• 제목/요약/키워드: Mandibular premolar

검색결과 365건 처리시간 0.032초

Openbite을 나타내는 성인의 치열 특성 및 그에 따른 골격적 특성 분석 (An analysis of the dental arch and skeletal characteristics in adult patients exhibiting open bite)

  • 이진우
    • 대한치과교정학회지
    • /
    • 제34권4호
    • /
    • pp.289-301
    • /
    • 2004
  • It is the purpose of this study to characterize oral symptoms and to comprehend the cause and the relapse possibility of patients with open bite. This case study examines the orthodontic treatment of a group of female patients with open bite and Angle's Class I malocclusion. A cephalograph of the patient was taken and tracing of the radiograph was completed. In addition to Bjork and Ricketts analysis, additional measurements of specific areas were taken. The occlusal plane was determined by drawing a line connecting the mesiobuccal cusp tip of the maxillary first molar and the incisal edge of the maxillary central incisors. Patients were divided into two groups depending on the relationship between the marginal ridge of the maxillayy first premolar and the drawn line. Those patients with marginal ridges above the occlusal plane were placed into Group 1, while Group 2 subjects exhibited marginal ridges lower than the occlusal plane. The common characteristics within each group and the characteristic differences between each group both prior to and after orthodontic treatment were examined, and finally, the functional oral volume of each patient was analyzed. The results of the case study were as follows: 1. An examination of the skeletal relationship and anatomical form for both Group 1 and 2 showed that all subjects exhibited hyperdivergent skeletal forms, but Group 2 subjects generally demonstrated underdevelopment of the mandible and a smaller articular angle, resulting in an anterior positioning tendency of the mandible. 2. An analysis of the maxillary arches of Group 1 subjects prior to and after orthodontic treatment showed that the antero-inferior direction had changed to an antero-superior directional tendency, while the maxillary arches of the Group 2 patients showed a trend from an antero-superior direction to an antero-inferior relationship. The mandibular arches in both groups showed a change to an antero-superior direction. 3. Functional space analysis showed that Group 2 patients exhibited a greater tendency of haying palatal planes that drop in a postero-inferior direction, resulting in a more severe open bite than their Group 1 counterparts. The results of this case study show that although patients belonging to either Group 1 or 2 exhibited few external differences in the appearance of open bite, an examination of the dental and skeletal relationships by analyzing patient cephalographs showed that patients presenting with flat maxillary occlusal planes exhibited more severe open bite relationships than patients with curved occlusal planes.

Repeated failure of implants at the same site: a retrospective clinical study

  • Kang, Dong-Woo;Kim, So-Hyun;Choi, Yong-Hoon;Kim, Young-Kyun
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제41권
    • /
    • pp.27.1-27.9
    • /
    • 2019
  • Background: Implants are becoming the first choice of rehabilitation for tooth loss. Even though they have a high success rate, failures still occur for many reasons. The objective of this study is to analyze the reasons for recurring failure at the same site and the results of re-implantation. Methods: Thirteen patients (11 males and 2 females, mean age 60 ± 9.9 years) who experienced implant surgery failure at the same site (same tooth extraction area) two or more times in the Department of Oral and Maxillofacial Surgery, Seoul National University Bundang Hospital, between 2004 and 2017 were selected. The medical records on a type, sites, diameter, and length of implants; time and estimated cause of failure; and radiographs were reviewed. Data were collected and analyzed retrospectively, and the current statuses were evaluated. Results: A total of 14 implants experienced failure in the same site more than two times. Twelve implants were placed in the maxilla, while 2 implants were placed in the mandible. The maxillary molar area was the most common site of failure (57.1%), followed by the mandibular molar, anterior maxilla, and premolar areas (14.3% each). The first failure occurred most commonly after prosthetic treatment (35.7%) with an average period of failure of 3.8 months after loading. Ten cases were treated as immediate re-implantation, while the other 4 were delayed reimplantation after an average of 3.9 months. The second failure occurred most commonly after prosthetic treatment (42.9%), with an average of 31 months after loading; during the healing period (42.9%); and during the ongoing prosthetic period (14.3%). In 3 cases (21.4%), the treatment plan was altered to an implant bridge, while the other 11 cases underwent another implant placement procedure (78.6%). Finally, a total of 9 implants (64.3%) survived, with an average functioning period of 60 months. Conclusions: Implants can fail repeatedly at the same site due to overloading, infection, and other unspecified reasons. The age and sex of the patient and the location of implant placement seem to be associated with recurring failure. Type of implant, bone augmentation, and bone materials used are less relevant.

