• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.2
• /
• pp.182-186
• /
• 2007

A cyst is a pathologic lesion characterized by a cavity filled with fluid, celluar products, air, or a combination of these. Dentigerous cysts were formed around the crown of unerupted teeth. The reduced enamel epithelium persists around the crown after it has formed. Proliferation of the epithelium in a fluid-filled sac may be induced by osmotic pressure. In the first decade the most frequent location is the premolar site. In each subsequent decade the largest number of cysts are in the mandibular third molar site, with the second most frequent site being the maxillary canine. The treatment of odontogenic cyst can be mostly classified into three types of cyst enucleation, marsupialization and decompression. We should consider age of patient, anatomic structure, location and size for choosing a treatment method. Advantage of cyst enucleation is fast healing, but a injury of a surrounding structure is highly. Marsupialization is conservative treatment that can reduce the damage of a adjacent structure, but it is only limited at superficial lesion. Decompression also is conservative treatment, but it has the difficulty of the oral hygiene and the troublesome of the lavage. We present the possibility that reduces the defect of decompression and cures the lesion efficiently. We report a male patient with the dentigerous cyst developed at left mandibular third molar in this study. We used the decompression for a treatment and created special appliance to treat the lesion efficiently. We report a case of the cyst treatment that is association with efficiency of decompression appliance.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.127-133
• /
• 1988

Two patients, sought treatment for chief complaints of protruding frontal tooth and desired treatment to reduce the prominance of lips, were diagnosed as bimaxillary protrusion via clinical and cephalometric analysis. The authors corrected them by combined surgical and orthodonic treatment. As pre-surgical survey, paper and cast surgery were performed and wafer and resin sprint were constructed. We performed anterior maxillary and mandibular osteotomies in first premolar site to retract the maxillary and mandibular dentoalveolar segment in order to ; 1) decrease prominance of upper and lower lips. 2) create proper lower incisor intrusion. By use of intrtamaxillary fixation, prompt oral intake was possible. We made good result of esthetic improvement and there was no evidence of relapse and any complication.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.10-14
• /
• 2003

Myofibroma is a rare spindle cell neoplasm that consists of myofibroblsasts. Although it was originally described as a multicentric tumor process affecting infants and young children, it is now recognized that most cases of the tumor are soliatary and that it can occur at any age. This case is a myofibroma involving the right mandibular body in a 9-year-old boy. Radiographic examination revealed a relatively well-demarcated radiolucent lesion surrounding the impacted right mandibular canine and first premolar crown. The histologic sections composed of interlacing bundles of spindle cells with tapered or blunt-ended nuclei admixed with a foci of hemangiopericytoma-like appearance. Immunohistochemical staining demonstrated a positive reaction to vimentin and smooth muscle actin, but they are negative for desmin and S-100. The presence of well circumscribed radiolucent solid lesion in children as observed in this case, differential diagnosis of myofibroma must be included. In this case, there was no recurrence 6 months after enucleation and eruption guide of the impacted tooth is ongoing now.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.290-297
• /
• 2008

