• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.63-94
• /
• 1990

The purpose of this study was to analyze the displacement and the magnitude and the mode of distribution of the stresses in the lower overdenture, the mucous membrane, the abutment tooth and the mandibular supporting bone when various denture base materials, such as acrylic resin and 0.5mm metal base, and various denture base designs were subjected to different loading schemes. For this study, the two-dimensional finite element method was used. Mandibular arch models, with only canine remaining, were fabricated. In the first denture base design, a space, approximately 1mm thick, was prepared between the denture and the dome abutment. In the second denture base design, contact between the denture and the dome abutment was eliminated except the contact of the occlusal third of the abutment. In order to represent the same physiological condition as the fixed areas of the mandible under loading schemes, the eight nodes which lie at the mandibular angle region, the coronoid process and the mandibular condyle were assumed to be fixed. Each model was loaded with a magnitude of 10 kgs on the first molar region(P1) and 7 kgs on the central incisal region (P2) in a vertical direction. Then the force of 10 kgs was applied distributively from the first premolar to the second molar of each model in a vertical direction(P3). The results were as follows. : 1. When the testing vertical loads were given to the selected points of the overdenture, the overdenture showed the rotatory phenomenon, as well as sinking and the displacements of alveolar ridge, abutment and lower border of mandible under the metal base overdenture were less than those under the acrylic resin overdenture. 2. The maximum principal stresses(the maximum tensile stresses) being considered, high tensile stresses occured at the buccal shelf area, the posterior region of the ridge crest and the anterior border region of the mandibular ramus. 3. The minimum principal stresses(the maximum compressive stresses) being considered, high compressive stresses occured at the inferior and posterior border region of the mandible, the mandibular angle and the posterior border region of the mandibular ramus. 4. The vertical load on the central incisal region(P2) produced higher equivalent stress in the mandible than that on any other region(P1, P3) because of the long lever arm distance from the fixed points to the loading point. 5. Higher equivalent stresses were distributed throughout the metal base overdenture than the resin base overdenture under the same loading condition. 6. The case of occlusal third contact of the abutment to the denture produced higher equivalent stresses in the abutment, the mandibular area around the abutment and the overdenture than the case of a 1mm space between the denture and the abutment. 7. Without regard to overdenture base materials and designs, the amounts and distribution patterns of equivalent stresses under the same loading condition were similar in the mucous membrane.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.108-119
• /
• 2020

Objective: The primary objective of this study was to quantitatively analyze the bone parameters (thickness and density) at four different interdental areas from the distal region of the canine to the mesial region of the second molar in the maxilla and the mandible. The secondary aim was to compare and contrast the bone parameters at these specific locations in terms of sex, growth status, and facial type. Methods: This retrospective cone-beam computed tomography (CBCT) study reviewed 290 CBCT images of patients seeking orthodontic treatment. Cortical bone thickness in millimeters (mm) and density in pixel intensity value were measured for the regions (1) between the canine and first premolar, (2) between the first and second premolars, (3) between the second premolar and first molar, and (4) between the first and second molars. At each location, the bone thickness and density were measured at distances of 2, 6, and 10 mm from the alveolar crest. Results: The sex comparison (male vs. female) in cortical bone thickness showed no significant difference (p > 0.001). The bone density in growing subjects was significantly (p < 0.001) lower than that in non-growing subjects for most locations. There was no significant difference (p > 0.001) in bone parameters in relation to facial pattern in the maxilla and mandible for most sites. Conclusions: There was no significant sex-related difference in cortical bone thickness. The buccal cortical bone density was higher in females than in males. Bone parameters were similar for subjects with hyperdivergent, hypodivergent, and normodivergent facial patterns.

