• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권3호
• /
• pp.152-159
• /
• 2017

Objectives: The aim of this study was to investigate the effects of advancement magnitude and changes in mandibular plane angle on the stability of mandibular advancement. Materials and Methods: This retrospective cohort study evaluated the postoperative stability of mandibular advancement in class II skeletal subjects who underwent bilateral sagittal split osteotomy. Radiographs taken preoperatively, immediately postoperatively and 1 year postoperatively were traced and analyzed using linear and angular measurements. To determine horizontal and vertical relapse, an X-Y coordinate system was established in which the X-axis was constructed by rotating S-N downward by $7^{\circ}$ (approximation of the Frankfort horizontal plane) and the Y-axis was defined as a line perpendicular to the X-axis and passing through the point Sella. For certain reference points including point A, point B, pogonion and menton, the perpendicular distance between each point and both axes was determined and cephalometric variables were recorded as X and Y coordinates. Results: Twenty-five subjects were studied. A significant correlation between the amount of mandibular advancement and relapse in the B point (vertical and horizontal) and the pogonion point was observed (vertical and horizontal, P<0.001). Evaluation of data demonstrated a positive correlation between the mandibular plane angle (SN/ML) change and vertical relapse in the B point (P<0.05). A simple regression model demonstrated that 74% of horizontal relapse and 42.3% of vertical relapse in the B point was related to the amount of mandibular advancement. The receiver operating characteristic test showed that 8.5 mm mandibular advancement is related to a relapse rate of 1 mm or more in the pogonion, vertically or horizontally. Conclusion: The magnitude of mandibular advancement is a stronger surgical predictor for horizontal rather than vertical relapse at the B point. Changes in mandibular plane angle (SN/ML) during surgery affect vertical, but not horizontal relapse at the B point.

• 대한치과교정학회지
• /
• 제28권2호
• /
• pp.175-187
• /
• 1998

본 연구는 치료후 빈번한 재발로 인해 치료에 어려움을 겪는 III급 부정교합의 치료후 예후를 예측하는 데 도움을 주고자, 교정치료후 관찰기간동안 측모와 교합이 양호한 상태로 유지된 안정군(Stable group, n=12)과 그렇지 않고 재발의 경향을 보인 재발군(Relapse group, n=13)으로 나누고, 초진시 계측항목을 이용한 t-test, 상관분석 그리고 판별분석을 시행한 결과 다음과 같은 결론을 얻었다. 1. 상하악골의 전후방적인 위치와 관계를 나타내는 항목인 SNA, SNB, ANB, Angle of convexity 그리고 APDI에서 두 군간 통계학적으로 유의성 있는 차이를 보여주지 않아(p>0.05) 두 군간 전후방적 인 골격 형태에 있어서는 차이가 나지 않음을 알 수 있었다. 2. 교합평면의 경사도와 관련된 항목인 Wits, AB to Occlusal plane angle 그리고 Occlusal plane to Mandibular Plane angle에서 두 군간 통계학적으로 유의성 있는 차이를 보여(p<0.05)재발군의 교합평면이 안정군에 비해 전하방으로 많이 경사져 있음을 알 수 있었다. 3. 상하치열관계를 나타내는 항목인 Overjet에서 안정군이 재발군에 비해 절대치로 더 커(p<0.01) 전후방 골격부조화에 의한 것이 아닐 경우 치열의 전후방부조화가 클수록 치료후 예후가 좋음을 알 수 있었다. 4. 상관분석결과 Overjet과 Occlusal plane to Mandibular plane angle만이 통계학적으로 유의성 있는 상관관계를 보여 주었다(p<0.001, p<0.01). 5. 판별에 기여도가 높은 3항목 즉 Overjet, AB to Occlusal paine angle 그리고 Articular angle을 이용한 판별식을 도출하였으며, 이를 이용할 때 본 연구에 사용한 표본의 88%를 올바르게 판별할 수 있었다.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.

