• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.97-115
• /
• 2013

The world-wide principal criteria of aircraft operations is ICAO Annex 6. Operations of Aircraft. Among ICAO Annex 6, Part I is for International Commercial Air Transport - Aeroplanes and it assumes major part of civil aviation. ICAO has been providing Contracting States with SARPs(Standards and Recommended Practices) and monitor each State's reflection degree into their domestic air law, so-called USOAP(Universal Safety Oversight Audit Program). Current ICAO USOAP is Snap-shot method, but it will be changed to USOAP-CMA method from the year of 2013. ICAO USOAP results have overall effects on national aviation industry such as routes, insurance, airlines cooperation and so forth. Low grades of results attract international attention and that leads to flag carrier's operation stoppage, route restriction, airlines cooperation restriction, insurance increase directly or indirectly. Thus it is important to get excellent grades in ICAO USOAP and to maintain confidence. Our government ranked top to get 98.89 grades in 2008 ICAO USOAP but after 2008 the revised provisions have not been reflected sufficiently into our air law. So I would like to grip reflection ratio of ICAO Annex 6 Part I into our domestic air law by using the most updated revised edition on this paper. Together I would like to suggest alternatives for the non-reflected and partially reflected.

• Korean Journal of Social Welfare
• /
• v.65 no.1
• /
• pp.147-174
• /
• 2013

Until recently, self-employment workers are often excluded from labor market studies. Most relevant studies has focused on the determinants of entry into self-employment. However, the self-employment is highly exposed to poverty risk although they are working. Despite that, relatively little is known about the economic severity of the self-employed. This study uses data from the Korea Welfare Panel Study to examine the situation of the self-employed's in-work poverty and the determinants of in-work poverty among them. Major findings are as follows. First, self-employed people experience 3.5 times higher in-work poverty risk than employees. Especially, the ratio of own-account self-employed people living below the poverty line is similar with that of even precarious employees. Second, the extent of poverty of self-employment is more serious. Third, the proportion of self-employed among working poor is about 53% although self-employed workers are composed of only about 24% among working people. Fourth, temporary employees and self-employed people are more likely to be poor than full time employees according to logistic regression. It is statistically significant. It implies that it is desirable to regard the self-employed as the policy target group along with temporary employees. Fifth, the ratio of in-work poverty of self-employed aged 40-64 whose education level is low and the self-employed aged 40-64 who work in low-skilled service sector are higher than that of the other group. It implies that measures to alleviate their economic difficulties are urgently needed.

• Journal of Korean Society of Forest Science
• /
• v.96 no.4
• /
• pp.401-407
• /
• 2007

This study analyzed an economic efficiency of oak mushroom cultivation in order to provide data needed for formulating related policies. 88 farmhouses in major producing areas were interviewed with. The average production cost per 100 bed-logs was 151,699 won. Among production costs, material costs accounted for 56.0% and labor costs 41.8%. Oak mushroom cultivation was labor-intensive and labor input was a significant factor determining the production costs. There was 3 7.2% gap in production costs between Chungbuk, the highest cost area and Gyeonggi, the lowest cost area of oak mushroom due to difference in labor input. Average revenue per 100 bed-logs was 178,627 won. Average income per 100 bed-logs, which is variable production costs of 116,613 won subtracted from the revenue, was 62,014 won and thus income rate was 34.7%. Income rate in Jeonbuk, the highest area, was higher than that in Gyeonggi, the lowest area, by 15.8% points due to difference in quantities produced, grade, and variable production costs, in particular, labor costs. The result of the economic analysis indicates that reduction in establishment and labor costs, accounting for the highest portion in production costs is priority issue for the enhancement of the competitiveness of the oak mushroom industry.

