• 제목/요약/키워드: Mandibular ramus sagittal split osteotomy

검색결과 130건 처리시간 0.032초

하악전돌증에서 하악지 시상분할골절단 및 Screw고정후 골성회귀에 관한 연구 (SKELETAL RELAPSE AFTER SAGITTAL SPLIT RAMUS OSTEOTOMY AND SCREW FIXATION)

  • 이창국;김명래;최장우;윤정훈
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제18권4호
    • /
    • pp.563-569
    • /
    • 1996
  • Skeletal and dental changes were examined in 38 patients of mandibular prognathism who been treated by a bilateral sagittal split osteotomy(SSRO) and internal fixation using titanium mini-screws. All patients were followed up for over 8 months after the surgeries, and postoperative cephalometric measurements were compared at 2 months and at 8 months. Linear measurements of the "Pog-most posterior screws" and angular measurementsts of "SN-Pog'were compared to figure out the change of bony fragments. The significancy of data were tested by unpaired T-test. The results were as follows : 1. The fixation screws were changed in cephalometric position as little as $0.32{\pm}2.51mm$ in SSRO and $0.15{\pm}1.00mm$ in SSRO & Le Fort I Osteotomy.(P<0.05) 2. Mandibular set-back over 5mm resulted in less stability of the fixation screws and higher relapse tendency. 3. The internal fixation using two screws along the inferior border and one on the superior ridge is considered to be very resistant to postoperative relapse of the repositioned bony segments.

  • PDF

Enucleation of large keratocystic odontogenic tumor at mandible via unilateral sagittal split osteotomy: a report of three cases

  • Lee, Hyeong-Geun;Rhee, Seung-Hyun;Noh, Chung-Ah;Shin, Sang-Hun
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제41권4호
    • /
    • pp.208-212
    • /
    • 2015
  • Keratocystic odontogenic tumor (KCOT) is a common benign tumor of osseous lesions in dental and maxillofacial practice. We describe three cases of large KCOT located in the posterior part of the mandible extending to the angle and ramus region, which were enucleated via sagittal split osteotomy (SSO) of the mandible. There are cases in which a conventional enucleation procedure does not ensure complete excision of the entire lesion without damage to vital structures like the inferior alveolar nerve. In such cases, a SSO approach could be a better choice than conventional methods. The purpose of this article is to describe our experience using unilateral mandibular SSO for removal of a KCOT from the mandible.

Comparative study on long-term stability in mandibular sagittal split ramus osteotomy: hydroxyapatite/poly-ʟ-lactide mesh versus titanium miniplate

  • Park, Young-Wook;Kang, Hyun-Sik;Lee, Jang-Ha
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제41권
    • /
    • pp.8.1-8.6
    • /
    • 2019
  • Background: Resorbable devices have recently been adopted in the field of orthognathic surgery with controversies about their postoperative skeletal stability. Hence, we determined the long-term skeletal stability of unsintered hydroxyapatite/poly-ʟ-lactic acid (HA/PLLA) mesh for osteofixation of mandibular sagittal split ramus osteotomy (SSRO), and compared it with that of titanium miniplate. Methods: Patients were divided into resorbable mesh and titanium miniplate fixation groups. A comparative study of the change in the mandibular position was performed with preoperative, 1-day, 6-month, and 2-year postoperative lateral cephalograms. Results: At postoperative 6 months-compared with postoperative 1 day, point B (supra-mentale) was significantly displaced anteriorly in the titanium-fixation group. Moreover, at postoperative 2 years-compared with postoperative 6 months, point B was significantly displaced inferiorly in the titanium-fixation. However, the HA/PLLA mesh-fixation group did not show any significant change with respect to point B postoperatively. Conclusions: The HA/PLLA mesh-fixation group demonstrated superior long-term skeletal stability with respect to the position of mandible, when compared with the titanium-fixation group.