• Imaging Science in Dentistry
• /
• 제36권1호
• /
• pp.55-62
• /
• 2006

Purpose : To find the cause of root curvature by use of panoramic and lateral cephalometric radiograph. Materials and Methods : Twenty six 1st graders whose mandibular 1st molars .just emerged into the mouth were selected. Panoramic and lateral cephalometric radiograph were taken at grade 1 and 6, longitudinally. In cephalometric radio graph, mandibular plane angle, ramus-occlusal plane angle, gonial angle, and gonion-gnathion distance (Go-Gn distance) were measured. In panoramic radio graph, elongated root length and root angle were measured by means of digital subtraction radiography. Occlusal plane-tooth axis angle was measured, too. Pearson correlations were used to evaluate the relationships between root curvature and elongated length and longitudinal variations of all variables. Multiple regression equation using related variables was computed. Results : The Pearson correlation coefficient between curved angle and longitudinal variations of occlusal plane-tooth axis angle and ramus-occlusal plane angle was 0.350 and 0.401, respectively (p<0.05). There was no significant correlation between elongated root length and longitudinal variations of all variables. The resulting regression equation was $Y=10.209+0.208X_1+0.745X_2$ (Y: root angle, $X_1$: variation of occlusal plane-tooth axis angle, $X_2$: variation of ramus-occlusal plane angle). Conclusion : It was suspected that the reasons of root curvature were change of tooth axis caused by contact with 2nd deciduous tooth and amount of mesial and superior movement related to change of occlusal plane.

• 대한치과교정학회지
• /
• 제29권1호
• /
• pp.113-127
• /
• 1999

악골의 골격적 부조화를 가진 환자의 교정치료는 악교정 수술을 필요로 하고, 악교정 수술에 의해 교합평면각은 변화된다. 특히 전치부 개교를 동반한 III급 부정교합 환자에서 치아안면 기형을 치료하기 위한 교합평면각의 변화에 대하여 많은 논란이 있어 왔다. 교합평면각을 증가시키는 하악골의 시계 방향 회전(clockwise rotation)은 전치부 개교에 대한 적절한 치료법으로 추천되어 왔고 하악골의 반시계 방향의 회전(counterclockwise rotation)은 하악지 고경을 증가시키는 방향으로 하악골을 회전시킨다는 개념으로 인해 재발(relapse)을 유발하는 불안정한 수술 방법으로 인식되어 왔다. 본 연구는 전치부 개교를 동반한 골격성 III 부정교합 환자에서 교합평면의 반시계 방향 회전을 동반한 하악지 시상분할 골절단술 시행 후 교합평면각의 변화와 술후 안정성과의 관계를 평가 하고자 하였다. 하악지 시상분할 골절 단술과 rigid fixation으로 치료받은 환자 25 명 (평균연령 20.6세)을 대상으로 하여 수술 직전(T1), 술후 2주내(T2), 그리고 술후 6 개월 이후(T3)에 촬영한 측모 두부계측 방사선 사진을 통계분석한 결과(Paired t-test, Pearson correlation analysis), 다음의 결론을 얻었다. 1. 악교정 수술 후(T2) 하악평면각은 $2.9^{\circ}$ 감소하였고 SN 평면에 대한 하악 교합평면의 각도는 $2.7^{\circ}$ 감소하였다. 술후 6 개월경과 후(T3) 후안면 고경의 감소로 인해(P<0.01) 하악 평면각은 $1.0^{\circ}$ 증가하였으나 하악 교합평면의 경사도는 변화되지 않았다. 2. 악교정 수술 후 시간 경과(T3)에 의해 발생한 수평적 재발은 하악골의 전방 이동량이 B점에서 1.6 mm로 수술시 전체 후방 이동량의 약$22\%$였다. 전안면 고경에서는 수직적 재발이 발생하지 않았으나,후안면 고경은 감소하였다. (P<0.01). 3. 수평적 재발과 상관관계를 보이는 항목은 하악평면각 이었고(P<0.01) 수술 6 개월경과 후 후안면 고경의 감소와 상관관계가 있는 요소로는 수술시 하악골의 후방 이동량(P<0.01), 하악지 고경의 증가량(P<0.01), 그리고 하악평면각의 감소량(P<0.01) 등이 있었다. 4. 수술시 하악 교합평면 경사도의 변화량과 술후 재발과는 상관관계가 없었다.

