• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.825-836
• /
• 1998

The intention of this study was to investigate the preventive effect of chlorhexidine varnish on enamel demineralization. The sample consisted of 57 first premolars scheduled to be extracted for orthodontic purposes. The control group (N=10) was left untreated and the experimental groups were worn with specially designed stainless steel orthodontic bands on premolar for plaque accumulation. The group 1 (N=9) was worn band only, the group 2 (N=19) was applied with chlorhexidine varnish for one time, and the group 3 (N=19) was applied with chlorhexidine varnish for 3 times once a week. After 4 weeks of experimental periods, every specimen were examined by SEM and Vickers hardness test to evaluate and compare the degree of enamel decalcification. The results were as follows: 1. Although SEM revealed various degree of enamel demineralization in every experimental groups, the group 1 showed more severe demineralizations than the group 2 and 3. 2. The mean Vickers Hardness Numbers measured in this study seemed to reveal that there was a statistically significant difference between the control goup and the group 1 (P<0.05), and also a significant difference between the group 1 and the group 2, 3 (P<0.05). And there was no significant difference between the group 2 and the group 3 (p>0.05). 3. The results of VHN did not deemed to show a statistically significant difference between maxillary premolar and mandibular premolar in both group 2 and group 3 (P>0.05).

• Journal of Periodontal and Implant Science
• /
• 제30권2호
• /
• pp.483-490
• /
• 2000

The aim of this study was to analyze the reliability of an ultrasonic device(SDM) measuring soft tissue thickness in relation to tooth position, and to find factors which can influence the reliability. The results showed that 1. measurement error was the largest in the maxillary second molar position and the smallest in the mandibular central incisor position. 2. in a box whisker plot, the difference between two measurements was most widely distributed in molar positions. 3. in Pearson correlation analysis, the relationship between two measurements was the highest in the maxillary lateral incisor position and, the lowest in the maxillary second molar, mandibular first and second premolar position. 4. a stepwise multiple regression analysis could explain the difference of two measurements with various independent variables in 29.7% (P<0.0001). Gingival thickness was the only variable influencing the measurement difference in a statistically significant level(P<0.0001). It can be concluded that its high reliability, ease to use and patient comfort justified the application of the SDM in measurement of soft tissue thickness.

• 치과방사선
• /
• 제23권2호
• /
• pp.303-314
• /
• 1993

The purpose of this study was to find out the prevalence of dental anomalies in 600 normal persons (male:363, female:237) at age 14 to 39 years, through history taking, oral examination, and radiographic observations of subjects. The obtained results were as follows: 1. The prevalences of individual dental anomalies were as follows; Congenitally missing teeth 7%; supernumerary teeth 1.33%; ectopic eruption; 8.50%, transposition;0.33% rotation; 23.67%, microdontia;11.16%(peg lateralis;5.33%, third molar;5.83%), prolonged retention of deciduous teeth;1.33%, crowding 49.83%, and spacing;15.17%. 2. Alterations in numbers of teeth : The most frequently missing teeth were mandibular lateral incisors, followed by mandibular second premolars and maxillary second premolars. In numbers of congenitally missing teeth per person, 52.38% had one missing tooth and 30.95% had two missing teeth. In supernumerary teeth, there was higher rate in male than in female. Most supernumerary teeth were mesiodens of median area in maxilla and the eruption pattern of that teeth generally was unerupted state. 3. In transposition, exchange of position of teeth involved the canine and first premolar. 4. Congenital missing rate of permanent successors in prolonged retention of deciduous teeth was 69.23%. 5. Crowing and spacing had respectively higher rate in mandible and in maxilla.

• Imaging Science in Dentistry
• /
• 제51권4호
• /
• pp.447-454
• /
• 2021

A 16-year-old male presented with pain in the right posterior mandible on chewing that had lasted for several months. The radiographic features of the lesion included a radiolucent-radiopaque mixed-density mass with a radiolucent rim attached to the root of the mandibular right first molar. The preliminary radiographic diagnosis was benign cementoblastoma, which was confirmed by histopathological examination following surgical excision. The lesion recurred 3 years after treatment; radiographically, it consisted of 3 round foci with mixed radiopacity, each with a radiolucent rim near the root of the mandibular right second premolar and the edentulous postoperative region. The lesion was diagnosed as recurrent benign cementoblastoma and a second surgery was scheduled. This report presented an unusual case of recurrent benign cementoblastoma following surgical excision and extraction of the involved tooth, along with a literature review on reported cases of recurrent benign cementoblastoma with a focus on its clinical features and the best treatment options.