• Journal of Global Scholars of Marketing Science
• /
• v.16 no.2
• /
• pp.109-132
• /
• 2006

A Major aim of this study is to test the hypothesis that there is an association between empowerment, organizational memory, and new product creativity. In addition to exploring these relationships, this study examines the effect of new product creativity on new product performance, and identify the moderating effects of market uncertainty in the relationships between new product creativity and performance. For this purposes, we developed a research model based on the literature reviews of empowerment, organizational memory, market uncertainty, and new product creativity. A total of 121 usable survey responses has been used in the empirical research for foods manufacturing industry. The findings indicate that (1) Empowerment has a positive effect on new product creativity, (2) Organizational memory has a positive effect on new product creativity, (3) New product novelty has a positive effect on new product performance, and (4) Only competition uncertainty has a moderating effects between the new product meaningfulness and performance. The findings have implications for managers wishing to acquire the new product creativity and to better the new product development performance.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.199-212
• /
• 2010

To establish an infrastructure for technology and information in the domestic construction industry, several construction regulations pertaining to construction information have been institutionalized. However, there are major problems with the domestic information classification system, earned value management (EVM) and project management information system (PMIS). In particular, the functions of the current PMIS have consisted of a builder-oriented system, and as EVM is not applied to PMIS, the functions of reporting, analysis and forecast for owners are lacking. Moreover, owners cannot confirm information on construction schedule and cost in real time due to the differences between the EVM and PMIS operation systems. The purpose of this study is to provide a framework that is capable of operating PMIS efficiently under an e-business environment, by providing a proposal on how to establish a work breakdown structure (WBS) and an EVM - PMIS integration model, so that PMIS may provide the function of EVM, and stakeholders may have all information in common. At the core of EVM - PMIS integration is the idea that EVM and PMIS have the same operation system, in order to be an activity-based system. The principle of the integration is data integration, in which the information field of an activity is connected with the field of a relational database table consisting of sub-modules for the schedule and cost management function of PMIS using a relational database management system. Therefore, the planned value (PV), cost value (CV), actual cost (AC), schedule variance (SV), schedule performance index (SPI), cost variance (CV) and cost performance index (CPI) of an activity are connected with the field of the relational database table for the schedule and cost sub-modules of PMIS.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.3-11
• /
• 2016

Recently, overseas plant orders of domestic enterprises are steadily increased, and the amount of orders in the first half of 2014 were 93% increased compared to the previous year. In addition, now which is the third quarter of 2015, overseas plant orders are already over 249.8 billion dollars so the interests of plant industry research has been increased. In the life cycle of the plant project, CM before the construction stage is to complement the uncertainties that are inherent in the early stages of the project, and from the viewpoint of supporting the rational decision-making, the importance of its role is on the rise. Among them, excavating and investing participation plan in the planning stage is an important work that has a large impact force to influence the success and failure of future project. However, the work has become a problem with frequent consultations due to decision-making, continuous modification, and inefficient repetitive tasks. Therefore, it is needed that work process should be changed to effectively accommodate. The purpose of this paper is to derive the major work items for excavating and investing participation plan in the planning stage of the plant project, and establish a standardized work process through the Delphi analysis. The result of this study is expected to be utilized for EPC companies in ensuring the technical competitiveness in planning on overseas markets, and improve the efficiency of work.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.151-163
• /
• 2004

This study aims to develop a standard protocol by which users can exchange data information efficiently between KOSDIC and GIS. The ultimate goal from this study is to propose a data exchange format using KOSIC. The background of this study is that GIS industry sector is vigorously developing linked to spatial information construction such as UIS, LIS, EIS, AM/FM through supporting by regional government institution. According to do, the format of data transformation becomes major issue. GIS data can easily transfer to CAD version but when CAD data convert to GIS format (DWG->DXF->SHP) cannot get high success rate due to errors and problems. In addition, CAD data feature is made from oriental structure which is made of point and line faeture so that GIS system is impossible to data transformation. In the reason, the biggest problem is discordance of symbolization in integration and standard of data format. By investigation the usability of this study, conclusion are drawn efficient alternative plan in data transformation. Though this wort we will be able to provide a better transformation of data conversion between CAD format and GIS format. Accordingly, it is of important to enrich the integrated construction information infrastructure, which accommodates ever-changing constructions environment.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.1
• /
• pp.133-151
• /
• 2007