STATEMENT OF PROBLEM: Implant-supported fixed cantilever prostheses are influenced by various biomechanical factors. The information that shows the effect of implant number and position of cantilever on stress in the supporting bone is limited. PURPOSE: The purpose of this study was to investigate the effect of implant number variation and the effect of 2 different cantilever types on stress distribution in the supporting bone, using 3-dimensional finite element analysis. MATERIAL AND METHODS: A 3-D FE model of a mandibular section of bone with a missing second premolar, first molar, and second molar was developed. $4.1{\times}10$ mm screw-type dental implant was selected. 4.0 mm height solid abutments were fixed over all implant fixtures. Type III gold alloy was selected for implant-supported fixed prostheses. For mesial cantilever test, model 1-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 1-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 1-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with mesial cantilever were simulated. And then, 155N oblique force was applied to the buccal cusp of second premolar. For distal cantilever test, model 2-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 2-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 2-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with distal cantilever were simulated. And then, 206N oblique force was applied to the buccal cusp of second premolar. The implant and superstructure were simulated in finite element software(Pro/Engineer wildfire 2.0). The stress values were observed with the maximum von Mises stresses. RESULTS: Among the models without a cantilever, model 1-1 and 2-1 which had three implants, showed lower stress than model 1-2 and 2-2 which had two implants. Although model 2-1 was applied with 206N, it showed lower stress than model 1-2 which was applied with 155N. In models that implant positions of models were same, the amount of applied occlusal load largely influenced the maximum von Mises stress. Model 1-1, 1-2 and 1-3, which were loaded with 155N, showed less stress than corresponding model 2-1, 2-2 and 2- 3 which were loaded with 206N. For the same number of implants, the existence of a cantilever induced the obvious increase of maximum stress. Model 1-3 and 2-3 which had a cantilever, showed much higher stress than the others which had no cantilever. In all models, the von Mises stresses were concentrated at the cortical bone around the cervical region of the implants. Meanwhile, in model 1-1, 1-2 and 1-3, which were loaded on second premolar position, the first premolar participated in stress distribution. First premolars of model 2-1, 2-2 and 2-3 did not participate in stress distribution. CONCLUSION: 1. The more implants supported, the less stress was induced, regardless of applied occlusal loads. 2. The maximum von Mises stress in the bone of the implant-supported three unit fixed dental prosthesis with a mesial cantilever was 1.38 times that with a central pontic. The maximum von Mises stress in the bone of the implant-supported three-unit fixed dental prosthesis with a distal cantilever was 1.59 times that with a central pontic. 3. A distal cantilever induced larger stress in the bone than a mesial cantilever. 4. A adjacent tooth which contacts implant-supported fixed prosthesis participated in the stress distribution.

• The korean journal of orthodontics
• /
• v.26 no.6
• /
• pp.657-666
• /
• 1996

Orthopantomogram is commonly used to evaluate root parallelism. "Good parallelism" between roots is widely accepted as one of the guidelines of a successful orthodontic treatment. In case there was a large angle between crown axis and root axis, and if we valued only the position of crown in establishing occlusal relationship without considering of the situation of root, the problem of root arrangement between adjacent teeth would be occurred. The estimate of root parallelism in mesiodistal direction before and after orthodontic treatment must be emphasized. The intent of this study was to determine the clinical importance and correlation of the angle between crown axis and root axis. Orthopantomograms of 105 orthodontic patients being treated in Yonsei university were used in this study. Twenty-eight teeth in both maxilla and mandible were selected and analyzed quantitively to evaluate the angle between crown axis and root axis, and obtain the correlationship among the individual teeth. The results are as follows: 1. Among the teeth presenting normal distribution, the maxillary right canine showed the largest mean value( $5.73{\pm}4.42^{\circ}$), which was composed of the crown-root angles, and the mandibular left lateral incisor showed the smallest mean value( $0.60{\pm}3.76^{\circ}$). 2. The crown-root angles of the maxillary incisors and the first molars, and the mandibular central incisors and the first molars didn't show normal distribution and the ranges of these angles were dispersed. 3. Significant differences were present between the crown axis and the root axis except for lower first premolars. (p<0.05) 4. No significant difference was present for the crown-root angle between right and left side, (p<0.05) 5. No significant difference was present for the crown-root angle between male and female except for lower left first premolar. (p<0.05) 6. In the upper right quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, lateral incisor and canine. In the upper left quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor. In the lower right quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, first molar and second molar. In the lower left quadrant, significant correlations were present between crown-root angles of the central incisor and lateral incisor, lateral incisor and canine, first molar and second molar. (p<0.05)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.647-648
• /
• 2006

The length of root canal has to be measured to cure root canal. Several apex locators were developed to measure the length of root canal. And they were verified by X-ray or micrometer method. But these methods do not consider the non-linear bends of pulp and have ${\pm}0.5mm$ error which is large to measure the length of root canal. The purpose of this study is the research of new method to measure the length of root canal and verifying the apex locator using Micro-CT. The length of root canal of 6 teeth were measured with the apex locator. When the apex locator reads 0.5, 0.6, 0.7, 0.5, 0.9, 1.0mm, the teeth with the file fixed were photographed. The average lengths of root canal of 6 teeth measured by Micro-CT were 0.488, 0.589, 0.680, 0.775, 0.897, 0.992mm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.2
• /
• pp.179-182
• /
• 2006

