• 제목/요약/키워드: Majority direction

검색결과 157건 처리시간 0.021초

Novel deinterlacing algorithm using neighboring interlaced pixels directions statistics

  • Wang, An;Chen, Xiangdong;Yang, Yang;Jeong, Jechang
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2011년도 추계학술대회
    • /
    • pp.204-208
    • /
    • 2011
  • This paper proposes a novel deinterlacing algorithm using neighboring deinterlacing pixels directions weight, which can obtain the true deinterlacing direction of the interpolated pixel. The proposed algorithm determines the direction of the current interpolated pixel using MELA direction determination method. To obtain more accurate deinterlacing direction and increase interpolation direction correlation, the directions of neighboring pixels around the current interpolated pixel are considered. The current direction and the neighboring majority direction are compared to decide an interpolated method. But it cost slightly CPU time increasing since neighboring pixels directions determination and statistics. Experimental results demonstrate that the proposed algorithm outperforms the conventional deinterlacing methods.

  • PDF

재난관련 국내 간호연구 동향 분석 (Trends of Nursing Research on Disasters in Korea)

  • 이옥철
    • 한국보건간호학회지
    • /
    • 제28권3호
    • /
    • pp.432-444
    • /
    • 2014
  • Purpose: This descriptive study was conducted in order to investigate the research trends of past nursing studies related to disasters in Korea, and to identify the direction of future research. Methods: Fifty studies conducted from July 1995 to June 2014 were analyzed according to general characteristics, disaster phase, disaster type, and research theme based on the four areas and 10 domains of the ICN Framework of Disaster Nursing Competencies. Results: The majority of studies were designed using quantitative methods (29). In disaster type, 12 studies explored natural disasters, and 14 explored manmade disasters. Disaster responders were the subject of 31 studies. In relation to research topics, the majority of studies were in the area of preparedness competencies of the ICN Framework (26). The studies were concentrated in the domain of education and preparedness (24). Conclusion: The total number of studies on disasters had increased over the years, while the topics failed to deal with all domains of the ICN Framework. The results indicate that the future direction of nursing research on disasters is to be vitalized through the flexibility of research design, systematic approach based on global perspectives, research on emergency responders and vulnerable people, and research relating to community-based disaster nursing.

Classification of Man-Made and Natural Object Images in Color Images

  • Park, Chang-Min;Gu, Kyung-Mo;Kim, Sung-Young;Kim, Min-Hwan
    • 한국멀티미디어학회논문지
    • /
    • 제7권12호
    • /
    • pp.1657-1664
    • /
    • 2004
  • We propose a method that classifies images into two object types man-made and natural objects. A central object is extracted from each image by using central object extraction method[1] before classification. A central object in an images defined as a set of regions that lies around center of the image and has significant color distribution against its surrounding. We define three measures to classify the object images. The first measure is energy of edge direction histogram. The energy is calculated based on the direction of only non-circular edges. The second measure is an energy difference along directions in Gabor filter dictionary. Maximum and minimum energy along directions in Gabor filter dictionary are selected and the energy difference is computed as the ratio of the maximum to the minimum value. The last one is a shape of an object, which is also represented by Gabor filter dictionary. Gabor filter dictionary for the shape of an object differs from the one for the texture in an object in which the former is computed from a binarized object image. Each measure is combined by using majority rule tin which decisions are made by the majority. A test with 600 images shows a classification accuracy of 86%.

  • PDF

황삭 가공을 위한 최적 직선 평행 공구경로 생성 (An Optimized Direction Parallel Tool Path Generation for Rough Machining)

  • 김현철
    • 대한기계학회논문집A
    • /
    • 제32권9호
    • /
    • pp.761-769
    • /
    • 2008
  • The majority of mechanical parts are manufactured by milling machines. Hence, geometrically efficient algorithms for tool path generation and physical considerations for better machining productivity with guarantee of machining safety are the most important issues in milling tasks. In this paper, an optimized path generation algorithm for direction parallel milling which is commonly used in the roughing stage is presented. First of all, a geometrically efficient tool path generation algorithm using an intersection points-graph is introduced. Although the direction parallel tool path obtained from geometric information have been successful to make desirable shape, it seldom consider physical process concerns like cutting forces and chatters. In order to cope with these problems, an optimized tool path, which maintains constant MRR in order to achieve constant cutting forces and to avoid chatter vibrations at all time, is introduced and the result is verified. Additional tool path segments are appended to the basic tool path by using a pixel based simulation technique. The algorithm has been implemented for two dimensional contiguous end milling operations, and cutting tests are conducted by measuring spindle current, which reflects machining situations, to verify the significance of the proposed method.

