• 한국운동역학회지
• /
• 제15권3호
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.

• 한국운동역학회지
• /
• 제30권3호
• /
• pp.217-223
• /
• 2020

Objective: The purpose of this study was to analyze the effect of postural sway on the kinematic variables of the putter head during golf putting and to provide information to the importance of postural sway control in the putting stroke for novice golfers. Method: The center of pressure (CoP) and Kinematics variables of the putter head were calculated during 2 m flat golf putting using 8 motion capture cameras (250 Hz) and 2 force plate (1,000 Hz). SPSS 24.0 was used to perform Pearson's correlation coefficient and simple regression analysis, and the statistically significance level was set to .05. Results: As a result of analyzing the correlation between CoP variables and the putter head rotation angle, the CoP moving length, CoP moving range (ML direction), and CoP moving velocity (ML direction) showed a positive correlation with the putter head rotation angle (yaw axis) and were statistically significant. Conclusion: Therefore, In order to perform the accurate putting stroke maintaining the ball's directionality, it is determined that it is important to control posture sway in the ML directions by minimizing the movement and velocity of the CoP.

• Steel and Composite Structures
• /
• 제6권4호
• /
• pp.303-317
• /
• 2006

The connection with combined cross diaphragm is developed for the connection of square CFT column and steel beam and proposed to be used for the frame with asymmetric span length. The structural characteristics of this connection lie in the penetration of the beam flange in the direction of major axis through the column for the smooth flow of stress. The purpose of this study is to analyze the dynamic behavior and stress flow of suggested connection and to evaluate the resistance to shock of connection. Four T-type CFT column-to-beam specimens; two with combined cross diaphragm and the others with interior and through diaphragms, the existing connection types, were made for cyclic load test guided by the load program of ANSI/AISC SSPEC 2002. The results show that the proposed connection is more efficient than existing ones in terms of strength, stress flow and energy absorption and satisfies the seismic performance required in the region of weak/moderate earthquakes.

• 천문학회보
• /
• 제36권1호
• /
• pp.28.1-28.1
• /
• 2011

We observed the transiting exoplanet, TrES-2b, with 1.5m telescope at Maidanak Observatory in Uzbekistan. We observed TrES-2 system for six nights, which contained two orbital periods of the planet. Therefore, we obtained the entire light curve of TrES-2b, which covered not only the whole primary transit containing both ingress and egress part, but also non-transit region. We used both R and Y band filters. Especially, Y filter is used first for transit observation and covers relatively longer wavelength ($1.02{\mu}m$ of center wavelength), to provide the light curve less affected by limb darkening. By fitting best model light curve for the obtained one, we determined these observables, transit depth, transit length, and planet's orbital period, which led to the determination of five physical parameters, stellar radius R*, stellar mass M*, inclination i, semi-major axis a, and planetary radius Rp. We will discuss of these results.

• 한국산림과학회지
• /
• 제85권3호
• /
• pp.472-486
• /
• 1996

한국에서 생육하는 단풍나무속 19종 1변종의 화분형태를 광학현미경과 주사형전자현미경을 이용하여 관찰하였던 바 다음과 같은 결과를 얻었다. 1. 한국에서 생육하는 단풍나무속의 화분에 대하여 4가지형 화분검색표를 작성할 수 있었다. 2. 한국에서 생육하는 단풍나무속의 화분을 발아구 형태와 표면무늬에 의하여 단풍나무형, 청시닥나무형, 네군도단풍형 그리고 설탕단풍형의 4가지 화분형으로 나눌 수 있었다. 3. 화분립의 발아구 형태는 3구형 또는 3공구형이었으며, 표면무늬는 유선상, 난선상, 망상 등으로 나타났다. 4. 화분형태 parameters의 상관분석 결과, 극축의 길이와 발아구의 길이간에 밀접한 관련이 있음을 나타냈다.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.159-171
• /
• 2012

