• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.172-176
• /
• 2011

Surgical resection of the mandible due to presence of benign or malignant tumor is the most common cause of the mandibular deviation. Depending upon the location and extent of the tumor in the mandible, various surgical treatment modalities like marginal, segmental, hemi, subtotal, or total mandibulectomy can be performed. The clinicians must wait for extensive period of time for completion of healing and acceptance of the osseous graft before considering the definitive prosthesis. During this initial healing period prosthodontic intervention is required for preventing the mandibular deviation. This case report describes early prosthodontic management of a patient who has undergone a reconstructed hemi-mandibulectomy with modified mandibular guide flange prosthesis. The prosthesis helps patient moving the mandible normally without deviation during functions like speech and mastication.

• 대한치과보철학회지
• /
• 제51권4호
• /
• pp.347-352
• /
• 2013

혀는 정확한 근신경계의 조화에 의해 저작, 연하, 발음과 같은 복잡한 기능을 수행하는 데 중요한 역할을 한다. 악성종양으로 인해 구강 내 혀를 절제해야 하는 경우에 환자는 발음 및 연하에 큰 어려움을 겪게 된다. 이러한 환자에 있어 보철적 치료 목표는 저작, 연하 및 발음을 증진시키는 것이다. 보철적 수복 방법은 수술의 종류 및 범위에 의해 결정된다. 완전 혀 절제술(Total glossectomy)을 시행한 경우에는 하악-혀장치(mandibular tongue prosthesis)를 선택하며 악-혀장치(Mandibular tongue prosthesis)는 혀 보철물로 구강저를 채우는 것이다. 이렇게 형성한 혀 보철물은 음식이 식도로 넘어가는 입구(platform)를 형성해주고 발음을 향상시키며 하방의 연약한 이식 조직을 보호하고 외형 및 심리사회적으로 우수하다는 장점을 가진다. 본 증례에서는 완전 혀 절제술(total glossectomy)를 시행한 환자를 위해 보철적으로 수복하는 임상과정을 논의하고자 한다.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.338-360
• /
• 1992

This study was performed to investigate the phonetic alterations with upper anterior teeth were missing. To compare the changes of the phonations, before and after insertion of the temporary prosthesis, six subjects who lost their upper anterior teeth were selected (2-male, 4-female). Tested sounds (/ga(가), na(나), da(다), ra(라), sa(사), ja(자), cha(차), ta(타), pa(파), ha(하), gi(기), ni(니), di(디), ri(리), si(시), jl(지), chi(치), ti(티), pi(피), hi(히), seu(스), se(세), so(소), su(수)/were programmed into an IBM AT with and without temporary prosthesis. These experiments were analyzed by formants, consonants durations, and energy level changes with an LSI speech work station program. During the pronunciation of the tested sounds (with and without temporary prosthesis), mandibular movements were recorded to a Mandibular Kinesiogram and analyzed . The findings led to the following conclusions: 1. Objective differences could not be found. However, in every informant, subjective improvement could be noticed. 2. There were no persistant correlations of the formant's changes. And in every informant, phonetic changes were variable. 3. There were various changes of the consonant durations in every informant. By and large, those of /si(시), jl(지), chi(치), Pi(피), hi(히)/ were longer than other tested sounds. After insertion of the prosthesis, durations were shorter. Consonants with /i(ㅣ)/ were longer than with /a(ㅏ)/, with or without prosthesis. 4. With and without temporary prosthesis, mandibular movements were various in the frontal view. Mandibular movements showed lateral deviations, and mandibular positions with /si(시), ji(지), ti(티), seu(스), hi(히)/ were nearer to the mandibular rest position. 5. The kinds of temporary prosthesis and conditions of the missing teeth influenced every informant variously, so there were no correlation between informants. 6. Energy levels increased in all tested sounds with a fixed temporary prosthesis. And, there were no differences between before and after insertion of a removable temporary prosthesis. However, sibilant sounds, and consonants with /i(ㅣ)/ showed a little increased energy level.

• 대한치과의사협회지
• /
• 제53권6호
• /
• pp.402-410
• /
• 2015

The aims of occlusal adjustment are as follows: to eliminate occlusal interference, to redirect force generated during function to which is favorable for teeth, to improve mastication efficiency and simultaneously establish stable maximal intercuspation or centric occlusion. Also, it should permit mandible to move freely from all positions. The sequence of occlusal adjustment in natural teeth and fixed prosthesis shall be as follows: 1) Eliminate interference that prevent optimal intercuspation and recontouring adjustment 2) Establish maximal intercuspation 3) Eliminate interference in lateral mandibular movement 4) Eliminate interference in anterior mandibular movement 5) Refine occlusal relationships.