단축 차집합 순회부호 (272,190)에 기반한 DARC 오류정정 복호기 설계 (The Design of DARC Error Correction Decoder Based on (272,190) Shortened Difference Set Cyclic Code)

  • 심병섭;박형근;김환용
    • 한국컴퓨터산업학회논문지
    • /
    • 제2권6호
    • /
    • pp.791-802
    • /
    • 2001
  • 본 논문에서는 FM 부가방송 시스템을 위한 오류 정정 복호기에서 오류 검출 및 오류 정정을 위해 다수결 논리 복호가 가능한 (272,190) 단축 차집합 순환 부호를 사용하였다. 블록과 프레임 구조상에서 행 방향과 열방향 오류정정의 결과를 저장할 수 있고, 행과 열 방향 오류 플래그 메모리 구조를 갖는 오류정정 복호기는 정정될 비트로부터 이미 정정된 비트의 영향을 제거시켜 다수결 논리에 의해 결정된 출력을 무효화할 수 있도록 설계되었다. 행 방향 오류정정의 성공 결과를 나타내는 오류 플래그에 의해 오류정정이 완벽하게 수행되었다면 열 방향의 오류정정은 수행하지 않도록 하여 행과 열 방향의 오류정정을 모두 수행하는 기존의 오류정정 복호기에 비해 오류정정 방식을 개선하였다.

  • PDF

방향성 오류 교정을 위한 투표 결정 기반의 디인터레이싱 방법 (Vote Decision-based Deinterlacing Scheme For Directional Error Correction)

  • 오세훈;이여송;안창범;오승준
    • 방송공학회논문지
    • /
    • 제14권3호
    • /
    • pp.342-356
    • /
    • 2009
  • 본 논문에서는 비월 주사 영상을 하나의 필드만을 사용하여 순차 주사 영상으로 변환시키는 투표 결정 기반 디인터레이싱 보간방법(VDD)을 제안한다. VDD는 투표 결정 방법을 이용하여 4단계 보간 과정을 거치게 된다. 1단계는 MM-ELA방법을 이용하여 거짓 에지 의심영역을 검출하는 과정이다. 검출된 영역은 상위 주변 화소 정보를 이용한 다수결 투표 결정 방법인 2단계 과정으로 에지 방향을 결정하며 미결정 방향은 3단계 과정인 상, 하위 주변 화소 정보를 이용한 다수결 투표 및 방향성 평균으로 에지 방향을 보존하고 화질 열화를 최소화한다. 마지막으로 위 단계에서 결정되지 못한 화소는 세밀한 방향을 고려할 수 있는 DOI를 이용하여 보간한다. 계층 구조의 VDD는 복잡도가 높지만 계조도 변화에 취약한 기존 방법들에 비하여 정교한 에지를 추출할 수 있으며 실험결과를 통해 객관적, 주관적 우수성을 나타낸다.

Potential wind power generation at Khon Kaen, Thailand

  • Supachai, Polnumtiang;Kiatfa, Tangchaichit
    • Wind and Structures
    • /
    • 제35권6호
    • /
    • pp.385-394
    • /
    • 2022
  • The energy demand of the world is increasing rapidly, mainly using fossil energy, which causes environmental damage. The wind is free and clean energy to solve the environmental problems. Thailand is one of the developing nations, and the majority of its energy is obtained from petroleum, natural gas and coal. The objective of this study is to test the characteristics of wind energy at Khon Kaen in Thailand. The wind measurement tools, the 3-cup anemometers to measure wind speed, and wind vanes to measure wind direction, were mounted on a wind tower mast to record wind data at the heights of 60, 90 and 120 meters above ground level (AGL) for 5 years between January 2012 and December 2016. The results show that the annual mean wind speeds were 3.79, 4.32 and 4.66 m/s, respectively. The highest mean wind speeds occurred in June, August and December, in order, and the lowest occurred in September. The majority of prevailing wind directions were from the North-East and South-West directions. The average annual wind shear coefficient was 0.297. Furthermore, five wind turbines with rated power from 0.85 to 4.5 MW were selected to estimate the wind energy output and it was found that the maximum AEP and CF were achieved from the low cut-in speed and high hub-height wind turbines. This important information will help to develop wind energy applications, such as the plan to produce electricity and the calculation of the wind load that affects tall and large structures.