Correlation between Unfavorable Split in the Distal Segment during the Bilateral Sagittal Ramus Osteotomy and Skeletal Relapse: Cone-Beam Computed Tomography Study

  • Kim, Young-Hoon;Lee, Baeksoo;Kwon, Yong-Dae;Ohe, Joo-Young;Lee, Jung-Woo;Jung, Junho;Lee, Seok Mo;Choi, Byung-Joon
    • Journal of Korean Dental Science
    • /
    • 제14권2호
    • /
    • pp.110-117
    • /
    • 2021
  • Purpose: The purpose of this article is to study the relationship of unintentionally extended split in the distal segment during the bilateral sagittal split ramus osteotomy (BSSRO) and skeletal relapse. Materials and Methods: Twenty patients with mandibular prognathism were divided into two groups according to whether or not unintentionally extended split had occurred. Cone-beam computed tomography images were taken before surgery (T0), immediately after surgery (T1), and postoperatively at 6 months (T2). The stability was evaluated by measuring the change of Nasion perpendicular-Pogonion (N-Pog) distance. Result: Both groups showed mild advancement of Pog during follow-up. In both groups, the condyle head rotated inward and moved posterioinferiorly after surgery, but tended to return to their original position during follow-up. Conclusion: There was no statistically significant difference between the two groups in mandible position. Moreover, the condylar position was stable. If it is difficult to proceed reduction of the unintentionally extended split, careful inspection should be performed to prevent subsequent complications during follow-up.

하악전돌증에 있어서 전산화단층촬영을 이용한 하악지의 형태학적 평가 (MORPHOLOGICAL EVALUATION OF MANDIBULAR RAMUS IN MANDIBULAR PROGNATHISM BY COMPUTED TOMOGRAPHY)

  • 차두원;장지영;이상한
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제34권3호
    • /
    • pp.370-375
    • /
    • 2008
  • Sagittal split ramus osteotomy (SSRO) is widely used in treatment of dentofacial deformities. But, many complications can occur including unfavorable fractures during osteotomy. To prevent these complications, it is necessary to understand comprehensively the anatomy of the mandiular ramus. The purpose of this study was to evaluate the morphology of the madibular ramus in manibular prognathism patients by computed tomography comparing with normal control group. The study group consisted of 33 skeletal class III patients (20 males, 13 females) and the control group consisted of the 52 patients without dentofacial deformities (32 males, 20 females). The mean age of study group was 22.0-year old, and that of control group was 37.1-year. For the CT examination, following scan parameters was used: 1mm slice thickness, 0.5 second scan time, 120kV and 100mA/s. The axial scans of the head were made parallel to the mandibular occlusal plane. The anteroposterior length of the ramus, the distance from anterior border of the ramus to lingula, the relative distance from the anterior border of the ramus to lingula compared to the anteroposterior length of the ramus, the thickness of anterior and posterior cortical plate, the thickness of medial cortical plate of the ramus at lingula level, the thickness of cancellous bone of the ramus at lingula level were measured. The skeletal class III mandibular prognathism patients exhibited shorter anteroposterior length of the ramus, thicker anterior and posterior cortical plate, thinner mediolateral cancellous bone thickness. The lingula has a relative stable anteroposterior position in ramus in all groups. There was higher possibility of fusion of medial and lateral cortical plate at lingula level in the mandibular prognathism group. In conclusion, the mandibular prognathism patients have narrow rami with scanty cancellous bone, which means that careful preoperative examination including CT scan can prevent undesirable fractures during osteotomy.

