• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.9
• /
• pp.813-818
• /
• 2007

This study aims to know the effect of road traffic noise perception when the visual and aural information is added in a laboratory experiment. ME (magnitude estimation) and SD (semantic differential method) evaluation on the effect of visual and aural effect were carried out by 43 university students. As the result, up to 10 % of psychological reduction effect was shown under the 65 dB(A). As the noise level, it was analyzed that the vision affected about 7 dB(A) and sound affected 5 dB(A). However, if these two are given simultaneously, mainly sound affects to reduce the annoyance of noise and the vision next. Compared with the urban central circumstances, this effect (2 dB(A) under 65 dB(A) noise) was shown smaller than field test.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.970-973
• /
• 2006

The effects of the additional visual and auditory stimuli on the loudness evaluation of road traffic noise was investigated by the method of magnitude estimation. As a result, it was shown that additional visual stimulus of noise barrier can influence on the loudness perception of road traffic noise. Also, additional auditory stimuli such as green music or sound of flowing water can influence on the loudness perception of road traffic noise. approximately $5{\sim}10%$ lower than the absence of stimuli. But this effect was disappeared in the range of over 65dB(A).

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.76-80
• /
• 2001

The weight of shoes may serve as a determining factor of perceived comfort and feel to the consumer in their purchase and repurchase decisions of footwear. People, however, seem to have trouble in accurately judging the feeling of weight of shoes on their feet. This paper made a psychophysical study of subjects′ sensitivity to weight on their feet and in their hands. The experiment consisted of 3 tests according to the motions people make when they evaluate the feel of shoes: 1) vertical lifting of a shoe on the foot ("hefting" in on the foot) 2) swing the shod foot back and forth; 3) holding and lifting a shoe by hand ("hefting" it in the hand). The method of constant stimuli and magnitude estimation were used for the experiment with 20 subjects. Weber′s ratios and the power law exponents obtained for each of the three tests were 0.156 and 0.713, 0.108 and 0.970, and 0.065 and 1.249, respectively in the same order of the previously listed tests.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.67-71
• /
• 2016

This paper addresses a problem of defocus map recovery from single image. We describe a simple effective approach to estimate the spatial value of defocus blur at the edge location of the image. At first, we perform a re-blurring process using Gaussian function with input image, and calculate a gradient magnitude ratio with blurring amount between input image and re-blurred image. Then we get a full defocus map by propagating the blur amount at the edge location. Experimental result reveals that our method outperforms a reliable estimation of depth map, and shows that our algorithm is robust to noise, inaccurate edge location and interferences of neighboring edges within input image.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.178-183
• /
• 2002

The purpose of this study was to quantitatively investigate the effects of external load upper extremity posture on perceived discomfort. An experiment was conducted for measuring discomfort scores depending upon external loads and upper extremity postures, in which the free modules and numeric estimate method of the magnitude estimation was adopted as a tool for obtaining discomfort ratings. The upper extremity postures were controlled by wrist flexion/extension, elbow foexion, shoulder flexion, and shoulder adduction/abduction. The results showed that all experimental variables except shoulder adduction/abduction were significant at ${\alpha}$=0.01 or 0.05. The effect of external load was very much larger than that of upper extremity postures. Therefore, it is recommended that a new posture classification scheme taking effect of external load to into consideration be developed for quantifying postural load.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.53-54
• /
• 2018

This paper introduces an approach to detect motion areas of stationary objects when the camera slightly moves in the scene by computing optical flow. The flow field is computed by two pyramidal architectures of 5 levels which are built by down-sampling the size of the images by half at each level. Two pyramids of images are built and then optical flow is computed at each level. A warping process combines the information and generates a final flow field after applying edge smoothness and outliers reduction steps. Moreover, we convert the flow vectors in order of magnitude and angle to a color map using a pseudo-color palette. Experimental results in the Middlebury optical flow dataset demonstrate the effectiveness of our method compared to other approaches.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.3
• /
• pp.447-455
• /
• 1998

It is important to identify and evaluate poor working postures properly to prevent work-related musculoskeletal disorders. The purpose of this study is to develope a new upper body micropostural classification scheme for analyzing postural stress in industry. Most of the existing postural classification schemes were based either on the literature, or on simple biomechanical principles, or on a subjective ranking system. The scheme suggested in this study was based on perceived joint discomfort measured through experiment, in which nineteen subjects participated and the magnitude estimation method was employed to obtain subjects' joint discomfort. Also, the criteria for evaluating postural stress of working postures were presented for practitioners of health and safety to be able to redesign working methods and workplaces, which was based on maximum holding time by Miedema and other people. It is expected that the scheme developed in this study could be used as a valuable tool when evaluating working postures.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.5
• /
• pp.26-43
• /
• 2000

It is well accepted that gloss variation deteriorates the print quality and there are various objective ways to measure this. Several studies now have shown that the coefficient of variation in the octave band passed printed gloss image has an excellent correlation with ratings by an expert panel using a magnitude estimation scaling method. The correlation improves when the gloss level is also taken into account beyond that of the COV. There is also evidence that the correlation would improve even more if the gloss spatial distribution could be better accounted for. We show that much (at least 80% and perhaps up to 90%) of the gloss distribution can be accounted for by the paper topography over a wide range of dimensions (scale). Recent work has supported the role that microroughness and multiple surface scattering play in the gloss distribution. This offers the promise of showing that even a greater amount of gloss variationcan be explained by topography.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.171-178
• /
• 2000

In this study, an indirect method to estimate the setup runout of a ball-end mill from cutting force signal is proposed. This runout makes cutting forces of each tooth of the milling cutter unequal. By transforming the cutting force model from time domain to frequency domain through time-convolution theorem, the magnitude and phase angle of runout can be explicitly expressed with material constants, cutting conditions, and force signal. The static setup runout can be obtained by extrapolating estimated effective runout, which is independent of feedrate but decreases linearly with increase in axial depth of cut. The setup runout estimated by slot cutting experiments, shows good agreement with the measured one.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.358-365
• /
• 2006

In this study, fragility curves of continuous buried pipelines subjected to transverse PGD (permanent ground deformation) due to liquefaction are proposed. For the waterworks system, continuos buried pipelines made of ductile iron, poly ethylene, and poly vinyl chloride are analyzed and fragility curves are drawn. Fragility curves are based on the repetitive analyses results and formulated with the dominant factors of behaviour of buried pipeline. With the use of fragility curves, engineers can estimate the status of damage of buried pipeline without overall knowledge of relevant features. Especially, fragility curves proposed in this study will act as a major module of earthquake loss estimation method. Moreover, critical value of magnitude and width of transverse PGD (by which the full damage status of buried pipelines are induced) are estimated. With the use of regression curves of these values, pre evaluation of seismic safety of buried pipelines located within liquefaction hazardous region will be possible.