The purpose of this study was to provide information about kinematic variables of the gliding and delivery motion of Hyung-Keun Lee, a high school shot putter who was ranked 1st at the 2011 National Sports Festivals. Three-Dimensional motion analysis using a system of 4 video cameras at a sampling frequency of 60 Hz was conducted during shot-putting events at the 2011 National Sports Festivals. During the gliding and delivery phase of the player the results showed following characteristics; 1) The gliding technique types of the player appeared to be the short-long technique as the gliding and stance length ratio were $42.3{\pm}3.87$ % and $57.7{\pm}3.87$ %, respectively. In addition, the trajectory of shots during the gliding and delivery phase showed different trajectory patterns with "S-shaped" type of elite players due to the deviation from a central axis of the APSS (athletic-plus shot system). 2) The horizontal velocity of COG made from gliding should maintain the velocity during transition and release phase, but the player showed a small momentum for a gradual decrease of velocity. 3) Therefore, the player requires to adjust an appropriate ratio between gliding and stance length with a strong muscle power at the trunk, throwing arm, and the lower extremity during gliding and delivery phase.

• Journal of Radiation Protection and Research
• /
• 제38권4호
• /
• pp.194-201
• /
• 2013

To investigate monitoring unit (MU) efficiency and plan quality of volumetric modulated arc therapy (VMAT) using flattening-filter free (FFF) photon beam in association with target size and location. A virtual patient was generated in Eclipse$^{TM}$ (ver. A10, Varian Medical Systems, Palo Alto, USA) treatment planning system. The length of major and minor axis in axial view was 50 cm and 30 cm, respectively. Cylindrical-shaped targets were generated inside that patient at the center (symmetric target) and in the periphery (asymmetric target, 7.5 cm away from the center of the patient to the right direction) of the virtual patient. The longitudinal length was 10 cm and the diameters were 2, 5, 10 and 15 cm. Total 8 targets were generated. RapidArc$^{TM}$ plans using TrueBeam STx$^{TM}$ were generated for each target. Two full arcs were used and the axis of rotation of the gantry was set to be at the center of the virtual patient. Total MU, homogeneity index (HI), target mean dose, the value of gradient measure and body mean dose were calculated. In the case of symmetric targets, averaged total MU of FFF plan was 23% and 19% higher than that of flattening filter (FF) plan when using 6 MV and 10 MV photons, respectively. The difference of HI, target mean dose, gradient measure and body mean dose between FF and FFF was less than 0.04, 2.6%, 0.1 cm and 2.2%, respectively. For the asymmetric targets, total MU of FFF plan was 21% and 32% was higher than that of FF when using 6 MV and 10 MV photons, respectively. The homogeneity of the target was always worse when using FFF than using FF. The maximum difference of HI was 0.22. The target mean dose of FFF was 3.2% and 4.1% higher than that of FF for the 6 MV and 10 MV, respectively. The difference of gradient measure was less than 0.1 cm. The body mean dose was higher when using FFF than FF about 4.2% and 2.8% for the 6 MV and 10 MV, respectively. No significant differences between VMAT plans of FFF beam and FF beam were observed in terms of quality of treatment plan. The HI was higher when using FFF 10 MV photons for the asymmetric targets. The MU was increased noticeably when using FFF photon beams.