• 대한치과의사협회지
• /
• 제21권12호통권175호
• /
• pp.985-990
• /
• 1983

320 cephalometric roentgenograms of 25 boys and 15 girls which was longitudinally taken from the age 6.5 to 13.5 have been analyzed to access the angular growth changes of the mandible. The statistical analysis of the results allowed the following conclusions. 1. Gonial angle was reduced with ageing. 2. Chin angle was reduced with ageing. 3. Occlusal plane to mandibular plane angle was relatively stable. 4. Lower incisor to occlusal plane angle was reduced and showed the greatest variability.

• Journal of Yeungnam Medical Science
• /
• 제8권1호
• /
• pp.32-41
• /
• 1991

비호흡 장애 아동에서 인두편도의 절제가 치조안면골격에 미치는 영향을 연구하기 위해 비호흡 장애 아동 24명의 인두편도 절제전과 절제 1년후의 두부방사선 계측사진과 정상교합 아동의 1년전과 후의 두부방사선 계측사진을 비교분석함으로 다음과 같은 결과를 얻었다. 1. Cranial base variables 두 group간에 유의차가 나타나지 않았다. 2. Craniofacial variables 실험군에서 1년간 성장경향을 보면 Brachyfacial pattern으로 변했지만 대조군에서의 변화는 특정한 경향이 발견되지 않았다. 3. Maxillary variables 실험군에서 1년간 palatal plane의 경사가 평탄해졌고 그 외의 항목에서는 유의차가 발견되지 않았다. 4. Mandibular variables 두 group간에 1년간 성장량의 유의치는 mandibular plane angle과 gonial angle에서 나타났고 특히 실험군에서 감소가 일어났다. 5. Facial height variables 실험군에서 1년간 성장 변화가 하악골의 수평성장회전을 일으켰다. 전항목에서 통계적인 유의차를 나타냈다.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.205-227
• /
• 1992

This study was aimed to investigate the characteristics & the causative areas of the adult skeletal class III malocclusions with different facial divergency. The lateral cephalograms of 80 subjects with skeletal class III malocclusion from 17 to 29 years of age were classified into 3 groups according to SN-MP angle; hypodivergent group $(21.65{\pm}3.52^{\circ})$, neutrodivergent group $(30.50{\pm}2.29^{\circ})$ and hyperdivergent group $(40.02{\pm}3.98^{\circ})$. The data were gathered by digitizing of the traced cephalograms and were statistically analyzed. The results were as follows: 1. The anterior cranial base of the hyperdivergent group was shortest & tipped upwardly to the FH plane. 2. The maxilla of hyperdivergent group was shortest anteroposteriorly and positioned posteriorly to the anterior cranial base. 3. The degree of the mandibular prognathism in hyperdivergent group was less than the hypodivergent group. The hyperdivergent group showed the downward & backward rotated mandible. 4. The mandibular ramus & body was short & slender in the hyperdivergent group and the gonial angle was greatest in the hyperdivergent group. 5. The temporomandibular joint was positioned more superiorly to the anterior cranial base in the hyperdivergent group. 6. The cranial base, palatal plane, occlusal plane and mandibular plane were diverged in the hyperdivergent group. And this group had a great anterior total facial height, especially anterior lower facial height. 7. The craniofacial characteristics of skeletal class III malocclusion were critical in the vertical structure than the horizontal.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.394-410
• /
• 1993

This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권6호
• /
• pp.505-511
• /
• 2011

Purpose: This study evaluated correlation and risk factors between position of the mandibular third molars and mandibular angle fractures using clinical and radiographic findings. Methods: Medical records and panoramic radiographs of 188 patients with mandibular fractures were retrospectively reviewed. The presence and position of the third molars were assessed for each patient and were related to the occurrence of mandibular angle fractures. Results: The incidence of mandibular angle fracture was found to be greater when a lower third molar was present, particularly at the occlusal plane positioned on the $2^{nd}$ molar occlusal surface (by Archer system) and the third molar is impacted in mandibular ramus (by Pell & Gregory system). Of the 192 sites with a lower third molar, 32 (16%) had an angle fracture. Of the 184 site without lower third molars, 16 (8%) had an angle fracture. Conclusion: This study confirmed an increased risk of angle fractures in the presence of a lower third molar as well as variable risk for angle fracture, depending on positioning of the third molar.