments using MATLAB and CarSim for a vehicle model. As the vehicle model in MATLAB a bicycle model is used including lateral dynamics. The simulation results show that the path tracking performance is satisfactory under various driving and initial conditions.