• Progress in Superconductivity
• /
• v.10 no.1
• /
• pp.23-28
• /
• 2008

We report refinement of crystalline boron by an attrition ball milling system and the superconducting properties of the $MgB_2$ pellets prepared from the refined boron. In this work, we have conducted the ball milling with only crystalline boron powder, in order to improve homogeneity and control the grain size of the $MgB_2$ that is formed from it. We observed that the crystalline responses in the ball-milled boron became broader and weaker when the ball-milling time was further increased. On the other hand, the $B_{2}O_{3}$ peak became stronger in the powders, resulting in an increase in the amount of MgO within the $MgB_2$ volume. The main reason for this is a greater oxygen uptake. From the perspective of the superconducting properties, however, the sample prepared from boron that was ball milled for 5 hours showed an improvement of critical current density ($J_c$), even with increased MgO phase, under an external magnetic field at 5 and 20 K.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.223-228
• /
• 1992

$Bi_2Sr_2Ca_2Cu_3Oy$-based superconductor phases were synthesized by the wet process using acetate precursors. Superconducting transition temperature ($T_c$) was determined from both measurements of electrical resistivity and magnetic susceptibility for the samples which were sintered at the temperatures of $850^{\circ}C$, $860^{\circ}C$, and $870^{\circ}C$ for 40 hours, respectively. The values of carrier concentration from Hall measurements were compared with $T_c$ data as a function of the sintering temperature. The formation mechanism of the superconducting phase was tentatively discussed on a basis of the distribution profile concept of the carrier concentration and the amount of superconducting phases in a ceramic bulk. This explanation may be supported by the experimental results of correlation between the relative amount of superconducting phases and the difference of $T_c$ values between superconducting onset temperature and cutoff temperature at each sintering temperature.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.22-32
• /
• 2020

The hippocampal volume atrophy is known to be linked with neuro-degenerative disorders and it is also one of the most important early biomarkers for Alzheimer's disease detection. The measurements of hippocampal pure volumes from Magnetic Resonance Imaging (MRI) is a crucial task and state-of-the-art methods require a large amount of time. In addition, the structural brain development is investigated using MRI data, where brain morphometry (e.g. cortical thickness, volume, surface area etc.) study is one of the significant parts of the analysis. In this study, we have proposed a patch-based ensemble model of 3-D convolutional neural network (CNN) to measure the hippocampal pure volume from MRI data. The 3-D patches were extracted from the volumetric MRI scans to train the proposed 3-D CNN models. The trained models are used to construct the ensemble 3-D CNN model and the aggregated model predicts the pure volume in one-step in the test phase. Our approach takes only 5 seconds to estimate the volumes from an MRI scan. The average errors for the proposed ensemble 3-D CNN model are 11.7±8.8 (error%±STD) and 12.5±12.8 (error%±STD) for the left and right hippocampi of 65 test MRI scans, respectively. The quantitative study on the predicted volumes over the ground truth volumes shows that the proposed approach can be used as a proxy.

• Journal of the Korean Ceramic Society
• /
• v.30 no.4
• /
• pp.325-331
• /
• 1993

Aqueous solutions of metallic salts, ZrO(NO3)2.2H2O and Y(NO3)3.5H2O were used as raw materials to synthesize crystalline submicron spherical powders of Zr0.94Y0.06O1.97 with tetragonal crystal phase. Each aqueous solution was mixed on the magnetic stirrer to homogenize for 12 hours. The concentration of the mixed solutionwas changed from 0.01mol/$\ell$ to 0.1mol/$\ell$ calculated as the concentration of Zr0.94Y0.06O1.97. Ultrafine droplets of starting mixed solution were sprayed by the ultrasonic vibrator and carried into the furnace kept at 55$0^{\circ}C$, $650^{\circ}C$, 75$0^{\circ}C$ and 85$0^{\circ}C$ using carrier gas of air (10$\ell$/min) and pyrolysed to form Y-TZP fine powders. The results of this exeriment were as follows. 1) Synthesized powders were nonagglomerated and spherical type. 2) Particle size distribution was narrow between 0.1${\mu}{\textrm}{m}$ and 1${\mu}{\textrm}{m}$. 3) Forming reaction Y-TZP was finished above synthetic temperature 75$0^{\circ}C$. 4) As the synthetic temperature rised from 55$0^{\circ}C$ to 85$0^{\circ}C$, the mean particle size decreased from 0.35${\mu}{\textrm}{m}$ to 0.22${\mu}{\textrm}{m}$ in the concentration of starting solution with 0.02mol/$\ell$. 5) At 75$0^{\circ}C$ of synthetic temperature, the concentration changes of starting solution from 0.01mol/$\ell$ to 0.1mol/$\ell$ increased the mean particle size from 0.24${\mu}{\textrm}{m}$ to 0.38${\mu}{\textrm}{m}$. 6) Chemical compositions of each synthesized particle were homogeneous nearly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.294-301
• /
• 2000

