• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.116-122
• /
• 2021

This study evaluated the effect of simulation training on cardiac arrest in hospitals for inactive nurses with 360 VR content, and attempted to prepare basic data for simulation training for inactiv nurses in the future. The design of this study is an experiment study before and after a single group. The study period was from October 13, 2020 to December 17, 2020. The subjects of the study were a total of 21 nurses who participated in the education program for inactive nurses. For simulation training for inactive nurses, Microsoft Powerpoint, hybrid simulation, high-fidelity simulation, and 360 VR content were applied for theories education and practical education. As a result of the study, the satisfaction level of the curriculum for the cardiac arrest situation in the hospital for inactive nurses was 4.78±0.36 points out of 5 points. Understanding of education was 4.71±0.46 points out of 5 points. Usefulness of education was 4.80±0.40 points out of 5 points. Confidence in airway maintenance before and after training, BLS review, manual defibrillator, emergency medication administration, airway maintenance, emergency situation simulation, and debriefing were all significant. According to the results of this study, simulation training of the situation of cardiac arrest in the hospitals for inactive nurses was effective. In future studies, it will be necessary to develope and verify specific teaching and learning methods by applying various cases of cardiac arrest situations in consideration of the type of hospitals.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.264-270
• /
• 2012

e-Training focusing on the experience and practice accelerates actual-active learning and enforces the learning effects against the existing theory based education. The most typical hans-on training system is augmented reality. Especially, in the training field installed augmented reality system, the automobile maintenance trainee experiences effective training with the immediate information, which is indicating the location of parts and the procedure of repairing. The tracking is the core technology of the augmented reality system. The performance of augmented reality system depends on the tracking technology. Therefore, this paper suggests the tracking technology which is proper to the e-Training augmented reality service technology for the car mechanics.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.4
• /
• pp.169-179
• /
• 2002

This paper presents an efficient algorithm for the estimation of damage location and severity in structure using Probabilistic Neural Network (PNN). Artificial neural network has been being used for damage assessment by many researchers, but there are still some barriers that must be overcome to improve its accuracy and efficiency. The major problems with the conventional neural network are the necessity of many training data for neural network learning and ambiguity in the relation of neural network architecture with convergence of solution. In this paper, PNN is used as a pattern classifier to overcome those problems in the conventional neural network. The basic idea of damage assessment algorithm proposed in this paper is that modal characteristics from a damaged structure are compared with the training patterns which represent the damage in specific element to determine how close it is to training patterns in terms of the probability from PNN. The training pattern that gives a maximum probability implies that the element used in producing the training pattern is considered as a damaged one. The proposed damage assessment algorithm using PNN is applied to a 2-span continuous beam model structure to verify the algorithm.

• Journal of Aerospace System Engineering
• /
• v.14 no.6
• /
• pp.44-57
• /
• 2020

The ICAO AMO global recognition system will be instituted in 2024, with the aim of reducing the certification and surveillance burden on aviation authorities and approved maintenance organizations (AMOs). If the domestic AMO certification and surveillance system is internationally recognized through this system, it may facilitate the rapid development of the domestic MRO industry in South Korea. To ensure international recognition of the domestic AMO system, the AMO surveillance and regulation system must be improved. This study reviewed ICAO policies, standards, guidelines, and leading aviation authorities' regulations and systems with regard to maintenance organization certification and surveillance, and a comparative analysis with the domestic system was conducted. From this, gaps in aviation safety inspection personnel training, qualification, and surveillance were identified, and measures for improving inspection personnel training and organization certification and surveillance system maintenance were elucidated to preemptively respond to the ICAO AMO global recognition system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.2
• /
• pp.105-113
• /
• 2012

Maintenance training is generally provided to teach employees new knowledge and techniques in order to increase their qualities. It means that the purpose of maintenance training is to increase an employee's knowledge or technique level and to maintain or increase their performance level through continuous training in their field, and the methods, contents and the level of training vary depending on the type of job they perform. Maintenance training is more important for jobs that require continuous technical increases or research, or for professional jobs that continuously require new knowledge and techniques. The purpose of this study is to provide quality service to consumers by responding to the rapidly changing jewelry distribution environment and to quickly and accurately acquire new and advanced jewelry inspection and appraisal techniques, and to contribute to the healthy consumption culture through a general quality increase in the jewelry industry.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.837-847
• /
• 2007

The study focused on the evaluation of maintenance management strategies used in public hospital buildings in Lagos state. It also assessed the labour composition for maintenance operations. In achieving these objectives, opinions of maintenance officers of ten (10) different hospitals in different local government areas of the state were sampled through well structured questionnaires. The data collected were analyzed using descriptive and inferential statistics. From the analysis, the study revealed that majority of those public hospitals do not have specific budget for maintenance programmes, maintenance policies, maintenance log book and maintenance manual to guide the operatives. About 98% of them do not understand the type of maintenance strategy being used for their maintenance operations. 78% of the maintenance work are only executed when there is a breakdown or in response to user's request. For labour composition, the cleaning of interior and exterior of the building, inspection of building elements, repairs and replacements of building elements are mainly carried out by in-house staff, while the repair and replacement of equipment is by outsourcing. The study also revealed that using in- house staff, reduces costs and provides a higher security while outsourcing provides more flexibility in staffing reduces equipment expenditures and provide better access to special skills. The study recommended proactive measures to provide necessary training and support for maintenance staff and users of these facilities and a means of securing sufficient funds for maintenance programmes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.26-35
• /
• 2007

The vehicle of urban transit is a complex system that consists of various electric, electronic, and mechanical equipments, and the maintenance cost of this complex and large-scale system generally occupies sixty percent of the LCC (Life Cycle Cost). For reasonable establishing of maintenance strategies, safety security and cost limitation must be considered at the same time. The concept of system reliability has been introduced and optimized as the key of reasonable maintenance strategies. For optimization, three preceding studies were accomplished; standardizing a maintenance classification, constructing RBD (Reliability Block Diagram) of VVVF (Variable Voltage Variable Frequency) urban transit, and developing a web based reliability evaluation system. Historical maintenance data in terms of reliability index can be derived from the web based reliability evaluation system. In this paper, we propose applying inverse problem analysis method and hybrid neuro-genetic algorithm to system reliability optimization for using historical maintenance data in database of web based system. Feed-forward multi-layer neural networks trained by back propagation are used to find out the relationship between several component reliability (input) and system reliability (output) of structural system. The inverse problem can be formulated by using neural network. One of the neural network training algorithms, the back propagation algorithm, can attain stable and quick convergence during training process. Genetic algorithm is used to find the minimum square error.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.735-742
• /
• 2019

The need for education and training on engine-part maintenance is rising in order to prevent marine accidents occurring due to a surge in engine-part damages. However, practical training using actual equipment is difficult due to the size and location of the equipment. Therefore, the necessity of developing a training system for marine engines using virtual reality (VR) is intensifying. The purpose of this paper is to develop an optimized system for marine engine education and training using existing VR programs and equipment. To this end, we selected and modeled the marine engine and education target suitable for the class, and developed the system using VR development software. The developed VR education and training system is designed to experience content that is otherwise difficult to train or practice in the curriculum through virtual reality. In fact, fourth grade students from Maritime University were taught using marine engine VR educational equipment, and it confirmed that there was an educational effect on the class. In the future, the introduction of an education and training system using VR in the field of marine engines can improve their maintenance and repairing capacity, and aid in reducing marine accidents.need for education and training on engine part maintenance is increasing to prevent marine accidents.