• 한국문헌정보학회지
• /
• 제35권1호
• /
• pp.28-28
• /
• 2001

The second research of "a study of the evaluation indicators in Korean public libraries’ had as Its major objective the identification of Indicators and broad dimensions of public library effectiveness in Korea. The managers and librarians of the 175 public libraries in the sample were asked to rate the performance of their libraries. Factor analysis was used to derive 11 dimensions of effectiveness. The dimensions fit four different models of organizational effectiveness.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.405-412
• /
• 2002

The performance of a hammer/driving systems is a major factor which affects bearing capacity and integrity of installed piles. Hammer performance can be evaluated from the results of dynamic pile testing using Pile Driving Analyzer(PDA). By comparing the rated energy with measured maximum transferred energy(EMX), the energy transfer ratio(ETR) can be calculated. This paper based on the dynamic measurements of 442 cases in 130 piling projects and evaluated ETR according to the hammer types(hydraulic and drop hammers) and pile types(steel and concrete piles).

• 대한인간공학회지
• /
• 제35권2호
• /
• pp.75-84
• /
• 2016

Objective: The aim of this study is to suggest some improvement ideas based on the validity and the reliability analyses of the current safety culture measurement method applied to the Korean nuclear power industry. Background: Wrong safety culture is known as one of the major causes of the disasters such as the space shuttle Columbia disaster or the Fukushima Nuclear Power Plant accident. Assessment of safety culture of an organization is important to build a safer organizational environment as well as to identify the risks hidden in the organization. Method: A face validity of the current safety culture measurement method was analyzed by comparison of the key factors of safety culture in the Korean nuclear power industry with those factors reviewed in the previous studies. The current interview method was analyzed to identify the problems which degrade the consistency of evaluation. Results: Most safety culture factors reviewed in the literatures are covered in the list of the Korean nuclear power industry safety culture factors. However the unstructured questions used in the interview may result in inconsistency of safety culture evaluation among interviewers. Conclusion: This study suggests some examples which might improve the consistency of interviewers' evaluation on safety culture such as a post interview evaluation form. Application: An extended post interview evaluation form might help to increase the accuracy of the interviewing method for Korean nuclear industry safety culture evaluation.

• 가족자원경영과 정책
• /
• 제24권2호
• /
• pp.49-68
• /
• 2020

This research seeks to examine the relationship between multicultural education experiences and the multicultural acceptability of military officers. The sample included 552 Republic of Korea Army officers and non-commissioned officers(NCOs) who were located in Gangwon-Do and Gyeonggi-Do. For the statistical analysis, SPSS 18.0 was used to perform descriptive statistical analysis, frequency analysis, differential verification, and multiple regression analysis. The major analysis results are as follows: First, The multicultural acceptability of the military officers and NCOs, including sub-factors, was above the mean level; in terms of the ranking per sub-factor, the scores were in the order of diversity, relationship, and universality. The experience frequency of the targets and the evaluation was lowest in the educational experience within the military, and the evaluations were in the order of public media, school, and military. Second, The differential verification, depending on the characteristics of the sociology of the population and the existence of the multicultural educational experience, showed that the duration of education(personal factor), marital status(family factor), existence of a foreign relative(family factor), and existence of experience of managing multicultural personnel as soldiers under command(military-related factor) showed a significant difference in multicultural acceptability. Additionally, the existence of multicultural education through schools and public media lead to a significant difference in multicultural acceptability, but the existence of education within the military did not lead to a significant difference. Third, The analysis of the influencing relationship through multiple regression analysis showed that the higher the evaluation of multicultural education through the military, school, and public media, the higher the multicultural acceptability.Therefore, this research proposes multicultural educational plans that may improve the multicultural acceptability of military officers and NCOs as a way to establish a multicultural composition in the army.

• 한국항만경제학회지
• /
• 제28권3호
• /
• pp.27-44
• /
• 2012

세계 각국은 신재생 에너지 가운데 해상풍력 발전에 국가적 역량을 집중하면서 해상풍력 터빈의 용량을 대형화하고 있다. 특히 해상풍력 터빈은 부피와 중량이 큰 특징이 있어 육상운송에 어려움이 있어 해상풍력 전용항만이 필요하다. 따라서 본 연구에서는 국내 해상풍력 단지가 성공적으로 조성 및 운영될 수 있도록 최적의 전용항만 입지선정에 영향을 끼치는 평가항목을 분석하여 국가정책 의사결정에 올바른 방향을 제시하고자 하였다. 이를 위해 Fuzzy-AHP 기법을 적용하여 평가항목 별 중요도를 도출하였다. 평가항목은 수준 I에서는 5가지, 즉 집적 요인, 지역 요인, 경제 요인, 입지 요인, 컨소시엄 요인이 선정되었다. 이 가운데 집적 요인 37.4%, 입지 요인 34.2%, 경제 요인 24.5%가 주요한 항목으로 분석되었다. 그리고 수준 II에서는 각 요인에 3가지 항목이 선정되어 모두 15개 평가항목이 선정되었다. 분석 결과를 보면, 해상풍력 전용항만 입지 선정에 있어서 핵심적으로 고려되어야 할 항목은 풍력산업의 집적도, 항만운영의 경제성을 확보하는 물동량 규모, 해상풍력 관련 산업의 발달 정도, 그리고 개발될 해상풍력 단지와의 근접성으로 나타났다. 즉 해상풍력 전용항만 건설은 항만건설 측면과 해상풍력 터빈 제조기업의 입지 선호지역을 복합적으로 고려해야 한다는 의미이다. 따라서 정부가 해상풍력 전용항만을 건설함에 있어서 풍력터빈 제조기업의 의견을 충분히 반영하는 것이 요구된다.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.279-288
• /
• 2019

