• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.496-503
• /
• 2006

The inner and outer car panels for bonnet, door, and trunk lid are assembled by hemming rather than welding. To achieve successful fabrication of these panels, the complicated timing chart of hemming units for pre-and main hemming stages should be made to optimal one. In this study, a design system for automatic timing chart generation is developed. Using AutoCAD VBA and EXCEL data chart, hemming die design parameters and guidelines were put into the program to give hemming unit drawings and consequent timing charts. Then the prepared timing charts were checked and modified. The effectiveness of the system is verified by applying it successfully to hemming unit design for bonnet panel joining.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.3
• /
• pp.36-42
• /
• 2022

Whereas the necessity for recycling and reuse is being emphasized owing to the depletion of resources and waste disposal problems caused by the continuous development of the industry, the importance of remanufacturing has been highlighted recently. Re-manufacturing involves a series of processes in which failed disposal or aging goods are recovered to a state similar to that of a new product. In this regard, machine tools, which are large structures, can achieve the effect of remanufacturing. Among the various elements constituting the machine tool, the main spindle portion that affects the processing precision is critical. Therefore, this study is conducted to derive improvement measures for the main axis of an old Miller planner via reverse engineering and central composite design, which is one of the core processes of remanufacturing.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1263-1270
• /
• 2000

The operation frequency of High-speed Communication System becomes very fast with the advanced technology of VLSI chips and system implementation. There may exist various types of noise sources degrading the signal integrity in this system. The present main system is made of backplane, so faults can be brought whenever a board is removed, replaced or added. This backplane boards testing is a very important process to verify the operation of system. firstly, we model the effects of the internal noises in the High-speed Communication System to the signal line and propose a new design method to minimize these effects. For the design methodology, we derive the characterization value for each mode land them construct the optimal simulation model. We compare the result of own proposing method with that fo the existing methods, through simulation and show that the quality of High-speed Communication System is significantly enhanced. Secondary our proposing BIST for the Backplane Boards Testing is designed to guarantee that there is no fault in the high-speed communication system.

• Transactions of Materials Processing
• /
• v.18 no.4
• /
• pp.354-360
• /
• 2009

Hot-forging process and die design were made for a large-scale compressor wheel of Ti-6Al-4V alloy by using the results of 2-D FEM simulation. The design integrated the geometry-controlled approach and the processing contour map based on the dynamic materials model and the flow stability criteria. In order to obtain the processing contour map of Ti-6Al-4V alloy, compression tests were carried out in the temperature range of $915^{\circ}C$ to $1015^{\circ}C$ and the strain rate range of $10^{-3}s^{-1}$ to $10s^{-1}$. In the die design of the compressor wheel using the rigid-plastic FEM simulation, forging dimensional accuracy, the capacity of the forging machine and defect-free forging were considered as main design factors. The microstructure of hot forged wheel using the designed die showed a typical alpha-beta structure without forging-defects.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.1
• /
• pp.260-273
• /
• 2013

This study aims to reflect experts' opinions in analyzing a design thinking as foundation of multidisciplinary education. For this purpose, a delphi survey was conducted with 20 experts in three sessions from May 1 to June 25, 2012. To analyze the collected data, descriptive statistics, including frequency, percentage, the mean, and standard deviation were implemented, and internal reliability test on the survey instrument was carried out for statistical processing. The main results are as follows : First, the delphi analysis on intuitive thinking of design thinking suggested 7 items(to pursue the possibility of outside, to pursue the possibility of applying new forms of technology, content planning, facing a complex real-world phenomena etc.). Second, the delphi analysis on logical thinking of design thinking suggested 7 items(executed repeatedly, reasoning and verification, artificial intelligence, a decision support system etc.) Third, the delphi analysis on subjective thinking of design thinking suggested 9 items(user experience measuring, user satisfaction ratings, user requirements analysis, user interface design, behavioral responses of the human etc.). Fourth, the delphi analysis on objective information of design thinking suggested 8 items(information management system, simulation, production process, information exchange and sharing etc.). According to the results of the delphi analysis, design thinking can be seen as the foundation of multidisciplinary education. Suggestions were made for discussion about the main results and further researches.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.3 s.11
• /
• pp.24-28
• /
• 2006