• 치과방사선
• /
• 제28권1호
• /
• pp.47-58
• /
• 1998

The purpose of this study was to investigate an influence of the change of central panoramic curves on the image reconstruction in the dental implant CT. The author designed three experimental groups according to the location of central panoramic curve. In group A, central panoramic curve was determined as the curve connecting the center of roots from the first premolar to the first molar. In group B, central panoramic curve was determined as the line connecting the lingual cortical plate at the level of the mesial aspect of the first premolar with the buccal cortical plate at the level of the mesial aspect of the first molar. In Group C, central panoramic curve was determined as the line connecting the buccal cortical plate at the level of the mesial aspect of the first premolar with the lingual cortical plate at the level of the mesial aspect of the first molar. Twenty four reformatted CT images was acquired from four mandibles embedded in the resin block and twenty four contact radiographs of dog specimens were acquired. Each Image was processed under Adobe Photoshop program analysed by MSPA(mandible/maxilla shape pattern analysis) variables such as MXVD, MXHD, UHD, MHD, and LHD. The obtained results were as follows ; 1. The mean of MXVD variable was 19.9, 20.2, and 20.0 in group A, B, and C, respectively, which were smaller than actual value 20.5. But, there was no significant difference among 3 groups (p>0.05). 2. The mean of MXHD, UHD, MHD, and LHD variables in group A, B, and C was 11.9, 12.2, and 12.3; 9.3, 9.5, and 9.6; 10.0, 10.3, and 10.3; 9.2, 9.3, and 9.4 respectively which were equal to or greater than the actual value 11.8, 9.3, 10.0, and 9.2. But, there was no significant difference among 3 groups (p>0.05). 3. The number of noneffective observations with difference over or under 1 mm with comparison to the actual value was 24(20％), 58(48.3％), and 52(43.3％), respectively, in group A, B, and C. 4. In group A, the number of observations over 1 mm and under 1 mm was 9 and 15, respectively, but in group Band C, the number of observations over 1 mm was more than under 1 mm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권5호
• /
• pp.390-398
• /
• 2005

Purpose: The aim of this study was to evaluate the skeletal and dentoalveolar dimensional changes following surgically-assisted rapid maxillary expansion (SARME). Patients & methods: Thirteen adults who had been treated by SARME for transverse maxillary deficiency from May 2000 to December 2003 were evaluated. The SARME procedure was the subtotal Le Fort I osteotomy combined with pterygomaxillary separation and anterior midpalatal osteotomy. Dental study casts and posteroanterior cephalometric radiographs were taken before operation, after removal of expansion device, and follow up period. Nasal cavity width, skeletal and dentoalveolar parameters were measured pre- and post-operatively. Results: 1. Mean nasal cavity width was increased 12%$(0{\sim}21%)$ of total expansion after retention. 2. Mean maxillary interdental width was increased 70%$(47{\sim}99%)$, 95%$(84{\sim}115%)$, and 77%$(57{\sim}94%)$ of total expansion in the canine, the first premolar, and the first molar region, respectively after retention. 3. Mean maxillary alveolar bone width was increased 66%$(42{\sim}84%)$, 74%$(42{\sim}94%)$, and 57%$(31{\sim}78%)$ of total expansion in the canine, the first premolar, and the first molar region, respectively after retention. 4. Mean palatal vault depth was decreased 1.3 mm ($0.5{\sim}2.0$ mm) after retention. 5. Mean interdental and alveolar bone width of the mandibular canine and intermolar width of mandible were slight increased as maxilla was expanded after retention. 6. There were statistical differences between preoperative and postoperative values of nasal cavity, all maxillary interdental and interalveolar widths, palatal vault depth, mandibular interdental and interalveolar width of canine(paired t-test, p<0.05). 7. The maxillary interdental and alveolar bone width were decreased approximately 25% of total expansion by relapse at follow up period. Conclusion: In conclusion, most amounts of maxillary interdental expansions were acquired with the expansion of the maxilla by SARME. For preventing the relapse, approximately 25% of the overexpansion was needed.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.268-277
• /
• 2020

