• The Journal of Advanced Prosthodontics
• /
• 제13권2호
• /
• pp.79-88
• /
• 2021

Purpose. To assess peri-implant stress distribution using finite element analysis in implant supported fixed partial denture with occlusal schemes of cuspally loaded occlusion and implant protected occlusion. Materials and methods. A 3-D finite element model of mandible with D2 bone with partially edentulism with unilateral distal extension was made. Two Ti alloy identical implants with 4.2 mm diameter and 10 mm length were placed in the mandibular second premolar and the mandibular second molar region and prosthesis was given with the mandibular first molar pontic. Vertical load of 100 N and and oblique load of 70 N was applied on occlusal surface of prosthesis. Group 1 was cuspally loaded occlusion with total 8 contact points and Group 2 was implant protected occlusion with 3 contact points. Results. In Group 1 for vertical load, maximum stress was generated over implant having 14.3552 Mpa. While for oblique load, overall stress generated was 28.0732 Mpa. In Group 2 for vertical load, maximum stress was generated over crown and overall stress was 16.7682 Mpa. But for oblique load, crown stress and overall stress was maximum 22.7561 Mpa. When Group 1 is compared to Group 2, harmful oblique load caused maximum overall stress 28.0732 Mpa in Group 1. Conclusion. In Group 1, vertical load generated high implant stress, and oblique load generated high overall stresses, cortical stresses and crown stresses compared to vertical load. In Group 2, oblique load generated more overall stresses, cortical stresses, and crown stresses compared to vertical load. Implant protected occlusion generated lesser harmful oblique implant, crown, bone and overall stresses compared to cuspally loaded occlusion.

• 치과방사선
• /
• 제16권1호
• /
• pp.113-126
• /
• 1986

This study was undertaken to document and better define this condition to help clarify this clinical and radiographic appearances by the analysis of clinical and radiographic features of cementoma. A study was made of a series of 104 cases with cementoma. This investigation of cementoma revealed the following features: 1. The female occurred in 73% of periapical cemental dysplasia and benign cementoblastoma, and 80% of cementifying fibroma. 2. 40% of periapical cemental dysplasia occurred in the fifth decades, and 73% of benign cementoblastoma during the second and third decades, while there was no age predilection in the cementifying fibroma. 3. 63% of periapical cemental dysplasia occurred in the mandibular anterior region. 91% of benign cementoblastoma and 80% of cementifying fibroma occurred in the mandibular premolar and/or molar region. 4. There were no cases complaining the associated clinical signs and subjective symptoms in the periapical cemental dysplasia, however the patient complained the pain in 36% of benign cementoblastoma and 40% of cementifying fibroma. 5. There were no cases expanding the cortical plates in the periapical cemental dysplasia, however 73% of benign cementoblastoma and all of 5 cases of cementifying fibroma showed the expansion of cortical plates. 6. Several radiographic features of the periapical cemental dysplasia were shown: a. 29% of the cases had multiple lesions. b. 53% of the cases were in the mature stage. c. During the osteolytic stage, the alveolar lamina dura was lost in 89% of the cases.

• 대한치과교정학회지
• /
• 제45권2호
• /
• pp.95-101
• /
• 2015

The aim of this case report is to describe the treatment of a patient with skeletal Class III malocclusion with maxillary retrognathia using skeletal anchorage devices and intermaxillary elastics. Miniplates were inserted between the mandibular lateral incisor and canine teeth on both sides in a male patient aged 14 years 5 months. Self-drilling mini-implants (1.6 mm diameter, 10 mm length) were installed between the maxillary second premolar and molar teeth, and Class III elastics were used between the miniplates and miniscrews. On treatment completion, an increase in the projection of the maxilla relative to the cranial base (2.7 mm) and significant improvement of the facial profile were observed. Slight maxillary counterclockwise ($1^{\circ}$) and mandibular clockwise ($3.3^{\circ}$) rotations were also observed. Maxillary protraction with skeletal anchorage and intermaxillary elastics was effective in correcting a case of Skeletal Class III malocclusion without dentoalveolar side effects.