임플랜트 Overdenture의 Bar설계에 따른 하악지지조직의 광탄성학적 응력분석 (PHOTOELASTIC STRESS ANALYSIS ON THE MANDIBLE CAUSED BY IMPLANT OVERDENTURE)

  • 강정민;방몽숙
    • 대한치과보철학회지
    • /
    • 제32권2호
    • /
    • pp.327-353
    • /
    • 1994
  • This study was performed to evaluate the effects of number and alignment of implant fixture and various bar designs on the retention of denture and the stress distribution. Six kinds of photoelastic mandibular models and nine kinds of overdenture specimens were designed. A unilateral vertical load was gradually applied on the right first molar to calculate the maximal dislodgement load of each specimen. A unilateral vertical load of 17 Kgf was applied on the right first molar and a vertical load of 10 Kgf was applied on the interincisal edge region. The stress pattern which developed in each photoelastic model was analyzed by the reflection polariscope. The results obtained were as follows: 1. The maximal dislodgement load reversely increased with the distance from the loading point to the implant fixture, while it linearly increased with that from the most posterior implant fixture to the mesial clip. The maximal dislodgement load also increased with the use of a cantilever bar. 2. Under the posterior vertical load, the stress to the supporting tissue of the denture base increased with the distance from the loading point to the implant future. The stress concentration on the apical area of the implant future reversely increased with the distance from the loading point to the implant future. 3. In the overdentures supported by two implant fixtures under the posterior vertical load. the specimen implanted on lateral incisor areas with a cantilever bar exhibited more favorable stress distribution than that without a cantilever bar. The specimen implanted on the canine areas without a cantilever bar, however, exhibited more favorable stress distribution. 4. In the overdentures supported by three implant fixtures. the specimen implanted ell the midline and canine areas exhibited more favorable stress distribution than that implanted oil the midline and the first premolar areas. 5. In the overdentures supported by four implant fixtures. the specimen implanted with two adjacent implant fixtures exhibited more favorable stress distribution than that implanted at equal distance under the posterior vertical load. 6. Under the anterior vertical load, the overdentures supported by three implant fixtures exhibited stress concentration on the supporting structure of the middle implant future. In overdentures supported by two or four implant futures, no significant difference was noted in stress distribution between the types of bars. These results indicate that the greater the number of implant fixtures, the better the stress distribution is. A favorable stress distribution may be obtained in the overdentures supported by two or three implant fixtures, if the location and the design of the bar are appropriate.

  • PDF

Accuracy of several implant bite registration techniques: an in-vitro pilot study

  • Park, Do-Hyun;Park, Ji-Man;Choi, Jae-Won;Kang, Eun-Sook;Bae, Eun-Bin;Jeon, Young-Chan;Jeong, Chang-Mo;Yun, Mi-Jung;Huh, Jung-Bo
    • The Journal of Advanced Prosthodontics
    • /
    • 제9권5호
    • /
    • pp.341-349
    • /
    • 2017
  • PURPOSE. This study evaluated the accuracies of different bite registration techniques for implant-fixed prostheses using three dimensional file analysis. MATERIALS AND METHODS. Implant fixtures were placed on the mandibular right second premolar, and the first and second molar in a polyurethane model. Aluwax (A), Pattern Resin (P), and Blu-Mousse (B) were used as the bite registration materials on the healing abutments (H) or temporary abutments (T). The groups were classified into HA, HP, HB, TA, TP, and TB according to each combination. The group using the bite impression coping was the BC group; impression taking and bite registration were performed simultaneously. After impression and bite taking, the scan bodies were connected to the lab analogs of the casts. These casts were scanned using a model scanner. The distances between two reference points in three-dimensional files were measured in each group. One-way ANOVA and Duncan's test were used at the 5% significance level. RESULTS. The smallest distance discrepancy was observed in the TB group using the temporary abutments. The Blu-Mousse and HP groups showed the largest distance discrepancy. The TB and BC groups showed a lower distance discrepancy than the HP group (P=.001), and there was no significant difference between the groups using the temporary abutments and healing abutments (P>.05). CONCLUSION. Although this study has limitations as an in-vitro investigation, the groups using the temporary abutments to hold the Blu-Mousse record and bite impression coping showed greater accuracy than the group using the healing abutments to hold the pattern resin record.

