• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.204-208
• /
• 2011

This paper proposes a novel deinterlacing algorithm using neighboring deinterlacing pixels directions weight, which can obtain the true deinterlacing direction of the interpolated pixel. The proposed algorithm determines the direction of the current interpolated pixel using MELA direction determination method. To obtain more accurate deinterlacing direction and increase interpolation direction correlation, the directions of neighboring pixels around the current interpolated pixel are considered. The current direction and the neighboring majority direction are compared to decide an interpolated method. But it cost slightly CPU time increasing since neighboring pixels directions determination and statistics. Experimental results demonstrate that the proposed algorithm outperforms the conventional deinterlacing methods.

• Journal of Korean Public Health Nursing
• /
• v.28 no.3
• /
• pp.432-444
• /
• 2014

Purpose: This descriptive study was conducted in order to investigate the research trends of past nursing studies related to disasters in Korea, and to identify the direction of future research. Methods: Fifty studies conducted from July 1995 to June 2014 were analyzed according to general characteristics, disaster phase, disaster type, and research theme based on the four areas and 10 domains of the ICN Framework of Disaster Nursing Competencies. Results: The majority of studies were designed using quantitative methods (29). In disaster type, 12 studies explored natural disasters, and 14 explored manmade disasters. Disaster responders were the subject of 31 studies. In relation to research topics, the majority of studies were in the area of preparedness competencies of the ICN Framework (26). The studies were concentrated in the domain of education and preparedness (24). Conclusion: The total number of studies on disasters had increased over the years, while the topics failed to deal with all domains of the ICN Framework. The results indicate that the future direction of nursing research on disasters is to be vitalized through the flexibility of research design, systematic approach based on global perspectives, research on emergency responders and vulnerable people, and research relating to community-based disaster nursing.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1657-1664
• /
• 2004

We propose a method that classifies images into two object types man-made and natural objects. A central object is extracted from each image by using central object extraction method[1] before classification. A central object in an images defined as a set of regions that lies around center of the image and has significant color distribution against its surrounding. We define three measures to classify the object images. The first measure is energy of edge direction histogram. The energy is calculated based on the direction of only non-circular edges. The second measure is an energy difference along directions in Gabor filter dictionary. Maximum and minimum energy along directions in Gabor filter dictionary are selected and the energy difference is computed as the ratio of the maximum to the minimum value. The last one is a shape of an object, which is also represented by Gabor filter dictionary. Gabor filter dictionary for the shape of an object differs from the one for the texture in an object in which the former is computed from a binarized object image. Each measure is combined by using majority rule tin which decisions are made by the majority. A test with 600 images shows a classification accuracy of 86%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.9
• /
• pp.761-769
• /
• 2008

The majority of mechanical parts are manufactured by milling machines. Hence, geometrically efficient algorithms for tool path generation and physical considerations for better machining productivity with guarantee of machining safety are the most important issues in milling tasks. In this paper, an optimized path generation algorithm for direction parallel milling which is commonly used in the roughing stage is presented. First of all, a geometrically efficient tool path generation algorithm using an intersection points-graph is introduced. Although the direction parallel tool path obtained from geometric information have been successful to make desirable shape, it seldom consider physical process concerns like cutting forces and chatters. In order to cope with these problems, an optimized tool path, which maintains constant MRR in order to achieve constant cutting forces and to avoid chatter vibrations at all time, is introduced and the result is verified. Additional tool path segments are appended to the basic tool path by using a pixel based simulation technique. The algorithm has been implemented for two dimensional contiguous end milling operations, and cutting tests are conducted by measuring spindle current, which reflects machining situations, to verify the significance of the proposed method.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.6
• /
• pp.791-802
• /
• 2001

In this paper, DARC(Data Radio Channel) error correction decoder for the U Subcarrier Broadcasting System is designed of using (272,190)$\times$(272,190) product code based on (272,190) shortened difference set cyclic code. This decoder has error flag of column and row direction that can store the result of the error correction of column and row direction in the block and frame structure, is designed to be of no benefit the output with majority logic determination to cancel the corrected and determined bit, and can improve by using the error correction method that no error correction of the row direction is performed, if error correction of the column direction is completely performed by error flag.

• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.342-356
• /
• 2009

This paper presents a vote decision-based deinterlacing scheme for false directional error correction(VDD) to convert interlaced signal into non-interlaced signal using only one fields. The VDD using the vote decision goes through four steps process. The first step extracts regions having doubt of false edge using MM-ELA method. In these regions, the edge direction is decided by the majority vote using upper adjacent pixels's information through the second step. But, we still have undecided directions, which will be decided by the majority vote and the directional average decision at the third step. This step preserves the edge directions and minimizes visual degradation. Finally, the last step interpolates undecided pixels using DOI method which can consider the fine edge direction. Although the VDD with hierarchical structure has a high complexity, it can extract delicate edge compared to other pixel-by-pixel or window-by-window deinterlacing algorithms. Simulation results show that it has significantly improved both the subjective and objective qualities of the reconstructed images.

