• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.19-29
• /
• 1995

This study was performed to compare the size of soft palate, tongue and airway according to the types of the malocclusion and evaluate the correlation between the size of soft palate, tongue, airway and dentofacial skeleton respectively. The sample of this study was 98 malocclusion female patients between the ages 12 and 17 years. The lateral cephalometric radiographs were taken and the distance, angle, ratio and area of the dentofacial skeleton, soft palate, tongue and airway were measured and evaluated statistically. The results obtained were as follows: 1. There was significant difference in SNB, ANB, facial angle, facial convexity, A-B plane angel, Y axis to FH, SN-MP, Wits appraisal, ODI and APDI according to the types of malocclusion. 2. The hyoid bone was more posteriorly positioned in Class II malocclusion group than other two groups and superio-inferior position of the hyoid bone was not different according to the malocclusion types. 3. The nasopharyngeal area of Class II and Class III malocclusion group was smaller than that of Class I malocclusion group, and the pharyngeal area of Class II malocclusion group was smaller than that of Class I and Class III maocclusion group. There was no difference of the area of the soft palate, tongue, oropharynx and hypopharynx according to malocclusion types. 4. The ramal height and mandibular body length(Go-Me) showed positive correlation with the area of tongue, nasopharynx, oropharynx, and pharynx. SNA did not correlated with the area of tongue and airway but SNB showed positive correlation with the area of hypopharynx and pharynx. The anterior, posterior facial height, upper and lower central incisor position to facial plane showed positive correlation with tongue area.

• The korean journal of orthodontics
• /
• v.26 no.3
• /
• pp.247-254
• /
• 1996

This study was performed to evaluate the hyoid bone position and airway in skeletal class III malocclusion and to prove the correlation between airway, hyoid bone position and mandibular position. The sample, considered of 47 class III malocclusion patients for experimmtal group and 52 class I malocclusion students for control group. Twenty three linear and angular measurements about hyoid bone position, airway size, mandibular position were taken from the lateral cephalograms. The differences between skeletal class III malocclusion group and normal occlusion group were compared and the correlation were evaluated statistically. The results obtained were as follows, 1. There were significant difference in S-APH, A-APH, N-APH, LAH-PBR, AA-PNS, PNS-ad between class I and class III malocclusion groups. 2. The hyoid bone was more anteriorly positioned in class III malocclusion group than class I malocclusion group and skeletal airway size in class III malocclusion group was smaller than class I malocclusion group. 3. There were significant difference in several measurements especially vertical and angular measurements of hyoid bone position and airway size between male and female. Usually the measurements in male were larger than female. 4. There were no significant correlation between hyoid bone position and airway size also airway size, and didn't showe significant correlation with mandibular position, 5. S-APH showed negative correlation with Wits appraisal and A-APH, N-APH showed positive correlation with Wits appraisal. On the contrary vertical measurements of hyoid bone position showed positive correlation with lower facial height.

• Imaging Science in Dentistry
• /
• v.47 no.2
• /
• pp.93-97
• /
• 2017

Purpose: The purpose of this study was to evaluate the accuracy of panoramic imaging in measuring the right and left gonial angles by comparing the measured angles with the angles determined using a lateral cephalogram of adult patients with class I malocclusion. Materials and Methods: The gonial angles of 50 class I malocclusion patients (25 males and 25 females; mean age: 23 years) were measured using both a lateral cephalogram and a panoramic radiograph. In the lateral cephalograms, the gonial angle was measured at the point of intersection of the ramus plane and the mandibular plane. In the panoramic radiographs, the gonial angle was measured by drawing a line tangent to the lower border of the mandible and another line tangent to the distal border of the ascending ramus and the condyle on both sides. The data obtained from both radiographs were statistically compared. Results: No statistically significant difference was observed between the gonial angle measured using the lateral cephalograms and that determined using the panoramic radiographs. Further, there was no statistically significant difference in the measured gonial angle with respect to gender. The results also showed a statistically insignificant difference in the mean of the right and the left gonial angles measured using the panoramic radiographs. Conclusion: As the gonial angle measurements using panoramic radiographs and lateral cephalograms showed no statistically significant difference, panoramic radiography can be considered in orthodontics for measuring the gonial angle without any interference due to superimposed images.

• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.432-438
• /
• 2022

Objective: To compare crown-root angulations of the permanent maxillary anterior teeth in skeletal Class I, Class II, and Class III Korean malocclusion patients using cone-bean computed tomography (CBCT) images. Methods: Sixty CBCT images were collected from orthodontic patients archive based on skeletal Class I (0˚< A point-nasion-B point angle [ANB] < 4˚), Class II (ANB ≥ 4˚), and Class III (ANB ≤ 0˚) to have 20 samples in each group. Mesiodistal crown-root angulation (MDCRA) and labiolingual crown-root angulation (LLCRA) were evaluated after orientation of images. Crown-root angulations were compared among Class I, Class II, and Class III groups and among the maxillary anterior teeth in each group. Results: LLCRAs of the maxillary central incisor and the lateral incisor were significantly lower in Class III group than those in Class I group. However, those of the canine showed no significant differences among groups. MDCRAs of the maxillary anterior teeth did not significantly differ among groups either. Conclusions: Our results suggest that skeletal Class III malocclusion might affect LLCRA of the maxillary incisors, especially the central incisor.

• Imaging Science in Dentistry
• /
• v.37 no.4
• /
• pp.217-220
• /
• 2007

Purpose: The purpose of this study was to compare the location of the mandibular canal in Class III malocclusion to its location in normal occlusion for adults. Materials and Methods: For this study 32 skeletal Class III patients and 26 normal patients were observed. Four measurements were taken on cross sectional tomography between the first and second molars: the distance from the mandibular canal to the inner surface of both the buccal and lingual cortices, the distance from the mandibular canal to the inferior border of the mandible, and the buccolingual width of the mandible. The buccolingual location of the canals was classified as lingual, central, or buccal. Each measurement was analyzed with an independent t test to compare Class III malocclusion to normal occlusion. Results: Compared to the control group, the prognathic group had a shorter distance from the canal to the inner surface of the lingual cortex and to the base of the mandible. A higher percentage of the canals were located lingually in the prognathic group. Conclusion: This study showed that the mandibular canal was located more lingually and inferiorly in prognathic patients than in patients with normal occlusion. These results could help surgeons to reduce injuries to the inferior alveolar nerve.

• The korean journal of orthodontics
• /
• v.21 no.2 s.34
• /
• pp.309-324
• /
• 1991

The author treated 3 class I malocclusion patients with the lingual appliance followed by the extraction of the 4 bicuspids. One of them was finished with the labial appliance at the final stage. The treatment results were acceptable and the patients had good tolerance to the lingual appliance without complaints in these cases. There were some problems in treatment on the lingual side both the patient and the practioner, but I think we can overcome them with the development of the orthodontic materials, the treatment technics & the increased clinical experience. Of course, we cannot treat all the patients with the lingual braces, but patients are carefully selected, lingual braces will be a valuable orthodontic appliance. In conclusion, the lingual braces have very good esthetic advantages, so the patients, especially in adults, who hesitate or refuse the orthodontic treatment due to the esthetic problem of the labial braces will get the motivation & the chance for the orthodontic treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.667-673
• /
• 1996

The prevalence of class III malocclusion is approximately 5$\sim$9%, and about one fourth of this malocclusion is due to underdeveloped maxilla. Maxillary protraction appliance is an orthopedic device which promote the growth of a deficient maxilla by applying extraoral force to actively growing patients. The object of using maxillary protraction appliance is to guide a normal growth of maxilla and mandible and improve the occlusal relationship and also improve the facial profile. The author treated three patients whom were diagnosed as a class III malocclusion due to deficient maxilla using maxillary protraction appliance and the followings are the conclusions : 1. In these cases, anterior crossbite was corrected by anterior movement of maxilla and downward backward rotation of mandible and simultaneously, anterior facial height was increased. 2. The amount of dental change compare to skeletal change was greater as the patients got older. 3. When 500gm of force to each side was applied, the treatment period has been decreased. 4. As a result of applying the force between maxillary first primary molar and canine, there was a small degree of changes in palatal plane. So, it can be concluded that the maxillary protraction appliance is effective in treating growing patients with a deficient maxilla.