Propagation characteristics of CMEs associated magnetic clouds and ejecta

  • 김록순;;조경석;문용재;;박영득
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.132.2-132.2
    • /
    • 2012
  • We have investigated the characteristics of magnetic cloud (MC) and ejecta (EJ) associated coronal mass ejections (CMEs) based on the assumption that all CMEs have a flux rope structure. For this, we used 54 CMEs and their interplanetary counter parts (interplanetary CMEs: ICMEs) that constitute the list of events used by the NASA/LWS Coordinated Data Analysis Workshop (CDAW) on CME flux ropes. We considered the location, angular width, and speed as well as the direction parameter, D. The direction parameter quantifies the degree of asymmetry of the CME shape, and shows how closely the CME propagation is directed to Earth. For the 54 CDAW events, we found several properties of the CMEs as follows: (1) the average value of D for the 23 MCs (0.62) is larger than that for the 31 EJs (0.49), which indicates that the MC-associated CMEs propagate more directly to the Earth than the EJ-associated CMEs; (2) comparison between the direction parameter and the source location shows that the majority of the MC-associated CMEs are ejected along the radial direction, while many of the EJ-associated CMEs are ejected non-radially; (3) the mean speed of MC-associated CMEs (946 km/s) is faster than that of EJ-associated CMEs (771 km/s). For seven very fast CMEs (>1500 km/s), all CMEs with large D (>0.4) are associated with MCs and the CMEs with small D are associated with EJs. From the statistical analysis of CME parameters, we found the superiority of the direction parameter. Based on these results, we suggest that the CME trajectory essentially decides the observed ICME structure.

  • PDF

Modified Protraction Headgear를 이용한 상악골 전방 견인시 악안면골의 초기반응에 관한 Holographic Interferometry 연구 (A STUDY OF HOLOGRAPHIC INTERFEROMETRY ON THE INITIAL REACTION OF MAXILLOFACIAL COMPLEX TO THE MAXILLARY PROTRACTION USING THE ANTENNA TYPE MODIFIED PROTRACTION HEAD GEAR)

  • 이공근;유영규
    • 대한치과교정학회지
    • /
    • 제22권3호
    • /
    • pp.531-556
    • /
    • 1992
  • The majority of the commonly used protraction headgears for the protraction of small and/or retropositioned maxilla not allow a change in the point of force application or direction of the force delivery to attain predictable results because of the position of the upper and lower lips to avoid discomfort to the patient. The purpose of this study was to investigate the initial reaction of maxillofacial complex according to the change of force variables such as direction and point of force application with designing an antenna type-modified protraction head gear. A macerated human skull with well aligned upper teeth was used to experimental model and the investigation was done by double exposure holographic interferometry. Fringe patterns of each protraction conditions were compared and analized. The results were as follows. (Frontal view) 1. The Counterclockwise rotation of the maxilla was showed by parallel protraction to occlusal plane and the fringe was decreased in number as higher point of force application. 2. Generally, the number of fringe was increased in 500gm of protraction force than in 300gm. 3. When apply the protraction force to the maxilla with rapid palatal expansion, the direction of fringe patterns was differed from the protraction without expansion. 4. In most of cases, the counterclockwise rotation was decreased in case of the direction of the force is $20^{\circ}$ downward to occlusal plane compared to the parallel direction. 5. At the point of force application is 15mm above and the direction of force is 20 downward to occlusal plane , the translation of the maxillary complex was showed. (Lateral view) 6. The direction of fringe patterns of the facial bones were differed each other by the sutures, and showed almost parallel when apply the 300gm and 500gm of protraction force. 7. In case of rapid palatal expansion with protraction of the maxilla, the fringe patterns between the maxillary area and the area from the posterior of the maxillary first molar to the pterygomaxillary fissure were differed. In case without rapid palatal expansion, the changes of direction and point of the force application did not affect to the direction and the number of the fringe patterns.

  • PDF

로하스를 위한 니트웨어 디자인 개발 (Development of Knit Wear Designs for LOHAS)

  • 장애란
    • 복식
    • /
    • 제58권3호
    • /
    • pp.79-92
    • /
    • 2008
  • The purpose of this study is to develop knitwear design expressed not also Green but also LOHAS using natural yarns(wool and cotton) dyed with various natural sources(sappanwood, indigo plant, turmeric, cochineal, coffee, gallnut, and persimmon juice). This researcher tried to suggest solution scheme through the development of knitwear designs to break from the cottage industry and the limitation of design in Jeju and to preserve of traditional dye with persimmon juice simultaneously. Knitting is the formation of a fabric by the interlooping of one or more sets of yarns with hand knitting or industrial knitting. In hand-knitting, the two fundamental stitches are described as knit depending on the direction of the loop formation, front to back or back to front. In machine-knitting, the direction of loop formation is fixed, unless the stitch is mechanically transferred from front to back needle bed or vice versa. Industrial knitting technology can be divided into two main areas - weft knitting and warp knitting. Each has a different principle of construction. The majority of knitted fabrics for clothing are weft-knitted, and so this study is used weft-knitting and hand knitting technology. To achieve this purpose, researcher tried to present a lot of knitwear designs using yarns dyed with various natural sources focusing on Modern & Sophisticated Image and Elegance & Romantic Image to satisfy adult and missy consumer needs.