• 한국어류학회지
• /
• 제34권1호
• /
• pp.57-63
• /
• 2022

2016년 4월, 경남 통영시 신봉천에서 채집한 어미 사백어(평균전장 4.6 mm, n=16)를 모래와 돌을 바닥에 깐 실험 수조(60 (L)×30 (W)×30 (H) cm)에 수용하고, 산란행동 및 수정난의 발생과 부화자어의 형태를 관찰하였다. 사백어 어미는 모래 위의 돌 아래에 구멍을 파고 들어가 산란하고, 부화할 때까지 수정난을 보호하는 행동을 보였다. 수정난은 곤봉형(장경 3.2~3.4 mm, 단경 0.6~0.8 mm, n=10)이며 지름이 2~3 cm (원형 또는 타원형)인 난괴를 이루어 돌의 천정에 매달려서 발생하였다. 수온 18~20℃하에서 눈이 생긴 수정난(eyed egg)은 168시간 후에 부화하였다. 부화자어는 투명하며 전장이 4.1~4.4 mm (n=5)이고, 배에는 투명한 난황을 가지고 있었으며 32~33개 (12~13+20)의 근절이 발달해 있었다. 부화 후 3일째, 전장 4.9 mm 자어는 머리의 아래쪽에 입이 열리며 직장이 발달하였다. 전장 난황을 흡수한 전장 5.2 mm 후기자어는 부레 등쪽과 직장 위에 흑색소포가 발달하며 꼬리의 아래 정중선을 따라서 흑색소포가 줄지어 발달하였다.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.2099-2104
• /
• 2010

본 연구에서는 마취 중 리턴맵 분석 방법을 적용하여 ECG 신호에서 R-R 간격의 변화로 표시될 수 있는 HRV 신호를 분석하였다. HRV신호는 자율신경계(autonomic nervous system : ANS)의 상태변이에 따른 심혈관계(cardio vascular system : CVS)의 변화 양상에 대한 객관적인 정보를 구할 수 있으므로 수술중 자율신경계의 변화를 관찰하여 마취심도를 평가할 수 있다. 리턴맵 분석 방법은 일련의 시계열 HRV 신호를 위상공간으로 사상하기 위해 지연시간과 매립차원을 구한 후 2차원의 위상공간에 신호를 재구성하였다. 위상공간에 재구성된 신호 분포를 타원형으로 근사화 한 후 장축과 단축의 길이를 구하여 마취심도를 구별하는데 이용하였다. 마취 단계별 마취심도를 평가하기 위하여 마취 단계를 7단계로 구분하여 분석하였다. 외부자극이 아주 강한 마취유도단계에서 장축과 단축 모두 통계적으로 유의하게 큰값을 나타내었으며, 외부 자극이 가해지지 않은 수술중 단계에서는 장축과 단축의 길이 모두 작은 값을 나타내었다. 따라서 2차원의 위상공간에 매립된 수술중의 HRV 신호를 이용하여 자율신경계의 영향을 판단하여 마취심도를 구분 할 수 있었다.

• 한국양식학회지
• /
• 제9권3호
• /
• pp.187-194
• /
• 1996

어류 종묘생산시 중요한 먹이생물로 사용되는 한국산 rotifer를 순수 분리하기 위하여 염전, 기수호, 하구 및 어류 양식장을 중심으로 채집하였다. 해수산 rotifer, B. plicatilis는 13 지역에서 L-type rotifer 2 strains과 S-type rotifer 14 strains을 순수 분리하였다. 담수산 rotifer, B. calyciflorus는 4곳의 양식장에서 4 strains을 순수 분리하였다. 순수 분리된 해수산 rotifer, B. plicatilis. L-type과 S-type rotifer strain의 피갑장과 내구란 장경의 분포는 각각 $244.3\~255.3\;{\mu}m,\;142.4\~145.5\;{\mu}m$와 $131.0\~165.8\;{\mu}m,\;93.7\~116.4\;{\mu}m$로 나타났다. 또 담수산 rotifer, B. calyciflorus strains의 피갑장과 내구란 장경의 분포는 각각 $211.8\~229.9\;{mu}m$와 $126.8\~140.2\;{\mu}m$로 나타났다. B. plicatilis는 성장과 내구란 생산이 매우 다양하게 나타났다. L-type과 S-type의 rotifer의 최고 밀도는 각각 O-L이 200개체/ml였고, H-S가 753.3개체/ml로 가장 높게 나타났다. 생산된 내구란은 S-type에서는 YY-S가 86.7개/ml로 가장 높았고, L-type에서는 O-L이 45.8개/ml로 높았다.