• 대한소아치과학회지
• /
• 제36권2호
• /
• pp.253-261
• /
• 2009

치아 맹출은 나이, 성별, 인종, 시대에 따라 시기 및 순서의 차이가 있으나, 교과서에 인용되어 임상에서 사용되는 영구치 맹출 및 치근 형성에 대한 자료는 1933년 Logan과 Kronfeld가 발표한 것이므로 현재 한국 어린이의 영구치 맹출 경향과 차이가 있을 수 있다. 따라서 이번 연구의 목적은 한국 어린이의 영구치 맹출연령을 구하고, 이를 근거로 맹출순서를 알아보며, 이전 국내외 연구 자료와 비교하여 차이를 알아보는 것이다. 이에 1998년부터 2005년까지 연세대학교 치과대학병원 소아치과에 내원하여 구강검진을 시행한 E-초등학교의 어린이 중만 6세에서 만 12세의 2,619명 (남자 1,307명 여자 1,312명)의 자료를 수집하여 영구치의 맹출시기 및 순서에 대해 연구한 바 다음과 같은 결론을 얻었다. 1. 상악의 영구치 맹출시기는 중절치는 남자 만 6.81세, 여자 만 6.73세, 측절치는 남자 만7.78세, 여자 만7.65세, 견치는 남자 만10.48세, 여자 만9.92세, 제 1소구치는 남자 만9.76세, 여자 만9.63세, 제2소구치는 남자 만10.65세, 여자 만10.49세 제 1대구치는 남자 만6.39세, 여자 만6.26세, 제2대구치는 남자 만12.13세, 여자 만 12.03세로 나타났다. 2. 하악의 영구치 맹출시기는 중절치는 남녀 모두 정확한 시기의 측정은 불가능하였지만, 만 6.08세 이전에 맹출한다는 것을 추정할 수 있었고, 측절치는 남자 만6.78세 여자 만6.65세, 견치는 남자 만9.76세, 여자 만9.05세, 제1소구치는 남자 만9.82세, 여자 만9.59세, 제2소구치는 남자 만10.67세, 여자 만10.52세, 제1대구치는 남자 만6.22세, 여자 만 6.12세, 제2대구치는 남자 만11.58세, 여자 만 11.14세로 나타났다. 3. 맹출순서는 상악은 제1대구치, 중절치, 측절치, 제1소구치, 견치, 제2소구치, 제2대구치 순이었고, 하악은 중절치, 제1대구치 측절치, 견치, 제1소구치, 제2소구치 제2대구치 순이었다. 4. 모든 영구치에서 남자보다 여자가 빨리 맹출하였으며, 상악은 약 0.19세, 하악은 약 0.29세 먼저 맹출하였다. 5. 남녀 모두 상악은 측절치와 제1소구치 사이, 하악은 측절치와 견치 사이에 휴지기가 있었고. 남자의 휴지기는 상악 1.98년, 하악 2.98년, 여자는 상악 1.98년, 하악 2.40년이었다.

• 대한치과교정학회지
• /
• 제44권1호
• /
• pp.36-43
• /
• 2014

Objective: The purpose of this study was to quantitatively evaluate the cortical bone densities of the maxillary and mandibular alveolar processes in adults with different vertical facial types using cone-beam computed tomography (CBCT) images. Methods: CBCT images (n = 142) of adult patients (20-45 years) were classified into hypodivergent, normodivergent, and hyperdivergent groups on the basis of linear and angular S-N/Go-Me measurements. The cortical bone densities (in Hounsfield units) at maxillary and mandibular interdental sites from the distal aspect of the canine to the mesial aspect of the second molar were measured on the images. Results: On the maxillary buccal side, female subjects in the hyperdivergent group showed significantly decreased bone density, while in the posterior region, male subjects in the hyperdivergent group displayed significantly decreased bone density when compared with corresponding subjects in the other groups (p<0.001). Furthermore, the subjects in the hyperdivergent group had significantly lower bone densities on the mandibular buccal side than hypodivergent subjects. The maxillary palatal bone density did not differ significantly among groups, but female subjects showed significantly denser palatal cortical bone. No significant difference in bone density was found between the palatal and buccal sides in the maxillary premolar region. Overall, the palatal cortical bone was denser anteriorly and buccal cortical bone was denser posteriorly. Conclusion: Adults with the hyperdivergent facial type tend to have less-dense buccal cortical bone in the maxillary and mandibular alveolar processes. Clinicians should be aware of the variability of cortical bone densities at mini-implant placement sites.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.675-694
• /
• 2000