The term odontoma, first introduced by Broca, was originally applied to all odontogenic tumors. Related to the clinical and histological differences, 2 groups of odontoma were defined: compound odontoma and complex odontoma. Complex odontoma is more common in the mandible than in the maxilla, usually occuring in the mandibular premolar-molar area. And this consists of small mass of irregularly arranged enamel, dentine, cementum, and connective tissue, but tooth-like structures are not found. In our case, 34 year old man was diagnosed as the complex odontoma of maxillary sinus by the physical exam, Panex, and C.T scan. We sectioned and removed it, and then confirmed the diagnosis histopathologically. Its uncommon location and size made us report that case and review the literature concerned.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.243-258
• /
• 2008

The purpose of this study was to investigate the relationship between the stages of calcification of various teeth and skeletal maturity stages among Korean individuals. The study subjects consisted 154 female and 179 male ranging from 7 years to 16 years of age. A total of 333 hand-wrist, cephalo-lateral and panoramic radiographs were obtained and analyzed. The tooth development of the mandibular canines, first, second premolars, and second molars were assessed according to the Dermijian's system. Skeletal maturity stages were determined from hand-wrist radiographs by using the SMI system and cephalo-lateral radiographs by using the CVMS, respectively. The results were as follows. 1. The mean ages of each stage of skeletal maturity were consistently younger in female subjects. 2. There was a high correlation between skeletal maturity of hand-wrist and cervical vertebrae in the both sexes. 3. There was a high correlation between skeletal maturity and dental calcification stage of mandibular canines, first premolar, second premolars, and second molar. 4. The mandibular second molar was tooth showing the highest correlation. 5. Percent distributions of the relationship between calcification stages of individual teeth and stages of skeletal maturity were obtained in both sexes. In summary, this suggests that tooth calcification stages from panoramic radiographs might be clinically useful as a maturity indicator of the pubertal growth period.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.386-392
• /
• 2018

Turner syndrome (TS) is a chromosomal disorder caused by monosomy of the X chromosome, with complete or partial absence of the second sex chromosome. Anomalies of root morphology have been found to occur more often in patients with TS, which make endodontic treatment challenging and requires special handling. The patients with TS may also have systematic problems such as cardiac or renal malformations, so in treating these patients it is important for clinicians not only to be aware of the characteristic intraoral findings, but also to make the patients have regular dental check-ups to prevent oral complications in advance. An 12-year-old girl who had been diagnosed with TS at the age of 10 years was referred due to discomfort in the bilateral mandibular premolar regions. Dens evaginatus and taurodontism were detected in all the mandibular premolars characteristically. The bilateral mandibular first premolars had three roots and the bilateral mandibular second premolars had periapical lesion with two roots. Due to the complexity of the root canal anatomy, root canal treatment were completed with a dental microscope to ensure adequate visualization. After 2 years of regular follow-up examinations, there were no clinical sign or symptom associated with the teeth, and no periapical lesion, was found. This case report describes the characteristic oral features and dental management of TS patients.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.117-125
• /
• 2016

Purpose: This study evaluated and compared interradicular distances and cortical bone thickness in Thai patients with Class I and Class II skeletal patterns, using cone-beam computed tomography (CBCT). Materials and Methods: Pretreatment CBCT images of 24 Thai orthodontic patients with Class I and Class II skeletal patterns were included in the study. Three measurements were chosen for investigation: the mesiodistal distance between the roots, the width of the buccolingual alveolar process, and buccal cortical bone thickness. All distances were recorded at five different levels from the cementoenamel junction (CEJ). Descriptive statistical analysis and t-tests were performed, with the significance level for all tests set at p<0.05. Results: Patients with a Class II skeletal pattern showed significantly greater maxillary mesiodistal distances (between the first and second premolars) and widths of the buccolingual alveolar process (between the first and second molars) than Class I skeletal pattern patients at 10 mm above the CEJ. The maxillary buccal cortical bone thicknesses between the second premolar and first molar at 8 mm above the CEJ in Class II patients were likewise significantly greater than in Class I patients. Patients with a Class I skeletal pattern showed significantly wider mandibular buccolingual alveolar processes than did Class II patients (between the first and second molars) at 4, 6, and 8 mm below the CEJ. Conclusion: In both the maxilla and mandible, the mesiodistal distances, the width of the buccolingual alveolar process, and buccal cortical bone thickness tended to increase from the CEJ to the apex in both Class I and Class II skeletal patterns.