외상성 골낭의 치험례 (TRAUMATIC BONE CYST : A CASE REPORT)

  • 오민형;김대업;이광희
    • 대한소아치과학회지
    • /
    • 제32권1호
    • /
    • pp.18-25
    • /
    • 2005
  • 외상성 골낭(Traumatic Bone Cyst)은 상피이장이 없는 비치성낭으로 감염의 증거가 없으며 많은 액체가 내장되는 특징을 가지는 병소이다. 외상성 골낭은 자각증상이 없는 병소로 10대에서 20대 사이에 호발하며 주로 남자에서 호발한다. 병소는 방사선학적으로 조개껍질 모양의 명확한 경계를 가지며 방사선 투과상을 보인다. 병소는 해면골에 위치하며 간혹 치밀골을 팽창시키거나 비박화시킨다. 병소 주변의 치아는 생활력을 유지하는 특징이 있다. 일반적으로 외상성 골낭은 방사선학적, 임상적인 기준으로 진단을 내리게 된다. 외상성 골낭의 치료법은 일반적으로 외과적인 적출술과 소파술을 시행한다. 본 두 증례 중 첫 번째 증례에서 환아는 개인치과의원에서 치수치료 도중 방사선 사진에서 방사선 투과상이 발견되어 본원으로 의뢰되었으며 파노라마 방사선 사진촬영 결과 좌측 하악골에 명확한 경계를 보이는 방사선 투과상을 보였다. 두 번째 증례에서 환아는 치외치인 상악 우측 제2소구치의 농양을 동반한 종창을 주소로 내원하였다가 초진시 촬영한 파노라마 방사선 사진에서 우측 하악골에 명확한 경계의 방사선 투과상을 보였다. 두 증례 모두 임상적, 방사선학적 검사결과 외상성 골낭으로 진단받았다. 첫 번째 증례에서는 생활력을 상실한 인접치아의 치근단공에 과기구 조작을 시행하여 병소를 교통시킨 후 지속적인 세척을 시도하여 병소가 치유되는 양상을 보였고, 두 번째 증례에서는 아무런 처치 없이 지속적인 관찰결과 병소의 크기가 감소하는 양상을 보였다. 본 두 증례에서 외과적인 적출술과 소파술을 시행하지 않고 보존적인 처치를 하였음에도 병소가 치유양상을 보이기에 보고하는 바이다.

  • PDF

비발치로 치료된 I 급 부정교합의 형태적 특성 (THE MORPHOLOGIC CHARACTERISTICS OF CLASS I, NON-EXTRACTION PATIENTS)

  • 장영일;신수정
    • 대한치과교정학회지
    • /
    • 제28권3호
    • /
    • pp.343-351
    • /
    • 1998
  • 본 연구는 비발치로 치료된 I급 부정교합 환자의 형태적 특성을 알아보고자 시행하였다. 비발치로 치료된 I급 부정교합 환자의 치료전과 치료후 안면형태를 평가하고 이를 교정치료를 받지 않은 정상군과 4개의 제 1소구치를 발거하고 치료한 I 급 부정교합 환자군과 비교하였다. Edgewise appliance와 MEAW를 사용하여 비발치로 치료한 환자로 치료후 비교적 양호한 안모와 교합을 갖는 환자 22명을 대상으로 하였다. 이들의 평균 연령은 14.7세 였고 평균 치료기간은 2.6년이었다 치료전과 치료후의 두부계측방사선 사진에서 32개의 계측점을 사용하여 24항목의 각도와 거리를 측정하였다. Student t-test를 시행하여 비발치군의 치료전과 치료후의 변화, 비발치군과 정상군의 차이, 그리고 비발치군과 발치군의 차이를 비교한 결과($p{\leq}0.05$), 다음의 결론을 얻었다. 1. 비발치로 치료한 I 급 부정교합 환자의 치료전 ODI는 $69.9^{\circ}$, APDI는 $82.1^{\circ}$, CF는$152^{\circ}$, EI는 $152^{\circ}$ 였다. 2. 비발치군의 골격형태는 정상군과 유사하였으나 정상군보다 큰 절치간각을 보였다. 3. 발치군은 비발치군보다 돌출된 안모와 작은 절치간각, 그리고 낮은 EI를 가지고 있었다. 4. 비발치군의 치료전,후 골격형태에는 큰 변화가 없었으나 치료후 상,하악 구치의 직립과 절치간각의 감소를 나타내었다.

