• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.204-209
• /
• 1995

The influence of the interfacial properties on the bond capacity of reinforcing bars to concrete is studied in this paper. In this study, the deterioration of the interfacial bond capacity when top-cast bars or epoxy-coated bars are used is examined. The effect of such variables on bond capacity in reinforced concrete is studied by experiment which use beam-end specimens. The main objective of this study is that comparing the test results and the requirements in ACI 318-89 code. the verification of the factor in ACI code is also presented in this paper. The results of the test show that "top bar effect" is considerably affected by the slump of fresh concrete, so the influence of slump shoud be taken into account for top bar effect factor in code. Test results also shows that the bond-slip curve of the epoxy-caoted bars is similiar to that of the uncoated and bond strength is reduced about 15% and that coating thickness seems to influence the bond strength deterioration.rioration.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.1
• /
• pp.35-39
• /
• 2004

Statistical design of experiments was successfully employed to investigate the effect of alternating magnetic field on activation of polycrystalline Si (p-Si) doped as n-type using $\textrm{PH}_3$, by full factorial design of three factors with two levels. In this design, the input variables are graphite size, alternating current, and activation time. The output parameter, sheet resistance, is analyzed in terms of the primary effects and multi-factor interactions. Notably, the three-factor interaction is calculated to be a dominant interaction. The interaction between graphite size and activation time and the main effect of current are important effects compared to the other variables and relevant interactions. Alternating magnetic flux activation is proved a significantly beneficial processing technique.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.609-614
• /
• 2001

This paper is to explain reasonable shear behavior that can apply usually to reinforced concrete beams on the basic concepts of existent analysis and experimental research information. This study is succession $paper^{2) 3) 4) 5)}$ of treatise announced in existing and main control variable of reinforced concrete beams with stirrups used internal force state factor($\alpha$). Shear failure of reinforced concrete beams with stirrups is Influenced greatly because of the actual geometrical shape(a/d) of the concrete and flexural reinforcement steel ratio, stirrup reinforcement ratio and concrete compression strength, size effect etc. Therefore, shear behavior of reinforced concrete beams with stirrups that flexural crack is happened can be explained easily through proper extent proposal of internal force state factor($\alpha$) that express internal force state flowing. Use existent variable truss model by analysis model to explain arch action. Also, wish to compose each failure factors and correlation with internal force state factor by function, and when diagonal cracks happens, internal force state factor($\alpha$) study whether shear stress and some effect are.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.319-328
• /
• 2020

This paper investigates the effect of the width of failure and tension crack (TC) on the stability of cohesive-frictional soil slopes in three dimensions. Working analytically, the slip surface and the tension crack are considered to have spheroid and cylindrical shape respectively, although the case of tension crack having planar, vertical surface is also discussed; the latter was found to return higher safety factor values. Because at the initiation of a purely rotational slide along a spheroid surface no shear forces develop inside the failure mass, the rigid body concept is conveniently used; in this respect, the validity of the rigid body concept is discussed, whilst it is supported by comparison examples. Stability tables are given for fully drained and fully saturated slopes without TC, with non-filled TC as well as with fully-filled TC. Among the main findings is that, the width of failure corresponding to the minimum safety factor value is not always infinite, but it is affected by the triggering factor for failure (e.g., water acting as pore pressures and/or as hydrostatic force in the TC). More specifically, it was found that, when a slope is near its limit equilibrium and under the influence of a triggering factor, the minimum safety factor value corresponds to a near spherical failure mechanism, even if the triggering factor (e.g., pore-water pressures) acts uniformly along the third dimension. Moreover, it was found that, the effect of tension crack is much greater when the stability of slopes is studied in three dimensions; indeed, safety factor values comparable to the 2D case are obtained.

• Korean Journal of Human Ecology
• /
• v.24 no.4
• /
• pp.571-586
• /
• 2015

This study examined the effect of ambivalent fashion consuming tendency on continuous information search and fashion store selection. Surveys period was from Jan. 8th to Jan. 20th in 2014. The subjects of this study were the young 218 women who had the shopping experiences with ambivalent fashion consuming tendency in their 20s of Pusan and Kyung-nam. These surveys referred to the relevant preceding researches and were completed by some pilot researches (focus group interview, paper-pencil test). The data was analyzed by frequency analysis, reliability analysis (Cronbach's ${\alpha}$), factor analysis and regression analysis. The main results of this study were summarized like following: First, this study was based on the definition and characteristics of the ambivalent fashion consuming tendency. The current ambivalent fashion consuming tendency consisted of price ambivalence, trend ambivalence and brand ambivalence. The consumer's demographic characteristics affected trend ambivalence, brand ambivalence. Second, continuous information search was composed of entertaining information search and rational information search. Third, ambivalence fashion consuming tendency had a strong influence on continuous information search (information search and share activity). Forth, the price ambivalence, trend ambivalence and brand ambivalence, which is the factors of ambivalent fashion consuming tendency, significantly impacted on selecting the fashion store. In conclusion, ambivalent fashion consuming tendency is main related factor impacting on continuous information search and fashion store selection.

