• 대한산업공학회지
• /
• 제30권2호
• /
• pp.76-83
• /
• 2004

This study aimed to empirically investigate perceived discomfort depending upon external load, upper limb postures and their holding time. Discomfort was obtained through an experiment, in which external load, wrist flexion/extension, elbow flexion, shoulder flexion and adduction/abduction were used as experimental variables. The subjects were instructed to hold given postures for 60s and to rate their subjective discomfort scores at 5s, 20s, 40s and 60s by using the free modulus method of magnitude estimation. The results showed that while only external load and elbow flexion were statistically significant at the holding time of 5s at ${\alpha}=0.05$ or 0.10, external load and upper limb postures excluding shoulder adduction/abduction significantly affected discomfort ratings at 20s, 40s and 60s at ${\alpha}=0.01$ or 0.05. Discomfort scores were also significantly different between four posture holding times at ${\alpha}=0.01$. The effects of external load and holding time were much larger than those of upper limb postures. Based on the results of this study, it is recommended that external load and holding time as well as working postures betaken into consideration to precisely quantify postural load in industry.

• The Journal of Asian Finance, Economics and Business
• /
• 제4권4호
• /
• pp.39-49
• /
• 2017

Religious intolerance has become a common feature of many countries in recent times. Studies have revealed a worldwide increase in government regulations and social hostilities against religious beliefs and practices. The stifling impact of both government and society on the market for religion, warrants closer scrutiny. This study examines the relationship between government regulations and social hostilities towards religious beliefs and practices, for the period of 2001-2011 for a sample of 45 European countries. The Generalized Method of Moments dynamic panel estimation technique is employed to analyze the micro panel dataset of 45 European countries, to establish the possible relationships that may exist between these variables. The theoretical framework for this study is based on the Religious Economies Theory and the Supply Side Theory of Religion. The results of this study show evidence of the positive relationship between government regulations and social hostility. Interestingly, the study also revealed that the impact of social hostility on the level of government restrictions is smaller in magnitude compared to the reverse impact of government restrictions on social hostilities, indicating the dangerous role played by governments in inciting social hostilities, when they regulate or restrict religious beliefs and practices.

• 한국정보통신학회논문지
• /
• 제15권8호
• /
• pp.1813-1819
• /
• 2011

본 연구에서 제안하는 위치인식시스템은 전파의 위상 및 크기를 이용하여 거리를 구하고 여기서 구한 거리 정보를 보다 정확하게 측정하기 위해서 비젼에 의한 영상 히스토그램 기법을 이용하여 보완하는 기술이다. 제안하는 기술은 거리측정용 무선송수신기로부터 송수신된 900Mhz대 RF 신호로부터 중간주파수인 450Khz의 아날로그 데이터를 디지털신호처리를 통하여 얻어내며, 여기서 얻어진 거리 정보에다 비젼에 의해 얻어진 거리를 상호 보완하여 보다 정확한 거리 정보를 획득한다. 측정된 거리의 평가를 위해서 실제거리와 측정된 거리를 비교 분석하고, 또한 평균처리 및 진폭특성을 통한 측정오차 개선 방법과 기존의 RF 신호만 이용하는 경우와 비교 검토한다.

• 터널과지하공간
• /
• 제13권2호
• /
• pp.108-116
• /
• 2003

백악기 경상계 안산암과 불국사 화강암류가 주로 분포하는 지반에서 시공된 터널의 내공변위 계측자료를 분석하였다. 터널 주변 암반을 RMR법에 의한 다섯 가지 암반등급으로 구분하고 각 등급에 포함된 계측자료들을 통계처리하여 암반등급별 내공변위의 회귀분석을 실시하였다. 연구 결과. 로그함수보다는 지수함수의 상관계수 가 더 크며, 연약한 암반등급일수록 내공변위의 크기와 표준편차가 크게 나타났다. 또한, 최종내공변위에 대한 최대변위속도 및 초기내공변위의 관계를 도출하였으며, 이 중에서 최종내공변위와 최대변위속도의 상관계수는 0.87로 나타나 이들은 비교적 높은 상관성을 가지는 것으로 확인되었다

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권6호
• /
• pp.1-9
• /
• 2011

A bibliographical review of Gy sampling theory for particulate materials was conducted to provide readers with useful means to reduce errors in soil contamination investigation. According to the Gy theory, the errors caused by the heterogeneous nature of soil include; the fundamental error (FE) caused by physical and chemical constitutional heterogeneity, the grouping and segregation error (GE) aroused from gravitational force, long-range heterogeneous fluctuation error ($CE_2$), the periodic heterogeneity fluctuation error ($CE_3$), and the materialization error (ME) generated during physical process of sample treatment. However, the accurate estimation of $CE_2$ and $CE_3$ cannot be estimated easily and only increasing sampling locations can reduce the magnitude of the errors. In addition, incremental sampling is the only method to reduce GE while grab sampling should be avoided as it introduces uncertainty and errors to the sampling process. Correct preparation and operation of sampling tools are important factors in reducing the incremental delimitation error (DE) and extraction error (EE) which are resulted from physical processes in the sampling. Therefore, Gy sampling theory can be used efficiently in planning a strategy for soil investigations of non-volatile and non-reactive samples.