• 대한소아치과학회지
• /
• 제30권3호
• /
• pp.459-464
• /
• 2003

함치성 낭종이란 퇴축법랑상피와 법랑질 표면 사이에 체액이 축적되어 치관이 내강의 안쪽에 있으며 치근은 바깥쪽에 위치하는 매복치 치관을 둘러싸는 치원성 낭을 의미한다. 함치성 낭종의 치료법으로는 적출술, 조대술, 감압술 및 외과적 절제술이 있다. 본 증례는 하악 제2유구치의 만기잔존을 주소로 내원한 환아들을 검사하였다. 두 환아에서 해당 제2유구치의 협측부에서 팽융을 관찰하였다. 두 환아, 모두 방사선사진상 하악 제2소구치의 치관을 포함한 단방성의 방사선투과상이 보였으며 조직검사 결과 함치성 낭종으로 진단되었다. 본 증례에서 발치와를 통한 조대술을 시술하였다. 제2유구치를 발거하고 바세린 거즈로 발치와를 보호한 후 익일에 보격장치를 겸한 obturator를 장착해 주었다. 시술 후 매복된 영구치는 정상 맹출속도보다 빠르게 맹출하는 양상을 보이고 있다.

• Journal of Periodontal and Implant Science
• /
• 제43권6호
• /
• pp.315-322
• /
• 2013

Purpose: In this study, we investigated the effect of silk scaffolds on one-wall periodontal intrabony defects. We conjugated nano-hydroxyapatite (nHA) onto a silk scaffold and then seeded periodontal ligament cells (PDLCs) or dental pulp cells (DPCs) onto the scaffold. Methods: Five dogs were used in this study. Bilateral 4 mm${\times}$2 mm (depth${\times}$mesiodistal width), one-wall intrabony periodontal defects were surgically created on the distal side of the mandibular second premolar and the mesial side of the mandibular fourth premolar. In each dog, four of the defects were separately and randomly assigned to the following groups: the PDLCcultured scaffold transplantation group (PDLC group), the DPC-cultured scaffold transplantation group (DPC group), the normal saline-soaked scaffold transplantation group, and the control group. The animals were euthanized following an 8-week healing interval for clinical, scanning electron microscopy (SEM), and histologic evaluations. Results: There was no sign of inflammation or other clinical signs of postoperative complications. The examination of cellseeded constructs by SEM provided visual confirmation of the favorable characteristics of nHA-coated silk scaffolds for tissue engineering. The scaffolds exhibited a firm connective porous structure in cross section, and after PDLCs and DPCs were seeded onto the scaffolds and cultured for 3 weeks, the attachment of well-spread cells and the formation of extracellular matrix (ECM) were observed. The histologic analysis revealed that a well-maintained grafted volume was present at all experimental sites for 8 weeks. Small amounts of inflammatory cells were seen within the scaffolds. The PDLC and DPC groups did not have remarkably different histologic appearances. Conclusions: These observations indicate that nHA-coated silk scaffolds can be considered to be potentially useful biomaterials for periodontal regeneration.

• 치과방사선
• /
• 제15권1호
• /
• pp.75-83
• /
• 1985

Bitewing and periapical radiographic techniques are used in clinical and epidemiological studies to assess crestal alveolar bone levels. The purpose of the present study investigated relationships between these techniques by assessing alveolar crest location at the same site. Bitewing and periapical radiographs were available from posterior quadrants of 120 subjects. The distance from cemento-enamel junction to the alveolar crest (CEJ -CR) was measured for each proximal surface from the distal of the cuspid to the distal of the second molar. Data were arranged according to the proximal surface examined, and bitewing and periapical measurements were compared using paired tests. The obtained results were as follows; 1. In maxilla, a significant t ratio with a P value of 0.05 or less was reached for 78% and in mandible reached for 39%. 2. Pearson correlations were calculated 32 surfaces (89%) had values below 0.70 and so, data obtained by these techniques can not be used interchangeably on an individual or group basis. 3. In situations where the periapical measure was greater than the bitewing, it ranged up to 20.7% greater with a mean 9.8%. Where the bitewing was greater than periapical, it ranged up to 51. 9% greater, with a mean 18.2%. 4. The percentage difference was greater in maxillary posterior areas than in mandibular molar, premolar areas. A lower prevalence of significant differences was attributed to relatively more simple root and favorable radiographic conditions in mandibular molar and premolar areas. 5. The anatomical limitations imposed on periapical radiographic technique, most often result in somewhat foreshortened radiographic images. This situation would tend to be accentuated by the anatomical restrictions of the hard palate. 6. Consequently, since the significant differences frequently exist between measurements obtained from bitewing and periapical techniques, it is important to define which technique is used.