In the era of 21st new century. reinforcement of regional competitiveness by establishing innovation system is taking its place of main small and medium sized enterprise policies in major developed countries. The model of regional balanced development for promoting small and medium sized enterprise is a main frame of governmental small and medium sized enterprise policies. which complements national innovation process. And in the level of local area, the model is regional network system, molded in the process of induction, application, modification, proliferation of new technologies and knowledge by local businessman and innovators. This study focused on the strategy development for small and medium sized businesses to increase local competitive power, in terms of regional balanced development. In order to find the real problems and improvement alternatives for local competitive power, this study both reviewed the common strategies and action programs advanced in developed countries for small businesses, and did research on the current economic conditions in local area. Based on the lessons from foreign cases and the analysis of the current situations in small business in local area, the study suggested the model of regional balanced development for promoting small and medium sized enterprise including formation of innovation network system through the invitation of leading firms in the area, industry-university partnerships, and development and attraction for small and medium sized businesses.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.187-194
• /
• 2007

In order to control and manage oil-tanker scrapped materials and wastes properly, the actual conditions and global trends of the treatment and the management of ship scrapped wastes were surveyed and some amendments to marine pollution prevention law of Korea were proposed. Global annual volume of scrapped ships was estimated to be about 22 million DWT and most of them were scrapped in 4 major ship scrap countries such as Bangladesh, China. India and Pakistan and in minor ship scrap countries such as Turkey, the Philippines, Indonesia and Vietnam. The industry of ship scrap has been mainly developed in developing countries or undeveloped countries rather than in advanced countries. Most of scrapped ships were found to be small or medium size below 1,000 GRT In Jellanam-Do and Jeju-Do of Korea. Most of ship scrap enterprise and all enterprises of collection, transfer, treatment and disposal for ship scrapped materials and wastes were shown to be small sized in Korea. The regulations and/or rules which shall prohibit or limit trans-boundary movement of overage oil-tankers for scrap from Korea to developing or undeveloped countries, and vice versa should be Included in marine pollution prevention law of Korea. the criteria of manpower and facilities for enterprise of ship scrap, and for enterprises of collection, transfer, treatment and disposal of ship scrapped materials and wastes should be stipulated in marine pollution prevention law of Korea. It is desirable to introduce the system or concept of recycle or reuse of ship scrapped materials and wastes on producer's responsibility into marine pollution prevention law of Korea.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.133-139
• /
• 2018

Chemically damaged hair is vulnerable to external stimuli in daily life due to the weakened physical properties of the hair strand itself. The purpose of this work was to determine whether chemical conjugation between hair keratin proteins restores tensile strength and thus results inpreventing further deterioration under repeated combing. A model damaged hair tress was produced by a typical perm-process. Then, it was internally crosslinked by the bifunctional crosslinker (3-aminopropyl)triethoxysilane (APTES), via both silane coupling and carbodiimide chemistry. Physical properties, including tensile strength, Young's modulus, and plateau stress, were measured to verify the effect of internal crosslinking, and the existence of crosslinking was verified by Fourier transform infrared (FT-IR) spectroscopy. The degrees of hair breakage and split ends were evaluated by repeated combing-drying tests. Physical properties of chemically damaged hair were restored by internal crosslinking. Successful crosslinking of APTES via both silane coupling and carbodiimide chemistry was verified by FT-IR spectra. Prevention of breakage and split ends after repeated combing with heat was observed. Human hair can be weakened by chemical damage including perm-processing, so restoring such properties is a major issue in the hair care industry. This work shows that internal crosslinking of damaged hair via chemical conjugation would be a potent method to restore the healthy hair.