• Journal of Korean Society for Quality Management
• /
• v.46 no.1
• /
• pp.27-38
• /
• 2018

Purpose: A large number of attributes with mixed levels are often considered in the conjoint analysis. In the cases where attributes have two or three levels, we research on the efficient design of survey questionnaire to estimate all the main effect and two factor interaction effects with a reasonable size of it. Methods: To reduce the number of questions in a questionnaire, the balanced incomplete block mixed level factorial design with minimum aberration was proposed by Lim and Chung (2016). Based on the number of questions and that of the respondents in that design, D-optimality criterion is adopted to find efficient designs where the main effect and two factor interaction effects are estimated. Results: The list of the number of questions and that of the respondents in efficient designs for survey questionnaire are recommended based on the D-efficiency of each design and the proposed selection criteria for the number of both questions and the respondents. By analyzing all the respondents survey data generated by the simulation study, we find the proper model. Conclusion: The proposed methods of designing survey questionnaires seem to perform well in the sense that how often the proper model is found in a simulation study where all the respondents survey data are generated by the simulation model.

• Journal of Digital Convergence
• /
• v.6 no.2
• /
• pp.107-115
• /
• 2008

This paper aims to examine the main factors of the job embeddedness on organizational citizenship behavior and job performance. To accomplish these purposes, the main factors of the job embeddedness such as fit, linkage, and sacrifice were found from the previous studies. The questionaries of 250 were distributed to the employees working at the Gumi Industrial Complex. The questionaries of 220 were obtained and 204 were analyzed through frequencies, correlation and multiple regression. The results of this study are as follows; First, we conducted exploratory factor analysis for three constructs (fit, linkage, and sacrifice) using oblique rotation method that did not assume independence among the factors and main factors of job embeddedness were grouped together by three factors. Second, it is shown that three main factors of job embeddedness have a positive influence on the organizational citizenship behavior and job performance (p<0.05). This study, however, have limitations of number of sample and survey area. The future study should consider these limitations in improving model applicability in practice.

• 한국디지털정책학회:학술대회논문집
• /
• 2006.06a
• /
• pp.77-86
• /
• 2006

This paper aims to examine the main factors of the job embeddedness on organizational citizenship behavior and job performance. To accomplish these purposes, the main factors of the job embeddedness such as fit, linkage, and sacrifice were found from the previous studies. The questionaries of 250 were distributed to the employees working at the Gumi Industrial Complex. The questionaries of 220 were obtained and 202 were analyzed through frequencies, correlation and multiple regression. The results of this study are as followings; First, we conducted exploratory factor analysis for three constructs (fit, linkage, and sacrifice) using oblique rotation method that did not assume independence among the factors and main factors of job embeddedness were grouped together by three factors. Second, it is shown that three main factors of job embeddedness have a positive influence on the organizational citizenship behavior and job performance (p<0.05). This study, however, have limitations of number of sample and survey area. The future study should consider these limitations in improving model applicability in practice.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.597-611
• /
• 2011

The purpose of this study is to propose a design method for one-piece dress patterns with high body fitness through an appearance evaluation of one-piece dress patterns with the application of the 3D Virtual Clothing System known as i-designer. Measures consisted of an optical illusion effect in visual imagery and mutual influence according to a change in the length and princess line, in a silhouette of a one-piece dress. The data was assessed by a t-test and a multi-way ANOVA and factor analysis using SPSS 17.0. The results were as follows; The design of the study pattern was done by modifying the ease of the bust circumference, ease of the abdominal circumference, ease of the hip circumference, the position of the side seam line, and the appearance of horizontality in the hem line, which received a low evaluation in appearance evaluations of a one-piece dress pattern. As a result of analyzing the visual image according to a change in the length and princess line, in the form of a silhouette of a one-piece dress, four factors were selected; the whole-body optical illusion factor, the upper-body optical illusion factor, the bust optical illusion factor, and the lower-body optical illusion factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the upper-body optical illusion factor, a significant difference was not noted in the two-way interaction between the length and the princess line. However, the influence on three-way interaction among the length, princess line, and silhouette was significant.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.76-84
• /
• 1987

A study has been made to clarify the microstructural effect on static tensile properties of the dual phase steel, in which the martensitic phase encapsulated islands of ferritic phase. The main results are as follows: Yield strength is associated with the degree of plastic constraint factor and tensile strength increases with increasing of strain hardening exponent. Also, the variation of ductility is dependent upon the amount of micro-brittle facets.