하악전돌증 환자의 하악지 시상분할 골절단술에서 자가수혈의 유용성 (AVAILABILITY OF AUTOLOGOUS TRANSFUSION IN BILATERAL SAGITTAL SPLIT RAMUS OSTEOTOMY FOR MANDIBULAR PROGNATHISM)

  • 한상정;장주민;오한석;이해경;이정녀;이수운;박상준;김우형
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제33권5호
    • /
    • pp.524-529
    • /
    • 2007
  • Objective: Autologous transfusion is frequently used with orthognathic surgery. The necessity of autologous transfusion has begun to question alone in bilateral sagittal split ramus osteotomy. The aim of this study was to evaluate the availability of autologous transfusion. Methods: The chart reviews of sixty patients who had undergone bilateral sagittal ramus osteotomy were done. The subjects were divided into two groups: In experimental group, 30 patients who autodonated 320ml in the preoperative 3 weeks actually received a transfusion in the postoperative 6 hours were included. In control group, 30 patients who underwent the same operation without preoperative donation and any other transfusion were included. Hemoglobin, hematocrit, and changes of these values in both groups were evaluated. Results: 1. From postoperative 3 hours to postoperative 1 day, the increases of hemoglobin(0.8g/dL in experimental group, 0.2g/dL in control group) and hematocrit(0.3% in experimental group, 0.6% in control group) were not statistically significant between both groups. 2. From postoperative 1 day to postoperative 1 week, the increase of hemoglobin(0.6g/dL in experimental group, 0.3g/dL in control group) was not statistically significant between both groups. But the increase of hematocrit(2.5% in experimental group, 1.0% in control group) was statistically significant between both groups over the same period(hematocrit p=0.043). 3. On postoperative 1 week, the values of hemoglobin(12.3% in both groups) and hematocrit(35.6% in experimental group, 36.8% in control group) were not statistically significant between both groups. Conclusion: The autologous transfusion in surgery of just a little blood loss was not effective. The most results show that there is little availability of autologous transfusion according to changes of hemoglobin and hematocrit in bilateral sagittal split ramus osteotomy.

골격성 3급 부정교합 환자에서 양측 상행지 시상분할 골절단술을 이용한 하악 후방이동 시 이동량에 따른 회귀현상 (Evaluation of Relapse according to Set-back Degree of the Mandible at Bilateral Sagittal Split Ramus Osteotomy in Mandibular Prognathism Patients)

  • 유경환;김수관;문성용;오지수;김생곤;박진주;정종원;윤대웅;양성수
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제33권4호
    • /
    • pp.319-322
    • /
    • 2011
  • Purpose: The purpose of this study was to examine the appropriate degree of set-back of the mandible by evaluating the rate of relapse after surgery. Methods: Among the patients who visited our hospital from January 2002 to January 2007 and who underwent orthognathic surgery, of the patients available for follow-up observation, the rate of relapse after surgery was investigated according to the set-back degree. The patients were divided into groups by the degree of set-back, and relapse was evaluated by the radiographs performed the day after surgery, 6 months after surgery, 1 year after surgery, 2 years after surgery and 3 years after surgery. Results: In cases that exceeded the limit of posterior movement of the mandible (13 mm) or that had the wrong position of the condyle, a greater tendency toward relapse was shown. Conclusion: Based on the results of this study, among the cases that required a large amount of posterior movement of the mandible, two jaw surgeries accompanied by bilateral sagittal split ramus osteotomy (BSSRO) and LeFort I osteotomy are recommended.

Three-dimensional finite element analysis of the stress distribution and displacement in different fixation methods of bilateral sagittal split ramus osteotomy

  • Yun, Kyoung In;Cho, Young-Gyu;Lee, Jong-Min;Park, Yoon-Hee;Park, Myung-Kyun;Park, Je Uk
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제38권5호
    • /
    • pp.271-275
    • /
    • 2012
  • Objectives: This study evaluated a range of fixation methods to determine which is best for the postoperative stabilization of a mandibular osteotomy using three-dimensional finite element analysis of the stress distribution on the plate, screw and surrounding bone and displacement of the lower incisors. Materials and Methods: The model was generated using the synthetic skull scan data, and the surface model was changed to a solid model using software. Bilateral sagittal split ramus osteotomy was performed using the program, and 8 different types of fixation methods were evaluated. A vertical load of 10 N was applied to the occlusal surface of the first molar. Results: In the case of bicortical screws, von-Mises stress on the screws and screw hole and deflection of the lower central incisor were minimal in type 2 (inverted L pattern with 3 bicortical repositioning screws). In the case of plates, von-Mises stress was minimal in type 8 (fixation 5 mm above the inferior border of the mandible with 1 metal plate and 4 monocortical screws), and deflection of the lower central incisor was minimal in types 6 (fixation 5 mm below the superior border of the mandible with 1 metal plate and 4 monocortical screws) and 7 (fixation 12 mm below the superior border of the mandible with 1 metal plate and 4 monocortical screws). Conclusion: Types 2 and 6 fixation methods provide better stability than the others.