This paper proposed design and implementation of automation system that recognize device module boards automatically that are connected on main control board. The system of this paper is divided to main board and device module boards, and the main board is designed a board by slot structure. The slot structure is possible a extension for upgrade and addition of board ability. Besides, it is easier a establishment and disjointing because it recognizes automatically a device board. The proposed system in this paper compares with K10S1 PLC. The result shows an advantage of extensibility and ability, and it is reduced expense and period for development.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.12
• /
• pp.3230-3243
• /
• 1998

액세스망 기술 분야는 초고속 정보통신 서비스를 제공하기 위하여 유·무선 전달 매체 처리기술, 액세스망 구성 방식 기술, 기존 인프라를 이용하는 고도의 DSL기술 등이 복합되어 사업자의 망 구축 여건에 따라 다양한 형태로 실현되고 있다. MAIN1)은 기존 동선상에서 전화 및 데이터 서비스는 물론 광대역서비스 제공을 위해 VDSL기술을 채용하며, 망 구성방식으로는 ATM/SDH 또는 ATM/PON 기반으로 FTTx 방식의 통합 액세스망 플랫폼이다. 그러나 액세스망은 다수 망사업자와 서비스사업자 환경과 공중망과 사설망이 혼재하며, 새로운 요소기술이 복합되는 망 영역이므로 소요장치의 OAM 뿐만 아니라 망관리에 대한 체계적인 OA&M이 요구되고 있다. 액세스망의 OA&M은 비용 효과적인 액세스망 실현과 실제 망 운용비용과는 상호 상반된 관점을 가진다. 본 논문은 다양한 형태의 액세스망에 대해 통합 관점의 망 관리와 시스템 관리를 위한 체계적인 OA&M 정립을 목적으로 한다. 이를 위하여 통합 엑세스망 플랫폼에 대한 망관리 설계 접근 방법 및 고려사항에 대해 논하고, MAIN의 관리 구조 모델을 제시한다. 또한 MAIN 하드웨어 구조에서 NEL 시스템의 운용관리 및 소요기술에대한 OAM 기능과 망관리 기능 구현을 통하여 MAIN 엑세스망의 OA&M 실현 구조를 조명 함으로서 관련 액세스망 OA&M 구현 시 기본 참조 모델로 제안한다.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3077-3085
• /
• 1999

Conventional caching system doesn't support Real-Time attributes and load balance. To solve these problems, this paper describes the design and implementation of the RIOP(Real-Time Inter-ORB Protocol) to provide QoS guarantees mechanism integrating RSVP and TAO ORB. Futhermore, it provides fast XCSLS(Extended Caching System for Load Balance) implementing main memory cache in Primary Server using locality of objects. In this paper, a key feature is presented : QoS enforcement, PS(Primary Server) and RS(Replicated Server)

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.769-772
• /
• 1998

This paper present an efficient techniques for visual inspection of taped electronic parts, suitable for real time implementation. The main environments of developed system are IBM-compatible personal computer, frame grabber, digital input-output board. It is connected to the programmable logic controller unit of the taping machine in real time. Using a queuing structure, operator or extractor machine can remove easily the defect one from production line. Also, we design a new illumination system for sacquring shape and subface features of object. Therefore, it redue pre-processing step and processing time.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1213-1214
• /
• 2012

Global variables can be read or modified by any part of the program, making it difficult to remember or reason about every possible use. Sometime it has tight couplings between some of other variables, and couplings between variables and functions. The main focus of this paper is to use call graph and the control flow analysis to design a model from where we generate the test cases for testing global variables.