• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.35.1-35.7
• /
• 2018

Background: After the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery. Case presentation: Reported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors' clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect. Another 62-year-old female patient visited the authors' clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation. Conclusions: In both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.1
• /
• pp.32-35
• /
• 2011

Purpose: Mandibular angle fractures constitute approximately 30% of mandibular fractures, and the mandibular third molar is usually in line with the fracture. This study evaluated the relationship between the extraction of a tooth in line with a mandibular angle fracture and the infection rate. Methods: One hundred and forty seven patients with mandibular angle fractures containing a tooth in line with the fracture from 2005 to 2008 were enrolled in this study. The patients were divided into two groups based on an extraction, and the infection rates were evaluated in both groups. Results: An extraction was performed in 70 patients (47.6%) and postoperative infections occurred in 14 patients (9.5%). Six (8.6%) of the 70 patients in the extraction group and 8 (10.4%) of the 77 patients in the non-extraction group had an infection. There was no significant difference between the two groups (P=0.708). Conclusion: These results show that there is no increased risk of postoperative complications when a tooth is present

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.21-33
• /
• 1997

The purpose of this study was to investigate the factors affecting the postsurgical mandibular stability for both one- and two jaw surgery. 18 for one-jaw surgerys and 24 for two-jaw surgerys among skeletal class III malocclusion patients who experienced orthodontic treatment and orthognathic surgery at Pusan National University Hospital were selected. Lateral cephalograms taken at the first visit, after presurgical orthodontic treatment, immediately after surgery and follow-up over 6 months, were traced. Based ANOVA, multiple linear regression analysis was completed for one-jaw surgery with postsurgical stability as the criterion and the magnitude of mandibular setback, the change of mandibular incisor height during surgery, the changes of mandibular plane angle and mandibular incisor angle during presurgical orthodontic treatment as affecting factors. Same analysis was completed for two-jaw surgery with postsurgical stability as the criterion and the magnitude of mandibular setback as affecting factor. The results were as follows : 1. In the one-jaw surgery cases, the magnitude of mandibular setback, the change of mandibular incisor height during surgery, the changes of mandibular plane angle and mandibular incisor angle during presurgical orthodontic treatment explained the variability in postsurgical stability with a significant $R^2$ value of 0.84. 2. In the two-jaw surgery cases, the magnitude of mandibular setback explained the variability in postsurgical stability with a significant $R^2$ value of 0,28.

• Archives of Reconstructive Microsurgery
• /
• v.9 no.1
• /
• pp.6-14
• /
• 2000

Reconstruction of the composite mandibular defect resulting from ablative resection of tumor involved jaw has been challenging task to the plastic surgeon. A wide variety of different techniques were used with limited success until the advent of microsurgery. The high success rate of microsurgical procedures has allowed for significant improvement in both functional and aesthetic results. A variety of free flap donor sites have been used successfully for mandibular reconstruction. Between April of 1991 and August of 1998, 20 mandibular reconstructions were performed for oncologic defects. 4 patients underwent mandibular reconstruction with pectoralis major flap, 3 patients with free nonvascularized bone graft, 1 patient with metal plate. 12 patients underwent microvascular mandibular reconstruction(8: fibula, 4: ilium). The type of free flap was determined by the requirements of the defect. Satisfactory aesthetic and functional results were achieved in all cases without significant complications. So microvascular mandibular reconstruction should be considered as primary choice in all mandibular defect without hesitation.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.164-171
• /
• 2000

Purpose : This study was aimed at measuring the changes in the hyoid bone position, tongue position, and pharyngeal airway space in subjects with mandibular setback osteotomies. Methods : Twenty patients were evaluated retrospectively for their changes in pharyngeal airway space, tongue and hyoid bone positions. All patients underwent surgical mandibular setback using bilateral sagittal split osteotomies. The cephalometric analysis was performed preoperatively, and 1 week, 3-6 months, and 1 year postoperatively. Result : The hyoid bone moved inferiorly and posteriorly immediately after surgery, and it returned to the preoperative position during follow-up period. The nasopharyngeal airway space was not significantly changed after surgery. A considerable decrease in the oropharyngeal and hypopharyngeal airway spaces following mandibular setback surgery was found. The upper and lower tongue was posteriorly repositioned immediately after surgery. During follow-up period, the hypopharyngeal airway space and lower tongue posture returned to the preoperative positions, but the oropharyngeal airway space and upper tongue posture were not significantly changed. The position of pogonion remarkably changed to backward immediately after surgery, but slightly anterior advancement was found during follow-up period. Conclusion : Immediately after mandibular setback surgery, the oropharyngeal and hypopharyngeal airway spaces obviously decreased due to posterior and inferior repositions of the tongue and hyoid bone. During follow-up period, lower tongue and hyoid bone returned to the preoperative positions, it was related to advancement of the pogonion in this period. The narrowing of the oropharyngeal airway space and posterior movement of the upper tongue posture were relatively permanent after mandibular setback surgery. We suspected this phenomenon had an influence on maintaining the total volume of oral cavity against mandibular setback.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.1
• /
• pp.51-54
• /
• 2013

Purpose: The purpose of this study is to evaluate the difference between open reduction and internal fixation (ORIF) and intermaxillary fixation (IMF) of mandibular fractures. Methods: A total of one hundred twenty-seven patients who were treated for mandibular fractures at Chosun University Dental Hospital, from January 2008 to December 2010, and analyzed their prognoses based on the use of IMF at the time of fracture reduction. The patients were divided into two groups; the manual reduction group without IMF and IMF group. Results: After reduction of the mandibular fracture, good results were obtained with majority patients. Nonetheless, seven patients (13.0%) in manual reduction method without arch bars or IMF, developed complications after surgery. Three patients underwent IMF due to occlusal instability after surgery, while one patient underwent re-operation. Thus, a significant difference was not observed between the IMF and manual reduction groups. Conclusion: Manual reduction and IMF at mandibular simple fracture could produce good results. In case of mandibular simple fracture, it was recommended with only manual reduction without IMF or IMF during a short period.