  • PDF

섬유성 강화 컴포지트를 사용한 임플랜트 고정성 보철물의 굴곡강도 (FLEXURAL STRENGTH OF IMPLANT FIXED PROSTHESIS USING FIBER REINFORCED COMPOSITE)

  • 강경희;권긍록;이성복;최대균
    • 대한치과보철학회지
    • /
    • 제44권5호
    • /
    • pp.526-536
    • /
    • 2006
  • Statement of problem : Use of fiber composite technology as well as development of nonmetal implant prosthesis solved many problems due to metal alloy substructure such as corrosion. toxicity, difficult casting, expensiveness and esthetic limit. After clinical and laboratory test, we could find out that fiber-reinforced composite prostheses have good mechanical properties and FRC can make metal-free implant prostheses successful. Purpose : The purpose of this study is to evaluate the flexural strength of implant fixed prosthesis using fiber reinforced composite. Material and methods : 2-implant fixture were placed in second premolar and second molar area in edentulous mandibular model, and their abutments were placed, and bridge prostheses using gold, PFG, Tescera, and Targis Vectris were fabricated. Tescera was made in 5 different designs with different supplements. Group I was composed by 3 bars with diameter 1.0mm and 5 meshes, 2 bars and 5 meshes for Group II, 1 bar and 5 meshes for Group III, and only 5 meshes were used for Group IV. And Group V is composed by only 3 bars. Resin (Tescera) facing was made to buccal part of pontic of gold bridge. All of gold and PFG bridges were made on one model, 5 Targis Vectris bridges were also made on one model, and 25 Tescera bridges were. made on 3 models. Each bridge was attached to the test model by temporary cement and shallow depression was formed near central fossa of the bridge pontic to let 5 mm metal ball not move. Flexual strength was marked in graph by INSTRON. Results : The results of the study are as follows. The initial crack strength was the highest on PFG. and in order of gold bridge Tescera I, Tescera II, Targis vectris, Tescera IV, Tescera III, and Tescera V. The maximum strength was the highest on gold bridge, and in order of PFG, Tescera I, Tescera IV Tescera II, Targis vectris, Tescera III, and Tescera V. Conculsions : The following conclusions were drawn from the results of this study. 1. Flextural strength of implant prosthesis using fiber reinforced composite was higher than average posterior occlusal force. 2. In initial crack strength, Tescera I was stronger than Tescera V, and weaker than PFG. 3. Kinds and number of auxillary components had an effect on maximum strength, and maximum strength was increased as number of auxillary components increased. 4 Maximum strength of Tescera I was higher than Targis vectris, and lower than PFG.

Formocresol pulpotomy와 연관된 함치성 낭종의 치험례 (DENTIGEROUS CYST ASSOCIATED WITH FORMOCRESOL PULPOTOMY)

  • 주태준;박호원;이주현;서현우
    • 대한소아치과학회지
    • /
    • 제36권3호
    • /
    • pp.481-488
    • /
    • 2009
  • 1904년 Buckley에 의해 치근관 살균제로 도입된 이후로 1:5로 희석된 formocresol을 사용한 치수절단술이 치아우식에 의한 유치의 비가역적 치수염시에 가장 많이 사용되어 왔다. Formocresol은 치수조직의 높은 고정능력으로 높은 임상적 성공률을 보이고 있으나 자체독성이 매우 강하여 영구 계승치 치배의 변위나 결손, 법랑질 형성 부전, 전신흡수로 인한 돌연변이 가능성과 암유발 가능성 역시 보고되고 있다. 또한 formocresol을 사용한 치수절단술 후에 과사용된 formocresol에 의한 만성적인 염증이 계승 영구치로 확산되어 퇴축법랑상피의 증식을 자극하고 법랑질로부터 퇴축법랑상피를 분리시켜 함치성 낭종을 형성할 수 있음이 보고되고 있다. 본 증례는 3년 전 응급으로 하악 좌측 제 2유구치의 formocresol을 사용한 치수절단술 후 정기 검진을 위해 내원한 환자의 방사선 사진에서 함치성 낭종이 발견되어 낭종 제거와 함께 유치의 발치를 시행했고 발치된 유치에서 formocresol cotton pellet이 제거되지 않은 채로 발견되어 formocresol이 장기간 남아있음으로 인해 낭종을 형성할 수 있음을 보고하는 바이다.