The purpose of this study was to investigate the displacement of and the stress distribution on the prosthesis, abutment, and its supporting tissues under functional load, and the effect of alteration in root length of 2nd abutment. The 3-dimensional finite element method was used and the finite element models were prepared in which the abutments of left mandibular 5 unit axed partial denture were canine, the 1st pre-molar and the 2nd molar, and the root lengths of canines were as follows. Model I : Root length of canine was 2mm longer than the 1st premolar Model II : Root length of canine was 2mm shorter than the 1st premolar Static compressive force of 300N was applied to connector between 2nd premolar & 1st molar, and then von Mises stress, displacement and reaction force were obtained. The results were as follows : 1. In fixed partial denture, prosthesis under load on pontic was rotated around mesio-distal long axis of it from longual side to buccal, and simultaneously bended in buccal and gingival direction with mesial end deformed in gingival direction and distolingual end in occlusal. 2. Clinical crowns of abutments were bended in the same directions with those in which prosthesis deforms. Due to that, roots of anterior abutments were twisted in counterclockwise with concentration of shear stress on distal or distobuccal sides of their cervices, and that of posterior was in clockwise with concentration of shear stress on mesiobuccal side of it in the same level with anterior abutments. 3. In case that root length of the 2nd abutment was longer than that of the 1st abutment, its displacement and reaction force which means the force tooth exerts on the surrounding periodontal tissues were smaller but shear stress on itself was larger than in the case root length of 2nd abutment was shorter.

• 대한치과교정학회지
• /
• 제35권1호
• /
• pp.23-34
• /
• 2005

본 연구에서는 III급 수술-교정 치료 방법에 영향을 미치는 치열 상의 요소를 파악함으로써 술전 교정시 상악 소구치 발치와 비발치의 판단에 필요한 임상적 정보를 얻고자 골격성 III급 부정교합 환자의 수술-교정 치료시 흔히 선택되는 상악 제1소구치 발치로 치료된 군과 비발치로 치료된 군 간의 치료전/후 상/하악 개별 치아 이동 양상과 치열궁 폭경의 변화 양상을 비교 분석하였다 이를 위하여 비발치로 III급 수술-교정 치료를 마친 환자 (24명) 와 술전교정 치료시 상악 제1소구치가 발치된 환자 (31 명)의 치료 전/후 모형 상에서 개개 치아의 근원심/협설측 각도 변화와 상/하 치열궁 폭경의 변화를 측정한 후, 두 군 사이의 교정적 치아 이동 양상을 비교 분석한 후 상/하 치열궁의 조화를 이루는데 필요한 치열궁 폭경의 변화와 이에 기여하는 치아 변위와의 관계를 분석하기 위하여 상관 분석과 회귀 분석을 시행한 결과 발치 군은 비발치 군에 비하여 상악 치열궁 폭경의 감소가 컸으며 이는 상악 구치의 inclination 감소에 크게 영향 받은 것으로 관찰되었다. 하악 치열에서는 inclination의 증가와 폭경의 증가가 있었으나, 비발치/발치군간의 차이는 유의하지 않았다 본 연구의 결과 결론적으로 III급 수술-교정 치료시 술전 상악 소구치 발치는 상악 구치부 치열궁 폭경의 감소에 크게 영향을 미치므로, 상악 소구치 발치에 대한 판단은 상/하악 치열궁의 폭경 및 구치부 경사도 문제와 연계하여 고려해야 할 사항으로 생각되었다.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.268-277
• /
• 2020

