• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.289-303
• /
• 2019

This paper presents research on furniture making based on Hojangjul, which is an engraving technique that highlights the wooden patterns of traditional furniture. Somokbang, one of the 12 workshops in Tongyeong, has used Hojangjul as an engraving technique since Imjinwaeran. It was inherited by the late Cheon Sang-won, who was No. 59 of National Important Intangible Cultural Properties, and developed into Samhojang, Ohojang, Seongtoinoimun, Hotguinoimun, and Gyeopguinoimun. It was then spread to Masan, Ulsan, and Gwangyang via marine routes and further into the inland areas via land routes, developing in various patterns and forms. The present study investigated and examined the making techniques and characteristics of Hojangjul engraved in joinery furniture in Tongyeong, Masan, and Ulsan in the Gyeongsang region and Gwangyang and Dongbok in the Jeolla region, thus shedding new light on the traditional techniques that have been gradually disappearing and promoting the transmission, inheritance, and development of the traditional techniques.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.8
• /
• pp.54-65
• /
• 1992

A huge amount of multiplications is required for 2-D filtering on the image data, making it difficult to implement a real-time quincuncial interpolator. In this paper, efficient design technique and VLSI structures for 2-D multipleierless filter are presented. In the filter design, by introducing an efficient scheme for discretizing the frequency response of the prototype filter, it is shown that a significant amount of the computational burden required in the conventional techniques, such as local search, branch and bound techniques, could be saved. In the case of 5$\times$5 filter, it is found that the design technique described in this paper could save about 80% of the computation time, compared to the conventional methods, while providing a comparable performance. For a hardware implementation, two different VLSI structures for 2-D multiplierless filter are also introduced in the paper : One is for block parallel processing and the other for scan-line parallel processing. In both structure, the AP(area-period) figure improves over Wu's structure[4].

• International Journal of Ocean System Engineering
• /
• v.3 no.1
• /
• pp.1-9
• /
• 2013

A design procedure for a ship with minimum resistance had been developed using a numerical optimization method called SQP (Sequential Quadratic Programming) combined with computational fluid dynamics (CFD) technique. The frictional resistance coefficient was estimated by the ITTC 1957 model-ship correlation line formula and the wave-making resistance coefficient was evaluated by the potential-flow panel method with the nonlinear free surface boundary conditions. The geometry of the hull surface was represented and modified by B-spline surface modeling technique during the optimization process. The Series 60 ($C_B$=0.60) hull was selected as a parent hull to obtain an optimized hull that produces minimum resistance. The models of the parent and optimized hull forms were tested at calm water condition in order to demonstrate the validity of the proposed methodolgy.

• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.277-281
• /
• 1996

A technique to improve the analysis of micronuclei(MN) in lymphocytes as a cytogenetic indicator is reported. For the purpose of diminishing the variation of the result from individual reader and making it easier to distinguish accurately a cytokinesis blicked(CB) lymphocyte and micronuclei, we tried a modified one-step silver staining technique as a method for detection of the argyrophilic nucleolar organizer region(AgNOR) with or without conventional Giemsa stain in the slide from CB method. Compared with the conventional Giemsa stain, the preparation processed with this method are especially useful for the accurate analysis of MN of cultured lymphocyte with cytochalasin B. This method will be a useful technique for automated calculation of MN.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.10-13
• /
• 1995

This paper considers the linear-quadratic optimal regulator problem for nonstandard singularly perturbed systems making use of the recursive technique. We first derive a generalized Riccati differential equation by the Hamilton-Jacobi equation. In order to obtain the feedback gain, we must solve the generalized algebraic Riccati equation. Using the recursive technique, we show that the solution of the generalized algebraic Riccati equation converges with the rate of convergence of O(.epsilon.). The existence of a bounded solution of error term can be proved by the implicit function theorem. It is enough to show that the corresponding Jacobian matrix is nonsingular at .epsilon. = 0. As a result, the solution of optimal regulator problem for nonstandard singularly perturbed systems can be obtained with an accuracy of O(.epsilon.$^{k}$ ). The proposed technique represents a significant improvement since the existing method for the standard singularly perturbed systems can not be applied to the nonstandard singularly perturbed systems.

• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2009

Marbling dyeing technique shows beautiful flowing pattern because the pattern is transferred to the medium by the pigments floating onto the viscous solution base. However, this marbling pattern does not have any reproducibility and the result of accidental pattern formation. Marbling process contains many complicated procedures such as making marbling base, mordanting the medium, and bubble removal with size limitation. Computer changed the many aspects in textile design and digital technique is used in many design production. However, it is impossible to produce marbling pattern with digital drawing. In this research, the digital textile design starting from marbling pattern was developed for digital textile printing. Marbling was done to produce the initial motifs and scanned. Several marbling media such as silk, polyester, and paper were used. Photoshop was used to process and develop textile design based on these marbling motifs. One repeat was developed and various colorways were tried. The developed textile design were printed using DTP.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.1
• /
• pp.51-58
• /
• 2005

The purpose of the Delphi technique is to elicit information and judgments from participants to facilitate problem-solving, planning, and decision-making. It does so without physically assembling the contributors. Instead of it, information is exchanged via mail, FAX, or email. This technique is designed to take advantage of participants' creativity as well as the facilitating effects of group involvement and interaction. It is structured to capitalize on the merits of group problem-solving and minimize the liabilities of group problem-solving. In this paper, we design and implement delphi system using instant messenger.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.184-192
• /
• 1995

Although ship's draught information onboard is substantial for both the safety of navigation and the estimation of loaded cargoes its accuracy depends in traditional surveying method on the skillfulness of observers and the condition of the sea surface round the vessel. To obtain more accurate information accessibly measuring instruments with sophisticated sensors such as mechanical electronic and ultrasonic transducers have been developed. however they have still limitation in accuracy and in making up a system due to the complexity of processing signal. In this paper we propose a he technique for analyzing ultrasonic pulse signal in order to improve the measurement accuracy and simplify a remote sensing system of draught by ultrasonic waves. This technique is useful for measuring draught being considered the influence of sea surface fluctuation and for transferring its data briefly to required equipment in integrated bridge system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.2
• /
• pp.169-175
• /
• 2009

This paper presents motion control of the Inchworm composed of the piezoelectric actuators and mechanical elements. Piezoelectric actuator shows nonlinear response characteristics including hysteresis due to the ferroelectric characteristics. This paper proposes feedback control scheme to improve the ability of tracking response to complex input signal and suppress the phenomenon of hysteresis using the sliding mode control technique with the integrator. The sliding mode control system has the limit to minimize both the settle time and overshoot. For making up this limit, this paper also suggests input shaping technique suitable to the inchworm control system.

• Journal of Technologic Dentistry
• /
• v.41 no.2
• /
• pp.149-156
• /
• 2019

Purpose: Prosthodontics for edentulous patients is a treatment technique using implant, which has impactful results in retention and support effects. Methods: As a retention technique, SCRP (screw and cement retained implant prosthesis) has reported in many studies as a beneficial method for both patients and curers, which can reduce errors in process of making abutment and top implant. Results: Prosthesis manufacturing, as polymerization method of hardened resin teeth with thermoplastic resin, is helpful for patients with aesthetic and financial situations regarding residual ridge and interocclusal relationship, also indicates reliable results in both retention and care. Conclusion: Using SCRP technique, we notably obtained a clinical and aesthetic outcome from five implants in anterior tooth, which are half fixable and detachable implants on screw of implant abutment by the technicians at anytime.