• The Journal of Advanced Prosthodontics
• /
• 제11권3호
• /
• pp.187-192
• /
• 2019

PURPOSE. The purpose of this in vitro study was to investigate the fracture loads and modes of failure for the full range of natural teeth under simulated occlusal loading. MATERIALS AND METHODS. One hundred and forty natural teeth were taken from mandibles and maxillas of patients. There were 14 groups of teeth with 10 teeth in each group (5 males and 5 females). Each specimen was embedded in resin and mounted on a positioning jig, with the long axis of the tooth at an inclined angle of 30 degrees. A universal testing machine was used to measure the compression load at which fracture of the tooth specimen occurred; loads were applied on the incisal edge and/or functional cusp. RESULTS. The mean fracture load for the mandibular first premolar was the highest (2002 N) of all the types of teeth, while the mean fracture load for the maxillary first premolar was the lowest (525 N). Mean fracture loads for the mandibular and maxillary incisors, and the first and second maxillary premolars, had significantly lower values compared to the other types of teeth. The mean fracture load for the teeth from males was significantly greater than that for the teeth from females. There was an inverse relationship between age and mean fracture load, in which older teeth had lower fracture loads compared to younger teeth. CONCLUSION. The mean fracture loads for natural teeth were significantly different, with dependence on tooth position and the sex and age of the individual.

• The Korean Journal of Legal Medicine
• /
• 제42권4호
• /
• pp.141-145
• /
• 2018

There have been many radiographic studies on age estimation that evaluate reduction in size of dental pulp cavity with secondary dentin formation. The Paewinsky method reported high accuracy in estimating ages by measuring the width of the pulp cavity in panoramic radiographs. The aim of this study was to evaluate the application of the Paewinsky method to digital periapical radiographs. This study was conducted on 103 cases that reported to the Section of Human Identification of the National Forensic Service. The age was calculated by applying the Paewinsky method that measures the root and pulp canal width at three points in a tooth. The estimation results were compared with those calculated by the Johanson method. When the Paewinsky models were applied to digital periapical radiographs, the errors were significantly greater as compared to the original study. The errors of the maxillary second premolar and mandibular lateral incisor were greater than those of the maxillary central incisor, lateral incisor, mandibular canine, and first premolar. Furthermore, errors of the age estimation models in level C were greater than those in levels A and B. This study could be a reference for the application of the Paewinsky method to digital periapical radiographs.

• 대한치과의사협회지
• /
• 제58권6호
• /
• pp.336-345
• /
• 2020

Peri-apical implant lesion, also known as 'retrograde peri-implantitis' can occur with multifactorial etiological factors. The purpose of this case report is to demonstrate resolution of periapical implant lesion by removal of causative factors and saving implant by regenerative therapy. A 54-year old male patient with mild dull pain around implant on the right mandibular second premolar area due to persistent peri-apical infection of the adjacent first premolar was treated. Extraction of tooth with symptomatic apical periodontitis and regenerative therapy on the buccal fenestration area of the implant and extraction site were performed. After 6-month reentry, notable regenerated bone tissue around implant was found, and implant placement on the previous extraction site was performed. After 14-month follow-up from the regenerative therapy, neither biological nor mechanical complication could be found around the implant, evidenced by high implant stability, normal clinical probing depth, and absence of discomfort spontaneously and during masticatory function. In conclusion, surgical intervention including regenerative therapy using bone graft and barrier membrane on periapical implant lesion can be suggested as one of the treatment options considering the extent of periapical lesion.