• Wind and Structures
• /
• v.35 no.6
• /
• pp.385-394
• /
• 2022

The energy demand of the world is increasing rapidly, mainly using fossil energy, which causes environmental damage. The wind is free and clean energy to solve the environmental problems. Thailand is one of the developing nations, and the majority of its energy is obtained from petroleum, natural gas and coal. The objective of this study is to test the characteristics of wind energy at Khon Kaen in Thailand. The wind measurement tools, the 3-cup anemometers to measure wind speed, and wind vanes to measure wind direction, were mounted on a wind tower mast to record wind data at the heights of 60, 90 and 120 meters above ground level (AGL) for 5 years between January 2012 and December 2016. The results show that the annual mean wind speeds were 3.79, 4.32 and 4.66 m/s, respectively. The highest mean wind speeds occurred in June, August and December, in order, and the lowest occurred in September. The majority of prevailing wind directions were from the North-East and South-West directions. The average annual wind shear coefficient was 0.297. Furthermore, five wind turbines with rated power from 0.85 to 4.5 MW were selected to estimate the wind energy output and it was found that the maximum AEP and CF were achieved from the low cut-in speed and high hub-height wind turbines. This important information will help to develop wind energy applications, such as the plan to produce electricity and the calculation of the wind load that affects tall and large structures.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.132.2-132.2
• /
• 2012

We have investigated the characteristics of magnetic cloud (MC) and ejecta (EJ) associated coronal mass ejections (CMEs) based on the assumption that all CMEs have a flux rope structure. For this, we used 54 CMEs and their interplanetary counter parts (interplanetary CMEs: ICMEs) that constitute the list of events used by the NASA/LWS Coordinated Data Analysis Workshop (CDAW) on CME flux ropes. We considered the location, angular width, and speed as well as the direction parameter, D. The direction parameter quantifies the degree of asymmetry of the CME shape, and shows how closely the CME propagation is directed to Earth. For the 54 CDAW events, we found several properties of the CMEs as follows: (1) the average value of D for the 23 MCs (0.62) is larger than that for the 31 EJs (0.49), which indicates that the MC-associated CMEs propagate more directly to the Earth than the EJ-associated CMEs; (2) comparison between the direction parameter and the source location shows that the majority of the MC-associated CMEs are ejected along the radial direction, while many of the EJ-associated CMEs are ejected non-radially; (3) the mean speed of MC-associated CMEs (946 km/s) is faster than that of EJ-associated CMEs (771 km/s). For seven very fast CMEs (>1500 km/s), all CMEs with large D (>0.4) are associated with MCs and the CMEs with small D are associated with EJs. From the statistical analysis of CME parameters, we found the superiority of the direction parameter. Based on these results, we suggest that the CME trajectory essentially decides the observed ICME structure.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.531-556
• /
• 1992

The majority of the commonly used protraction headgears for the protraction of small and/or retropositioned maxilla not allow a change in the point of force application or direction of the force delivery to attain predictable results because of the position of the upper and lower lips to avoid discomfort to the patient. The purpose of this study was to investigate the initial reaction of maxillofacial complex according to the change of force variables such as direction and point of force application with designing an antenna type-modified protraction head gear. A macerated human skull with well aligned upper teeth was used to experimental model and the investigation was done by double exposure holographic interferometry. Fringe patterns of each protraction conditions were compared and analized. The results were as follows. (Frontal view) 1. The Counterclockwise rotation of the maxilla was showed by parallel protraction to occlusal plane and the fringe was decreased in number as higher point of force application. 2. Generally, the number of fringe was increased in 500gm of protraction force than in 300gm. 3. When apply the protraction force to the maxilla with rapid palatal expansion, the direction of fringe patterns was differed from the protraction without expansion. 4. In most of cases, the counterclockwise rotation was decreased in case of the direction of the force is $20^{\circ}$ downward to occlusal plane compared to the parallel direction. 5. At the point of force application is 15mm above and the direction of force is 20 downward to occlusal plane , the translation of the maxillary complex was showed. (Lateral view) 6. The direction of fringe patterns of the facial bones were differed each other by the sutures, and showed almost parallel when apply the 300gm and 500gm of protraction force. 7. In case of rapid palatal expansion with protraction of the maxilla, the fringe patterns between the maxillary area and the area from the posterior of the maxillary first molar to the pterygomaxillary fissure were differed. In case without rapid palatal expansion, the changes of direction and point of the force application did not affect to the direction and the number of the fringe patterns.

• Journal of the Korean Society of Costume
• /
• v.58 no.3
• /
• pp.79-92
• /
• 2008

The purpose of this study is to develop knitwear design expressed not also Green but also LOHAS using natural yarns(wool and cotton) dyed with various natural sources(sappanwood, indigo plant, turmeric, cochineal, coffee, gallnut, and persimmon juice). This researcher tried to suggest solution scheme through the development of knitwear designs to break from the cottage industry and the limitation of design in Jeju and to preserve of traditional dye with persimmon juice simultaneously. Knitting is the formation of a fabric by the interlooping of one or more sets of yarns with hand knitting or industrial knitting. In hand-knitting, the two fundamental stitches are described as knit depending on the direction of the loop formation, front to back or back to front. In machine-knitting, the direction of loop formation is fixed, unless the stitch is mechanically transferred from front to back needle bed or vice versa. Industrial knitting technology can be divided into two main areas - weft knitting and warp knitting. Each has a different principle of construction. The majority of knitted fabrics for clothing are weft-knitted, and so this study is used weft-knitting and hand knitting technology. To achieve this purpose, researcher tried to present a lot of knitwear designs using yarns dyed with various natural sources focusing on Modern & Sophisticated Image and Elegance & Romantic Image to satisfy adult and missy consumer needs.