• The korean journal of orthodontics
• /
• v.51 no.4
• /
• pp.250-259
• /
• 2021

Objective: The aim of this study was to compare the differences in mandibular posterior anatomic limit (MPAL) distances stratified by vertical patterns in patients with skeletal Class III malocclusion by using cone-beam computed tomography (CBCT). Methods: CBCT images of 48 patients with skeletal Class III malocclusion (mean age, 22.8 ± 3.1 years) categorized according to the vertical patterns (hypodivergent, normodivergent, and hyperdivergent; n = 16 per group) were analyzed. While parallel to the posterior occlusal line, the shortest linear distances from the distal root of the mandibular second molar to the inner cortex of the mandibular body were measured at depths of 4, 6, and 8 mm from the cementoenamel junction. MPAL distances were compared between the three groups, and their correlations were analyzed. Results: The mean ages, sex distribution, asymmetry, and crowding in the three groups showed no significant differences. MPAL distance was significantly longer in male (3.8 ± 2.6 mm) than in female (1.8 ± 1.2 mm) at the 8-mm root level. At all root levels, MPAL distances were significantly different in the hypodivergent and hyperdivergent groups (p < 0.001) and between the normodivergent and hyperdivergent groups (p < 0.01). MPAL distances were the shortest in the hyperdivergent group. The mandibular plane angle highly correlated with MPAL distances at all root levels (p < 0.01). Conclusions: MPAL distances were the shortest in patients with hyperdivergent patterns and showed a decreasing tendency as the mandibular plane angle increased. MPAL distances were significantly shorter (~3.16 mm) at the 8-mm root level.

• The korean journal of orthodontics
• /
• v.52 no.5
• /
• pp.324-333
• /
• 2022

Objective: The aim of this study was 1) to investigate the prevalence and pattern of dental anomalies (DAs), 2) to compare DAs according to the type of malocclusion, and 3) to investigate the correlation between tooth impaction and other DAs in the Korean orthodontic population. Methods: A total of 3,240 orthodontic patients were classified as Class I, Class II, or Class III malocclusion groups. The presence and location of common DAs, including impaction, microdontia, agenesis, supernumerary tooth, transposition, and fusion, were identified by examining diagnostic records. Furthermore, samples were classified as Group 1 without impaction or Group 2 with impaction. The prevalence of other DAs concurrent with impaction was investigated and compared to Group 1. Results: Impaction was the most prevalent DA, followed by microdontia, agenesis, and supernumerary. Class I and Class III groups showed the same order of prevalence, but agenesis was more frequent than microdontia in the Class II group. The prevalence of the four DAs was lowest in the Class III group. Overall, 8.6% of patients were classified into Group 2. The incidence of DAs other than impaction and the prevalence of multiple concurrent DAs were significantly higher in Group 2. Impaction showed a significant relationship with supernumerary tooth, transposition, and fusion. Conclusions: The prevalence and pattern of DAs varied depending on the type of malocclusion. As there was a higher risk of other DAs in patients with impacted teeth, early detection of the impacted tooth and a detailed diagnosis of other possible DAs may be essential.

• The korean journal of orthodontics
• /
• v.52 no.2
• /
• pp.85-101
• /
• 2022

Objective: To classify facial asymmetry (FA) phenotypes in adult patients with skeletal Class III (C-III) malocclusion. Methods: A total of 120 C-III patients who underwent orthognathic surgery (OGS) and whose three-dimensional computed tomography images were taken one month prior to OGS were evaluated. Thirty hard tissue landmarks were identified. After measurement of 22 variables, including cant (°, mm), shift (mm), and yaw (°) of the maxilla, maxillary dentition (Max-dent), mandibular dentition, mandible, and mandibular border (Man-border) and differences in the frontal ramus angle (FRA, °) and ramus height (RH, mm), K-means cluster analysis was conducted using three variables (cant in the Max-dent [mm] and shift [mm] and yaw [°] in the Manborder). Statistical analyses were conducted to characterize the differences in the FA variables among the clusters. Results: The FA phenotypes were classified into five types: 1) non-asymmetry type (35.8%); 2) maxillary-cant type (14.2%; severe cant of the Max-dent, mild shift of the Man-border); 3) mandibular-shift and yaw type (16.7%; moderate shift and yaw of the Man-border, mild RH-difference); 4) complex type (9.2%; severe cant of the Max-dent, moderate cant, severe shift, and severe yaw of the Man-border, moderate differences in FRA and RH); and 5) maxillary reverse-cant type (24.2%; reverse-cant of the Max-dent). Strategic decompensation by pre-surgical orthodontic treatment and considerations for OGS planning were proposed according to the FA phenotypes. Conclusions: This FA phenotype classification may be an effective tool for differential diagnosis and surgical planning for Class III patients with FA.