To obtain insightful knowledge of geochemical process controlling fluoride enrichment in groundwater of the villages near Shilabati river bank, West Bengal, India, multivariate statistical techniques were applied to a subgroup of the dataset generated from major ion analysis of groundwater samples. Water quality analysis of major ion chemistry revealed elevated levels of fluoride concentration in groundwater. Factor analysis (FA) of fifteen hydrochemical parameters demonstrated that fluoride occurrence was due to the weathering and dissolution of fluoride-bearing minerals in the aquifer. A strong positive loading (> 0.75) of fluoride with pH and bicarbonate for FA indicates an alkaline dominated environment responsible for leaching of fluoride from the source material. Mineralogical analysis of soli sediment exhibits the presence of fluoride-bearing minerals in underground geology. Hierarchical cluster analysis (HCA) was carried out to isolate the sampling sites according to groundwater quality. With HCA the sampling sites were isolated into three clusters. The occurrence of abundant fluoride in the higher elevated area of the observed three different clusters revealed that there was more contact opportunity of recharging water with the minerals present in the aquifer during infiltration through the vadose zone.

• 상하수도학회지
• /
• 제35권6호
• /
• pp.379-387
• /
• 2021

In general, trans-membrane pressure (TMP), flux, filtration resistance are used as indicators to evaluate the degree of fouling in MBR. However, they have limitations in determining the level of EPS generation, which is known as an important factor of fouling. Therefore, a new evaluation method is required to monitor the amount of EPS generation. In this study, the applicability of capillary suction time (CST), which is used to measure the dewaterability of sludge, was evaluated as an indirect fouling evaluation index. Statistical analysis was performed to evaluate the effect of EPS on CST, and to determine whether EPS has high similarity with representative fouling evaluation indicators and CST, and quantitatively compared them. As a result, the correlation coefficient between CST and bEPS was 0.7988, which was higher than the correlation coefficient between filtration resistance and bEPS. Since bEPS is a major factor inducing fouling by affecting the formation of the cake layer, it was evaluated that CST, which has a high correlation with bEPS, is suitable to represent EPS. In addition, it was evaluated that the correlation coefficient between filtration resistance and CST was high as 0.7187, which could be used as a fouling evaluation index.

• 한국컴퓨터정보학회논문지
• /
• 제28권4호
• /
• pp.197-208
• /
• 2023

본 연구에서는 코로나 이전과 이후의 강의평가에 대한 생각이 어떻게 변화하고 있는지를 분석하고자 하였다. 이를 위해서 A대학을 대상으로 코로나 이전과 이후에 실시한 교양과 전공 수업에 대한 강의평가 자료를 토대로 데이터마이닝 기법 중에서 결정나무분석(Decision Tree)를 사용하였다. 연구결과에 의하면, 교양은 '강의방식(Method)'에서 '강의내용(content)'으로, 전공은 전과 후 모두 '지식향상(Knowledge)'이 중요한 요인으로 나타났다. 특히 교양과 전공 강의평가에서 공통적으로 코로나 후에 '과제및평가적합(Assignment)'이 중요한 요인으로 나타났는데, 이는 향후 교수에게는 수업 중 적절한 교수법, 학생들과의 상호작용, 과제나 시험 결과 피드백 등의 교수역량이 필요함을 시사한다. 이러한 연구 결과를 바탕으로 학생들과의 소통 활성화 방안 지원과 블렌디드 러닝 활성화에 대한 개선방안을 제시하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제11권5호
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• Journal of Korea Trade
• /
• 제24권3호
• /
• pp.20-36
• /
• 2020

Purpose - As the global product network expands through both internationalization and diversification of the multimodal transportation system, corporate strategies have shifted to emphasize the importance of a high value-added international logistics system. To guide policies and strategies to attract relevant industries, this study aims to analyze the location competitiveness of regional logistics distribution center to serve Northeast Asia. Design/methodology - Multi-criteria techniques are considered to offer a promising framework for evaluating decision-making factors. This paper employed an analytic hierarchy process to analyze the hierarchal structure of determinants for selecting the location of a regional logistics distribution center. Adopting both qualitative and quantitative evaluations, this study suggest political implications for a regional logistics distribution center development, such as the direction of political support, service differentiation and infrastructure development. Findings - This study developed a location competitiveness evaluation model, based on the case study of the major port-cities in Northeast Asia. Evaluation model incorporates five factors underpinning 17 components extracted using factor analysis. The results revealed that the logistics factor is the most significant factor for evaluating the competitiveness of a regional logistics distribution center. The remaining factors were market, costs, and services environment. Comparing qualitative and quantitative evaluations, results provide useful insights for a regional logistics distribution center development in Northeast Asia. Originality/value - This study revealed differences between qualitative and quantitative evaluations. The finding implies that prior works on evaluation models of competitiveness has not successfully measured the gap between quantitative data and expert' evaluations. To overcome this limitation, this paper considered both actual data such as actual distance, cost, the number of companies located, and expert opinions.