This case report demonstrates two different uprighting mechanics separately applied to mesially tipped mandibular first and second molars. The biomechanical considerations for application of these mechanisms are also discussed. For repositioning of the first molar, which was severely tipped and deeply impacted, a novel cantilever mechanics was used. The molar tube was bonded in the buccolingual direction to facilitate insertion of a cantilever from the buccal side. By twisting the distal end of the cantilever, sufficient uprighting moment was generated. The mesial end of the cantilever was hooked over the miniscrew placed between the canine and first premolar, which could prevent exertion of an intrusive force to the anterior portion of the dentition as a side effect. For repositioning of the second molar, an uprighting mechanics using a compression force with two step bends incorporated into a nickel-titanium archwire was employed. This generated an uprighting moment as well as a distal force acting on the tipped second molar to regain the lost space for the first molar and bring it into its normal position. This epoch-making uprighting mechanics could also minimize the extrusion of the molar, thereby preventing occlusal interference by increasing interocclusal clearance between the inferiorly placed two step bends and the antagonist tooth. Consequently, the two step bends could help prevent occlusal interference. After 2 years and 11 months of active treatment, a desirable Class I occlusion was successfully achieved without permanent tooth extraction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.33.1-33.7
• /
• 2019

Background: The concept of the ideal morphology for the alveolar bone form is an important element to reconstruct or restore the in maximizing esthetic profile and functional alveolar bone restoration. The purpose of this preliminary study is to evaluate the normal alveolar bone structure to provide the standard reference and guide template for use in diagnosing for implant placement, determining the correct amount of bone augmentation in actual clinical practice and producing prostheses based on three-dimensional imaging assessment of alveolar bone. Methods: This study was included 11 men and 11 women (average age, 22.6 and 24.5 years, respectively) selected from among 127 patients. The horizontal widths of alveolar bone of maxilla and mandible were measured at the crestal, mid-root, and root apex level on MDCT (multi-detector computed tomography) images reconstructed by medical imaging software. In addition, tooth dimensions of the central incisors, canines, second premolars, and first molars of maxilla and mandible, including the horizontal width of the interdental alveolar bone crest, were also measured and statistically analyzed. Results: The horizontal alveolar bone width of the palatal side of maxilla showed a distinct increment from the alveolar bone crest to the apical region in both anterior and posterior areas. The average widths of the maxillary alveolar ridge were as follows: central incisor, 7.43 mm; canine, 8.91 mm; second premolar, 9.57 mm; and first molar, 12.38 mm. The average widths of the mandibular alveolar ridge were as follows: central incisor, 6.21 mm; canine, 8.55 mm; second premolar, 8.45 mm; and first molar, 10.02 mm. In the buccal side, the alveolar bone width was not increased from the crest to the apical region. The horizontal alveolar bone width of an apical and mandibular border region was thinner than at the mid-root level. Conclusions: The results of the preliminary study are useful as a clinical guideline when determining dental implant diameter and position. And also, these measurements can also be useful during the production of prefabricated membranes and customized alveolar bone scaffolds.

• 치과방사선
• /
• 제28권2호
• /
• pp.521-537
• /
• 1998

The calcifying epithelial odontogenic tumor is a rare benign odontogenic neoplasm which was first described by Pindborg in 1955 and accounts for less than 1％ of all odontogenic tumors. The tumor occurs primarily in the molar-premolar region of the mandible, and 52％ of cases are associated with an unerupted tooth. The clinical feature is most commonly a slow-growing painless swelling. The tumor may show considerable radiographic variation and usually characteristic histopathologic features. In this study, we report a case of the calcifying epithelial odontogenic tumor on the left mandibular body and ramus area in a 28-year-old male with a brief review of the concerned literatures.

• Restorative Dentistry and Endodontics
• /
• 제38권3호
• /
• pp.160-166
• /
• 2013

This case report demonstrates an unnecessary endodontic treatment of teeth with florid cemento-osseous dysplasia (FCOD) due to a misdiagnosis as periapical pathosis and emphasizes the importance of correct diagnosis to avoid unnecessary treatment. A 30-year-old woman was referred to our institution for apicoectomies of the mandibular left canine and both the lateral incisors. The periapical lesions associated with these teeth had failed to resolve after root canal treatment over a 3-year period. Radiographic examinations revealed multiple lesions on the right canine, the second premolar, and both first molars as well as the anterior region of the mandible. Based on clinical, radiographic and histological evaluations, the patient condition was diagnosed as FCOD. The patient has been monitored for 2 years. To avoid unnecessary invasive treatment, accurate diagnosis is essential before treatment is carried out in managing FCOD.