This case report demonstrates two different uprighting mechanics separately applied to mesially tipped mandibular first and second molars. The biomechanical considerations for application of these mechanisms are also discussed. For repositioning of the first molar, which was severely tipped and deeply impacted, a novel cantilever mechanics was used. The molar tube was bonded in the buccolingual direction to facilitate insertion of a cantilever from the buccal side. By twisting the distal end of the cantilever, sufficient uprighting moment was generated. The mesial end of the cantilever was hooked over the miniscrew placed between the canine and first premolar, which could prevent exertion of an intrusive force to the anterior portion of the dentition as a side effect. For repositioning of the second molar, an uprighting mechanics using a compression force with two step bends incorporated into a nickel-titanium archwire was employed. This generated an uprighting moment as well as a distal force acting on the tipped second molar to regain the lost space for the first molar and bring it into its normal position. This epoch-making uprighting mechanics could also minimize the extrusion of the molar, thereby preventing occlusal interference by increasing interocclusal clearance between the inferiorly placed two step bends and the antagonist tooth. Consequently, the two step bends could help prevent occlusal interference. After 2 years and 11 months of active treatment, a desirable Class I occlusion was successfully achieved without permanent tooth extraction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.33.1-33.7
• /
• 2019

Background: The concept of the ideal morphology for the alveolar bone form is an important element to reconstruct or restore the in maximizing esthetic profile and functional alveolar bone restoration. The purpose of this preliminary study is to evaluate the normal alveolar bone structure to provide the standard reference and guide template for use in diagnosing for implant placement, determining the correct amount of bone augmentation in actual clinical practice and producing prostheses based on three-dimensional imaging assessment of alveolar bone. Methods: This study was included 11 men and 11 women (average age, 22.6 and 24.5 years, respectively) selected from among 127 patients. The horizontal widths of alveolar bone of maxilla and mandible were measured at the crestal, mid-root, and root apex level on MDCT (multi-detector computed tomography) images reconstructed by medical imaging software. In addition, tooth dimensions of the central incisors, canines, second premolars, and first molars of maxilla and mandible, including the horizontal width of the interdental alveolar bone crest, were also measured and statistically analyzed. Results: The horizontal alveolar bone width of the palatal side of maxilla showed a distinct increment from the alveolar bone crest to the apical region in both anterior and posterior areas. The average widths of the maxillary alveolar ridge were as follows: central incisor, 7.43 mm; canine, 8.91 mm; second premolar, 9.57 mm; and first molar, 12.38 mm. The average widths of the mandibular alveolar ridge were as follows: central incisor, 6.21 mm; canine, 8.55 mm; second premolar, 8.45 mm; and first molar, 10.02 mm. In the buccal side, the alveolar bone width was not increased from the crest to the apical region. The horizontal alveolar bone width of an apical and mandibular border region was thinner than at the mid-root level. Conclusions: The results of the preliminary study are useful as a clinical guideline when determining dental implant diameter and position. And also, these measurements can also be useful during the production of prefabricated membranes and customized alveolar bone scaffolds.

• Journal of Oral Medicine and Pain
• /
• 제23권4호
• /
• pp.379-385
• /
• 1998

A patient with TMJ osteoarthritis and anterior open bite was treated with an intermaxillary traction device. Pretreatment examination revelaed a pain in both TMJ during mouth opening, moderate tendernesso f left sternocleidomastoid and right trapezius muscles. Anterior open Bite was aobserved with interincisal distance of 2mm. Tomograms and MRI showed anterior disc displacement withouit reductoin of both temporomandibular joints, and the condyles were flattened and slightly eroded. A pair of full-coverage occlusal appliances was made on both maxillary and mandibular dentition, with pivoting fulcrum on the site of the second moalr. Traction force was gained by the intermaxillary orthodontic elastics which were hooked by orthodontic brackets on the labial surfaces of the upper and lower anterior and premolar teeth. After 8 weeks of traction treatment, the joint pain was subsided completely and the anterior open bite was closed to get an edge to edge relationship of anterior teeth.