• Archives of Craniofacial Surgery
• /
• v.19 no.2
• /
• pp.152-156
• /
• 2018

Mandibular defects lead to severe deformation and functional deficiency. Vascularized osteocutaneous tissue has been widely used to reconstruct the mandible. However, it is technically challenging to shape this type of grafts in such a manner that they resemble the configuration of the mandible. A 48-year-old female patient who underwent anterolateral thigh (ALT) flap coverage after a tongue cancer excision was diagnosed with a tumor recurrence during the follow-up. A wide excision mandibulectomy and mandibular reconstruction with an ALT flap and a titanium implant were performed. The prefabricated titanium implant was fixed to the condyle. Then, an ALT flap was harvested from the ipsilateral thigh and anastomosed. After confirming that the circulation of the flap was intact, the implant was fixed to the parasymphysis. On the radiograph taken after the surgery, the prosthesis was well positioned and overall facial shape was acceptable. There was no postoperative complication during the follow-up period, 1 year and 2 months. The prefabricated implant allows the restoration of facial symmetry without harvesting autologous bone and it is a safe and effective surgical option for mandibular reconstruction.

• Archives of Craniofacial Surgery
• /
• v.22 no.1
• /
• pp.45-51
• /
• 2021

Background: Mandibular deficiency leading to facial asymmetry causes cosmetic deformity as well as psychological stigma for the patient. Correction of these mandibular asymmetries is a major challenge. The study investigates the efficacy of bidirectional mandible distraction for the treatment of mandibular deficiency. Methods: This prospective study included six individuals aged between 17 and 24.4 years. Five patients had hemifacial microsomia and one had unilateral temporomandibular joint ankyloses. All patients underwent mandibular distraction osteogenesis. Postoperative skeletal changes in affected mandible, and changes in occlusal plane and oral commissure cant were evaluated using three-dimensional reconstruction. Patient satisfaction and understanding of the procedure were assessed through three questionnaires administered during pre-distraction, distraction and post-distraction phases. Results: In pre-distraction phase, aesthetic appearance seemed to be the primary indication for surgery. In distraction phase, pain while chewing was the primary handicap. In post-distraction phase all patients were satisfied with the aesthetic outcome. The facial deformity was improved through mandibular distraction osteogenesis. On the affected side in all the patients, height and length of the mandible increased. Canting of the occlusal plane and oral commissure was corrected. Conclusion: Bidirectional mandible distraction is an effective treatment for correction of mandible deformities in adult patients.

• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.367-375
• /
• 2000

If a mandibular prognathic patient has an extremely unnatural anteroposterior and vertical maxilla or keen esthetical perception for facial profile, orthognathic surgery must be performed along with orthodontic treatment, which alone cannot provide satisfactory results in this case. Esthetical improvement becomes an important factor in the satisfaction level of the patient's treatment result, but an attempt to objectively measure beauty holds many problems. Therefore, in the end, the patient submits the final esthetical evaluation based on his/her subjective viewpoint. Because Korean people have a tendency to prefer the facial appeareance of westerners, they favor an oval shaped face over the traditional round face. This research was conducted in response to the complaints raised by patients who claim that their face had become more round from widening of facial width after the orthognathic surgery for manidibular prognathism than before the surgery. The following results were obtained on the changes in facial appearance and patient satisfaction level by analyzing the skull P-A analysis of total of 14 patients (8 male and 6 female) who underwent orthognathic surgery primarily chief complaint for manidibular prognathism and from their responses on questionnaires. These results are to be used in the research on the pre- and post- operative changes in facial height and width from orthognatic surgery. 1. Three ($21.4\%$) of 14 patients said that their face had widened. 2. The A group showed no change in mandibular width but B group showed a 0.7mm reduction. The facial width increased by 0.45mm and 0.66mm in groups A and B, respectively, after the orthognathic surgery 3. After the surgery the facial length changed by an 0.52mm increase in upper facial height , 1.19mm reduction in lower facial height, and 0.7mm reduction in mandibular height in group A. In group B group, there was a 0.67mm reduction in upper facial height, 3.66mm reduction in lower facial height, and 5mm reduction in mandibular height. 4. In reference to facial width, the facial height showed $1.5\%$ reduction in group A and $3.6\%$ reduction in group B after the surgery. 5. In reference mandibular height-to-facial width ratio, there was a $1.3\%$ reduction in group A, and $4.4\%$ reduction in group B after the surgery. 6. In reference to the mandibular height-to-width ratio, there was a $1.3\%$ reduction in group A and $4.3\%$ reduction in group B after the surgery. 7. Although the change in the facial width due to surgery can be ignored, sufficient explanation should be Provided to the patient before surgery on the fact that the face can appear to be relatively wide because of the reduced facial length as result of the surgery.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.4
• /
• pp.289-300
• /
• 2006

This study was performed to investigate the influence of orthognathic surgery on the temporomandibular dysfunction in skeletal class III malocclusion. The temporomandibular joint status in 22 patients(mean age: 23.7 years) who received orthognathic surgery such as mandibular BSSRO(14 patients), maxillary Le Fort I osteotomy with mandibular BSSRO(8 patients) was evaluated by craniomandibular index. All these patients received orthognathic surgery at least 6 months ago. The mean score and standard deviation was obtained and compared with that of 22 normal individuals(mean age: 24.8years) by Student's t-test. In mandibular movement, the score of orthognathic surgery group was higher than that of the normal group. All the items except mandibular movement did not show any differences between the two groups.