• 대한소아치과학회지
• /
• 제37권1호
• /
• pp.130-135
• /
• 2010

이소맹출은 치아가 비정상적인 위치로 맹출하는 경우를 말하며, 주로 상악 제1대구치, 하악 측절치, 상악 견치에서 발생하며 하악 제1대구치에서는 드물게 발생한다. 제1대구치의 이소맹출은 흔히 제2유구치의 비정상적인 치근흡수를 야기하며, 이를 방치하게 되면 제2유구치의 조기상실, 제1대구치의 근심경사 및 회전, 제2소구치의 맹출 공간 부족 및 교합문제 등을 야기하게 되므로 이소맹출로 진단될 경우 조기 치료가 추천된다. 이소맹출은 대개 통상적인 방사선검사를 통해 발견되나, 간혹 제2유구치의 치근흡수가 심할 경우 치수가 감염되어 동통을 야기하는 경우도 있다. 이소맹출의 치료는 제2유구치를 보존하면서 제1대구치의 맹출 방향을 바로 잡아 주는 것으로 크게 치간이개(interproximal wedging)와 원심경사이동(distal tipping)을 이용한 방법을 사용한다. 본 증례들은 하악 제1대구치의 이소맹출을 보이는 환아들로, Humphrey appliance와 Halterman appliance를 이용하여 양호한 치료 결과를 얻었기에 보고하는 바이다.

• Journal of Periodontal and Implant Science
• /
• 제28권4호
• /
• pp.785-797
• /
• 1998

This study has been done to prove that keratinized gingiva is required for the periodontal health and to analyse the adequate width that is necessary. Until now, the study on frenum has been documented on changing its location. But the location or the formation of the frenum has not been reported. This experiment has used 173 patients from the department of periodontology of Dankook University to investigate the width of keratinized gingiva, the formation of the frenum and its location for the frequency. This study also looks into the relationship between the gingival recession and the structure of the frenum, and affects they have on periodontal health. The width of the keratinized gingiva in the mandible has been found to be highest in the lateral incisor than in the central incisor. The width decreased from the canine to the first premolar until it reached the molar. The interproximal area of the mandibular frenum was 77.9%, which was greater than the frequency (22.1%) from the midline of the teeth. The highest frequency of frenum was at 30.6% in between the both central incisor then second greatest at 20.6% in between the right canine and the right first premolar. Frenum was not found in between the second premolar and the distal area. In the morphology of the frenum, it was found that 43.4% out of 551 parts were found to be a single narrow frenum, and the double or triple ligamented form of the complex frenum were found in similar frequency of 237 parts, but the broad frenum was rarely frequent. The incisal area was popular mostly with the single narrow frenum, the left premolar area frequented 57.4%, and the right premolar frequented 64.7%. Because the distance between the frenum apex and the gingival margin measured to be about 5mm or greater, the frenum apex started in the mucogingival junction and not just below the keratinized gingiva. In the 551 area investigated, 48.3% of gingiva showed recession, incisal area had recession the least at 44.9%, right buccal side at 47.4%, and right buccal side frequented the highest at 52.1%. The teeth that showed recession recessed at the average of 2.151.0.mm and the left canine showed the greatest amount of gingival recession. In the investigation to find out if the keratinized gingiva and the gingiva recession had mutually related somehow, the width of keratinized gingiva showed no affect on the probing depth, but had affected in the gingiva recession. This investigation showed that the gingival recession and the morphology of the frenum related in that, the single narrow frenum had recessed the least and the broad frenum recessed the most. With this analysis, a conclusion was drawn that the morphology of the frenum had affected in the gingical recession.