  • PDF

하악편측치아의 결손에 따른 악관절의 조직반응에 대한 연구 (AN EXPERIMENTAL STUDY ON THE TISSUE RESPONSE OF THE TEMPOROMANDIBULAR JOINT IN UNILATERAL MANDIBULAR EDENTULISM)

  • 백희선;김영수
    • 대한치과보철학회지
    • /
    • 제29권2호
    • /
    • pp.285-294
    • /
    • 1991
  • The human temporomandibular joint as a ginglymoarthrodial one has much in common with the other synovial joints of the body, but it does possess an unique charachteristic in that it must accomodate the various occlusal relations of dentition during an end point of closure. For that reason, the movement of the condyle in the temporomandibular joint is susceptible to influences from the nature of occlusion. Undue loading to the temporomandibular joint can be applied on the occasion of premature contacts in centric relation, balancing side interferences, change of occlusal surfaces due to excessive attrition, loss of tooth. Such occlusal disharmonies in association with the systemic and emotional factors may give rise to the temporomandibular disorder. On the other hand, the changes of occlusal patterns in the growing body can also have an effect on the growth of the temporomandibular joint through the alterations of functional stresses. The purpose of this study was to observe histopathologic response of the temporomandibular joint in unilateral chewing on one side exclusively for 10 months. Three dogs showing normal masticatory function were chosen. One dog aged about 12 months was for control, two dogs for experimental specimens were about 12 and 18 months old respectively. For chewing on the left side only, unilateral lower right premolar and molar were extracted in two experimental specimens. And then three dogs were sacrificed 10 months later. Frontal histologic sectioning of joints were done for the observation of the effects of one-side chewing. 24 specimens from three dogs were obtained and fixed in 10% formalin and routinly processed with H-E staining for histologic examination. The light microscopic findings were interpretated as follows: 1. Experimental specimen 1 aged about 22 months: In comparison with control and right non-chewing side, the proliferative and hypertrophic zone were increased at the mesial and lateral part of left chewing side condyle. There was no change of the articular tissue of temporal bone. 2. Experimental specimen 2 aged about 28 months: The articular tissues of adult joint were observed. The differences between the chewing and non-chewing side were not seen in the articular tissues of condyle and temporal bone.

  • PDF

성견 2급 치근이개부 병변 치료시 이종골 이식 및 혈소판 농축 혈장의 골재생에 관한 효과 (The Effect of Platelet Rich Plasma Combined with Bovine Bone on the Treatment of Grade II Furcation Defects in Beagle Dogs)

  • 임성빈;이광수;박영채;유형근;신형식
    • Journal of Periodontal and Implant Science
    • /
    • 제30권2호
    • /
    • pp.257-277
    • /
    • 2000
  • New techniques for regenerating the destructed periodontal tissue have been studied for many years. Current acceptable methods of promoting periodontal regeneration are basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, and biological mediators. Platelet Rich Plasma has been reported as a biological mediator which regulates activities of wound healing progress including cell proliferation, migration, and metabolism. The purpose of this study is to evaluate the effects of using the Platelet Rich Plasma as a regeneration promoting agent for furcation involvement defect. Five adult beagle dogs were used in this experiment. The dogs were anesthetized with Ketamin HCl(0.1 ml/kg, IV)and Xylazine hydrochloride($Rompun^{(R)}$, Bayer, 0.1 ml/kg, IM) and conventional periodontal prophylaxis were performed with ultrasonic scaler and hand instruments. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on mandibular third(P3), forth(P4) and fifth(P5) premolar, and stopping was inserted. After 4 weeks, stopping was removed, and bone graft was performed. Ca-P was grafted in P3(experimental group I), Combination of Ca-P and plasma rich platelet were grafted in P4(experimental group II), and P5 was remained at control group.Systemic antibiotics(gentamicin sulfate)and anlgesics(phenyl butazone) were administrated intramuscular for 2 weeks after surgery. Irrigation with 0.1% Chlorhexidine Gluconate around operate sites was performed during the whole experimental period except one day immediate after surgery. Soft diets were fed through the whole experiment period. After 4, 8 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. At 4 weeks after surgery, there were rapid osteogenesis phenomenon on the defected area of the Platelet Rich Plasma plus Ca-P BBP group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 8 weeks after surgery. In conclusion, Platelet Rich Plasma can promote rapid osteogenesis during healing of periodontalregeneration.

  • PDF