악교정 수술을 위한 한국인 하악지의 해부학적 위치에 관한 연구 (A STUDY OF MANDIBULAR ANATOMY FOR ORTHOGNATHIC SURGERY IN KOREANS)

  • 우순섭;조정연;박원희;유임학;이영수;심광섭
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제28권2호
    • /
    • pp.126-131
    • /
    • 2002
  • Anatomical shape of the mandibular ramus, which includes the area from the rear of the mandibular second molar to the mandibular posterior border and from the mandibular sigmoid notch to the inferior mandibular border, must be carefully considered to perform orthognathic surgery. The locations of the lingula and mandibular foramen in medial side of mandibular ramus are one of the most important factors to decide the location of the horizontal medial osteotomy in sagittal split ramus osteotomy and to select the line of vertical osteotomy in intraoral vertical ramus osteotomy. Sixty-five different Korean human dry mandibles were surveyed. All mandible have permanent dentition including complete eruption of the mandibular second molar. The locations of the lingula and mandibular foramen in medial side of the ramus were identified and following results were obtained. Anterior ramal horizontal distance from lingula was $16.13{\pm}3.53mm(range:8.6{\sim}24.3mm)$, anterior ramal horizontal distance from mandibular foramen was $23.91{\pm}4.79mm(range: 14.1{\sim}39.7mm)$, horizontal width of mandibular foramen was $2.79{\pm}0.95mm(range:1.5{\sim}6.1mm)$, height of lingula was $10.51{\pm}3.84mm(range:3.1{\sim}22.4mm)$, vertical distance from sigmoid notch to lingula was $19.82{\pm}5.11mm(range:9.1{\sim}35.3mm)$. From this study, the result could be used to select the location of osteotomy lines and to decide amount of periosteal elevation to avoid injury of neurovascular bundle, and to accomplish the appropriate split in Korean patients in mandibular orthognathic surgery.

Cone-beam computed tomographic evaluation of the condylar remodeling occurring after mandibular set-back by bilateral sagittal split ramus osteotomy and rigid fixation

  • Ha, Man-Hee;Kim, Yong-Il;Park, Soo-Byung;Kim, Seong-Sik;Son, Woo-Sung
    • 대한치과교정학회지
    • /
    • 제43권6호
    • /
    • pp.263-270
    • /
    • 2013
  • Objective: To evaluate condylar head remodeling after mandibular set-back sagittal split ramus osteotomy (SSRO) with rigid fixation in skeletal class III deformities. The correlation between condylar head remodeling and condylar axis changes was determined using cone-beam computed tomography (CBCT) superimposition. Methods: The CBCT data of 22 subjects (9 men and 13 women) who had undergone mandibular set-back SSRO with rigid fixation were analyzed. Changes in the condylar head measurements and the distribution of the signs of condylar head remodeling were evaluated by CBCT superimposition. Results: The subjects showed inward rotation of the axial condylar angle; reduced condylar heights on the sagittal and coronal planes; and resorptive remodeling in the anterior and superior areas on the sagittal plane, superior and lateral areas on the coronal plane, and anterior-middle and anterior-lateral areas on the axial plane (p < 0.05). Conclusions: The CBCT superimposition method showed condylar head remodeling after mandibular set-back SSRO with rigid fixation. In skeletal class III patients, SSRO with rigid fixation resulted in rotation, diminution, and remodeling of the condylar head. However, these changes did not produce clinical signs or symptoms of temporomandibular disorders.