• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1091-1097
• /
• 2017

상용(Commercial type) 냉각 팬이 적용된 방산용 전자장비는 생산 기간 중 팬 단종이 빈번하게 발생된다. 팬 단종 문제의 해결을 위해서는 대체 팬 선정이 필요하며, 고온 동작 시험 등의 장비 성능 및 신뢰성 검증이 요구된다. 따라서 본 논문에서는 생산 과정에서 활용 가능한 효과적인 대체 팬 선정 및 검증 방안에 대해 연구하였다. 먼저, 장비 냉각에 필요한 유량 및 압력을 계산하여 대체 팬을 선정하였고, 신뢰성을 확보한 CFD 방열 해석 모델을 활용해 팬 선정의 타당성을 검증하였다. 이후 대체 팬을 장비에 적용하여 고온 운용 시험을 수행하였다. 그 결과 장비는 고온 환경에서 정상적인 기능을 발휘하였으며, 주요 부품 및 내부 공기 온도는 열적으로 안정된 상태임을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.488-489
• /
• 2014

This paper is a case study for the reduction of excavator Radiated noise. The main purpose of the study is to reduction noise for the cooling fan and hydraulic line which is main noise source of the excavator. Recent, noise regulations for the construction equipment is becoming stricter. Compare to past excavator drivers requirements for noise level demanding are becoming more and more. Therefore, this progress is an important role in determining the quality of the excavator.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.129-138
• /
• 2013

화력발전소의 보일러를 일정한 화력으로 가동하기 위해서는 일정한 통풍량을 유지시켜야 한다. Main Bearing Assembly Unit 일정한 통풍량을 유지시키기 위하여 Fan을 회전시킨다. 그러나 점차 발전량이 많아지는 반면에 발전을 위하여 투입되는 석탄의 질은 초기의 보일러 설계 기준보다 나빠지고 있다. 특히 원가절감의 일환으로 또는 자원의 고갈로 인한 고급품질의 석탄 확보가 어려움으로 인하여 점차 낮은 질의 석탄이 투입되고 있다. 이로 인하여 초기 설계시의 Main Bearing Assembly의 수명보다 약 절반의 수명인 2~3년의 주기로 Main Bearing Assembly의 정비교체가 요구되고 있다. 본 연구에서는 Main Bearing Assembly Unit의 역설계 해석을 통해서 수명단축의 원인을 분석하고 초기 목표 수명을 가질 수 있도록 새로운 시스템으로 개선하여 개발하고자 한다.

• 디자인학연구
• /
• 제6권1호
• /
• pp.47-72
• /
• 1993

Nowadays conmpetltlOn of developing new products is getting keen. We can notice that the role and importance of design are emphasized more than ever.The main cause of this tendency is that technical power is no more a factor which secures the superiority in products competition, as technology is gneneralized in the world. Therefore, design is recognized intensely as a competitive strategy to promote competitive power of products. It is an already known fact that the design for both rational function and charming form to satisfy consumer's desires is a short cut to success, when a company develops a new product to promote competitive power in market. The design which plays a leading role in the activity of developing more cnovenient, more economical and more aesthetic products is called 'Competitive Edge' or 'New Corporate Weapon'. Judging form each company's case of developing products, we can guess that it has its own plan and process of developing new products with defferdnl interest and effort. The strategy of developing products is considered as the most important factor that affects the very existence of rhe company. This thesis is composed of six chapters in all. In the firstchapter, I describe the purpose, method, and scope of study.The second chapter includes the image of form in oil fan heater market in nearby Japan and that of interior in our domestic home and shops, and the trend of word life cycle by analyzing circumstances. The third chapter focuses on consumer's attitude. In the fourth chapter, I compare and test current products of competitive companies including Samsung, Daewoo, Shinilwith those of Gold STar. The trend of products, technique, and design which resulted form this comparison is described. In the fifth chapter I explain the strategy, and process of design of oil fan heater in 1992. The last conclusive chapter presents the major point drawed form the case study, but not includes an estimation of products and the condition of market. In this thesis, I reconsider the general understanding of design and designing process and the value of design as a main factor in the strategy of management by investigating the development of products and the strategy of design, and the process of design.

• 소음진동
• /
• 제8권6호
• /
• pp.1043-1052
• /
• 1998

The noise sources in the outdoor unit of RAC are identified by the sound intensity method. The main noise sources are compressor noise and fluid noise which is caused by the fan. heat exchanger and shroud. First. the fluid noise is reduced through the design of new fan and shroud. reduction of the system resistance by rearrangement of heat exchanger. and optimization of the complex parameter between the fan and shroud. Next, in order to reduce the compressor noise, the new shape of compressor mount and sound-proof material was applied. As a result, the overall noise was reduced by 4∼5dB (A).

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.715-721
• /
• 2006

In the present work, nozzle shape of a jet fan is optimized numerically using three-dimensional Reynolds-averaged Navier-Stokes analysis. Standard $k-{\epsilon}$ model is used as a turbulence closure. Response surface method is employed as an optimization technique. The objective function is defined as maximum throw distance. Three geometric variables, i.e., length and angle of nozzle, and interval between two nozzles, are selected as design variables. As the main result of the optimization, the throw distance has been improved effectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.575-581
• /
• 1998

The noise sources in the outdoor unit of RAC(Room Air Conditioner) are identified by the sound intensity method. The main noise sources are compressor noise and fluid noise which is caused by the fan, heat exchanger and shroud. First, the fluid noise is reduced through the design ol new fan and shroud with high flow rate and low noise, reduction of the system resistance by rearrangement of heat exchanger, and optimization of the complex parameter between the fan and shroud. Next, in order to reduce the compressor noise, the new shape of compressor mount and sound-proof material was applied. As a result, the overall noise was reduced by 4-5dB(A).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.763-766
• /
• 2002

A BEM is highly efficient method in the sense of economic computation. However, boundary integration is not easy for the complex and moving surface e.g. in a rotating blade. Thus, Kirchhoff surface is designed in an effort to overcome the difficulty resulting from complex boundary conditions. A Kirchhoff surface is a fictitious surface which envelopes acoustic sources of main concern. Acoustic sources may be distributed on each Kirchhoff surface element depending on its acoustic characteristics. In this study, an axial fan is assumed to have loading noise as a dominant source. Dipole sources can be computed based on the FW-H equation. Acoustic field is then computed by changing Kirchhoff surface on which near-field is implemented, to analyze the effect of Kirchhoff surface on it.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.499-502
• /
• 2002

The present study has been carried out for understanding of flows over an evaporator in cooling system of water. Main emphasis is to decide the flow patterns in order to enhance the flow rate with low noise level. Two cases aye examined for comparison of flows; one is blowing system and the other is suction style with respect to Inn system. Present methodology for this work is PIV (Particle Image Velocimetry) techniques and Rot-wire anemometer for velocity measurements and wind tunnel for performance of the present fan. Consequently, it is found that flows passing evaporator and other components for cooling are more effective than the suction flows. Flow details with performance of fan system are also presented for proper explanation of the conclusion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.857-860
• /
• 2006

It is important to diminish noise source of an electric motor used in appliances. We studied on the noise reduction of BLDC motor to drive a fan. Especially, this study was focused on detent torque caused by interaction between a permanent magnet of rotor and groove in stator. This source and rotating system brought about a resonance. This paper showed that the higher harmonic component of this torque had a main factor to lessen noise. So, we had designed new magnets with shape like a peanut and pseudo-sinusoidal flux density for low-noise BLDC motor in refrigerator.