• 대한두개안면성형외과학회지
• /
• 제19권2호
• /
• pp.152-156
• /
• 2018

Mandibular defects lead to severe deformation and functional deficiency. Vascularized osteocutaneous tissue has been widely used to reconstruct the mandible. However, it is technically challenging to shape this type of grafts in such a manner that they resemble the configuration of the mandible. A 48-year-old female patient who underwent anterolateral thigh (ALT) flap coverage after a tongue cancer excision was diagnosed with a tumor recurrence during the follow-up. A wide excision mandibulectomy and mandibular reconstruction with an ALT flap and a titanium implant were performed. The prefabricated titanium implant was fixed to the condyle. Then, an ALT flap was harvested from the ipsilateral thigh and anastomosed. After confirming that the circulation of the flap was intact, the implant was fixed to the parasymphysis. On the radiograph taken after the surgery, the prosthesis was well positioned and overall facial shape was acceptable. There was no postoperative complication during the follow-up period, 1 year and 2 months. The prefabricated implant allows the restoration of facial symmetry without harvesting autologous bone and it is a safe and effective surgical option for mandibular reconstruction.

• Journal of Korean Dental Science
• /
• 제15권2호
• /
• pp.152-161
• /
• 2022

Mandibular implant overdenture is a good treatment option for complete edentulous patients with restoring removable prosthesis. Mandibular implant overdenture with two implants and locator attachments is widely used. It is tissue-supported overdenture that is made with the concept of conventional complete denture fabrication. There are two patients who provided impressions by open mouth technique and closed mouth technique in each case. In both cases, mandibular implant overdentures were restored with functionally and aesthetically satisfying results.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권6호
• /
• pp.444-449
• /
• 2003

Distraction osteogenesis is a biologic process in which new bone is formed between bone fragments being separated by a tractional force. This technique has the advantage of initiating new bone growth without bone transplantation and promoting the growth of soft tissue. Mandibular distraction osteogenesis has shown to be effective to treat congenital or acquired mandibular hypoplasias. On the basis of positive results with implant-supported prostheses, the use of implants in the distracted site can significantly help stabilize the prosthesis. We obtained good result in the patient with mandibular deficiency due to trauma, who have been reconstructed with distraction osteogenesis and implant. We report our experiences with literature view.

• The Journal of Advanced Prosthodontics
• /
• 제10권2호
• /
• pp.138-146
• /
• 2018

PURPOSE. The purpose of this study was to analyze the effects of the splinted implant prosthesis in a reconstructed mandible using three-dimensional finite element analysis. MATERIALS AND METHODS. Three-dimensional finite element models were generated from a patient's computed tomography data. The patient had undergone partial resection of the mandible that covered the area from the left canine to the right condyle. The mandible was reconstructed using a fibula bone graft and dental implants. The left mandibular premolars and molars remained intact. Three types of models were created. The implant-supported prosthesis was splinted and segmented into two or three pieces. Each of these models was further subcategorized into two situations to compare the stress distribution around normal teeth and implants. Oblique loading of 300 N was applied on both sides of the mandible unilaterally. The maximum von Mises stress and displacement of the models were analyzed. RESULTS. The stress distribution of the natural mandible was more uniform than that of the reconstructed fibula. When the loading was applied to the implant prosthesis of reconstructed fibula, stress was concentrated at the cortical bone around the neck of the implants. The three-piece prosthesis model showed less uniform stress distribution compared to the others. Displacement of the components was positively correlated with the distance from areas of muscle attachment. The three-piece prosthesis model showed the greatest displacement. CONCLUSION. The splinted implant prosthesis showed a more favorable stress distribution and less displacement than the separated models in the reconstructed mandible.

• 구강회복응용과학지
• /
• 제17권2호
• /
• pp.113-123
• /
• 2001

The success of complete denture prosthesis is to satisfy three basic requirements for the edentulous patient : maximum comfort, efficiency, and esthetic appearance. This can be achieved only if the dentures are both stable and retentive. When the residual alveolar ridge has resorbed significantly, stability and retention are more dependent on the correct position of the teeth and external surfaces of the denture. The stability and retention of the denture can be improved by locating the denture in the neutral zone and reproducing exact mandibular border movement for balanced occlusion. The neutral zone philosophy is based upon the concept that there exists a specific area where the musculature function will not unseat the denture in the mouth. In here, forces generated by the tongue are neutralized by the forces generated by the lips and cheeks. One of the simplest methods for recording border movements in three dimensions is to make stereographic record of condylar movement. Stereographs are made in the mouth during mandibular movement with intraoral clutches and central bearing point, and used in dictating the condylar movement on the articulator later by generating the condylar paths in doughy acrylic resin. Its procedure is simpler and more convenient than that of Pantograph. In this clinical report, we introduce the concept of neutral zone and stereograph in complete denture fabrication.

• 대한치과의사협회지
• /
• 제50권5호
• /
• pp.256-261
• /
• 2012

Temporomandibular joint (TMJ) prosthesis have been hesitated to use because of bitter memories about Proplast-Teflon interpositional TMJ implants. Many clinicians, however, are trying to use total TMJ prosthesis with getting continuous long-term follow-up results. Alloplastic total TMJ replacement have been applied to much more patients who have failed previous TMJ prostheses or TMJ implants, fibrous/bony ankylosis, severe osteoarthritis, degenerative joint disease, idiopathic condylar resorption, condyle loss by trauma or tumor resection, and other bony destructive diseases. Nowadays three types of total TMJ prosthesis are widely used. In this article, indications, types of prosthesis, safety and stability would be demonstrated with a case report.