• 한국농공학회지
• /
• 제37권6호
• /
• pp.103-111
• /
• 1995

Drought index calculation based on the principal hydrological parameters, such as rainfall and reservoir storage, can estimate the duration and intensity of drought in irrigation reservoirs. It is difficult to build up a drought criteria since the conditions change variously by the reliability of rainfall. Because of the increasing water demands, it is urgent to prepare a generalized positive countermeasure to overcome drought. Water demands can at calculated but the estimation of drought characteristics, and the effective water management method can be established. The purpose of this study is to obtain a drought index and build up a data-base on the reservoir basins for establishing the fundamental hydrological data-base. This Index can observe the behavior of the WSI(Water Supply Index) and the component indices. The results summarized through this study are as follows. 1. WSI value of zero does not correspond to 100% in average due to the skewness in the probability distributions. 2. WSI is not a linear index; that is, given change in terms of water volume or percentage of average does not result in a proportional change on the WSI scale. 3. WSI is not always between the reservoir and the rainfall index in magnitude. This is only true if the component indices are of opposite sign. If they are of the same sign, the SWSI will often have a mangitude greater than either of the component indices. This is easily understood, because the concurrence of extreme values of the same sign for the two components is rarer than the occurrence of extreme values for either of the two components individually.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.89-94
• /
• 2014

It is established that the perceived image contrast is affected by surround luminance. In order to get the same perceived image contrast, the optimum surround compensation ratios for those surround conditions is needed. Much research has been performed for dark, dim, and average surrounds. In this study, a wide range of surround luminance from dark up to $2087cd/m^2$ was considered. Using magnitude estimation method, the change in perceived brightness of six test stimuli was measured under seven surround conditions; dark, dim, 2 levels of average, bright, and 2 levels of over-bright surrounds. To drive the perceived image contrast from the perceived brightness, two different definitions of contrast were tested. Their calculated results were compared with the visual data of our previous work. And to conclude, the perceived contrast compensation ratios were 1:1.11:1.2 for average, dim and dark surrounds. These were close to CIECAM02 model (1:1.17:1.31). Besides, for average, bright, over-bright1 and over-bright2 surrounds the ratios 1:1.17:1.42:1.69 were determined. For intermediate or more extreme surround conditions, the compensation ratio was obtained from the linear interpolation or extrapolation.

• Journal of Ecology and Environment
• /
• 제30권2호
• /
• pp.201-207
• /
• 2007

Researchers have used a variety of methods to measure patterns of animal movement, including the use of spatial data (mapping the position of a moving animal at specified intervals) and direct estimation of travel path length by pacing under a moving animal or group. I collected movement data from five groups of siamangs (Symphalangus syndactylus) using two different methods concurrently to estimate the effects of the method of data collection on estimates of daily path length (DPL). Estimates of DPL produced from spatial data collected at 15-minute intervals were 12% lower than estimates of DPL produced by pacing under the traveling animal. The actual magnitude of the difference was correlated with the travel distance, but there was no correlation between the proportional difference and the travel distance. While the collection of spatial data is generally preferable, as spatial data permit additional analyses of patterns of movements in two or three dimensions, the relatively small difference between the DPL's produced using different methods suggests that pacing is an acceptable substitute where the collection of spatial data is impractical. I also subsampled the spatial data at increasing time intervals to assess the effect of sampling interval on the calculation of daily path lengths. Longer sampling intervals produced significantly shorter estimates of travel paths than shorter sampling intervals. These results suggest that spatial data should be collected at short time intervals wherever possible, and that sampling intervals should not exceed 30 minutes. Researchers should be cautious when comparing data generated using different methods.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.58-65
• /
• 2005

A method measuring angular speed and estimating angular acceleration of an automotive wind shield wiper pivot with limited resources has been proposed. Limited resources refer to the fact that processes cannot be operated in real-time with a regular notebook running a Microsoft Windows. Also, they refer to the fact that data acquisition cards have only two general purpose counters as many generic cards do. An optical incremental encoder has been employed for measuring angular motion. To measure the angular speed of the pivot, periods for the encoder's output pulses have been measured as the speed is related to the reciprocal of the period. Since only information acquired from one counter channel is the magnitude of the angular speed, sign correction is necessary. Also the information for the exact time when a pivot passes left and right dead points is also missing and the situation is inherent to the hardware setup. To find out the zero-crossing time of the angular speed, a linear interpolation technique has been employed. Lastly, to overcome the imperfection of the mechanical encoders, the angular speed has been curve fitted to a spline. Angular acceleration can be obtained by a differentiation of the angular speed.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.106-113
• /
• 2004

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. In this study, the dynamic response of vehicle structure to external forces is classified an inverse problem involving strains from the experiment and the analysis. The practical dynamic forces are determined by the combination of the analytical and experimental method with analyzed strain by quasi-static finite element analysis under unit force and with measured strain by a strain gage under driving load, respectively. In a stressed body, inter-molecular chemical bonds are failed beyond the certain magnitude. The failure of molecular structure in material is considered as a time process of which rate is determined by mechanical stress. That is, the failure of inter-molecular chemical bonds is the fatigue lift of material. This kinetic concept is expressed as lethargy coefficient. And S-N curve is obtained with the lethargy coefficient from quasi-static tensile test. Equivalent practical dynamic force is obtained from the identification of practical dynamic force for one loading point. Using the practical dynamic force and S-N curve, fatigue life of a window pillar is analyzed with FEM under the identified force by the procedure of above mentioned.