One of the most important design parameters in a microwave radio transmitting system is to reduce spurious response from the output spectrum of the transmitting system. A Local oscillator (LO) is seldom totally pure and at the least contain some LO harmonic signals. A LO or any oscillator is a transmitter if provided with a suitable radiator, conduction, or leakage path. Where mixer is employed in the output of the LO mixer generated spurs can be increased by RF amplifier. To reduce LO leakage, notch filter or band pass filter has been conventionally used. In this paper, the leakage reduction(LR) signal, which has the same magnitude and the opposite phase with respect to LO leakage signal, is added to the output of mixer of the wireless LAN system. The LO leakage is reduced by 30 dB more than the conventional methods do. The proposed method is potentially suitable for low-cost, reliable, and simple application of monolithic microwave integrated circuits (MMICs)

• Journal of the Korean Magnetics Society
• /
• v.6 no.5
• /
• pp.305-309
• /
• 1996

To obtain the Pr-Fe-B ternary system magnets with higher $(BH)_{max}$, the effect of composition ratio and various heat-treatment temperatures on the magnetic properties of Pr-Fe-B system rare-earth magnets were investigated. The magnets with various composition of Pr and Fe were heat-treated at $990^{\circ}C$, $625^{\circ}C$, $585^{\circ}C$, $550^{\circ}C$ after sintering. Curie temperature is $310^{\circ}C$ and quantitative analysis by SEM, EDX shows that the $Pr_{2}Fe_{14}B$, Pr-rich phase consist of Pr~14 at.% and Fe~86 at.%, Pr~58 at.% and Fe~42 at.%, respectively. The coercivity is decreased after heat-treating at $990^{\circ}C$ and increased from 5.6 to 6.3 kOe at $625^{\circ}C$. The maximum energy product is decreased from 43.4 to 30.3 MGOe after the heat-treating at $990^{\circ}C$ but increased from 42.7 to 45.0 MGOe, about 5 %, by heat-treating at $625^{\circ}C$.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.125-129
• /
• 2005

Ba-Ferrite thin films were prepared on $A1_2O_3$ substrate by a pulsed laser deposition system and characterized by SEM, $M\ddot{o}$ssbauer spectroscopy and VSM. The appropriate conditions of pulsation in Ba-ferrite was the oxygen pressure of 0.1 Torr at a substrate temperature of $400^{\circ}C$ and the thickness was variable with the deposition time. Ba-ferrite crystals had the forms of hexagonal plate in the 5 minute deposited film and the needle grains coexisted with the increasing film thickness. $M\ddot{o}ssbauer$ spectroscopy assured that the direction of atomic spin in Fe ion tends to normal to the substrate in the hexagonal plate. The VSM curves have the two types hysteresis of hexagonal and needle phase.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.542-548
• /
• 2003

Nanoparticles with unsaturated poly(hydroxyalkanoate)s (UPHAs) biosynthesized with Pseudo-monas oleovorans were prepared by spontaneous emulsification solvent diffusion method. The influence of nanoparticle formation was investigated with various experimental parameters such as sonication conditions, sol-vent, surfactant and polymer contents, etc. The physical and chemical properties of UPHAS and its nanoparticles were characterized using $^1$H- and $\^$13/C-nuclear magnetic resonance spectroscopies, attenuated total reflection infrared spectroscopy, differential scanning calorimetry and gel permeation chromatography. The morphology of particles was observed using scanning electron microscope and the size and distribution of nanoparticles were measured with electrophoretic light scattering spectrophotometer. The mean diameter of particles decreased with increasing sonication amplitude and time. The addition of ethanol into UPHAS chloroform solution decreased the particle size presumably due to increased solvent diffusion into water phase. The particle size increased with increased the concentration of UPHAS solution. Under the 2-4％ poly(vinyl alcohol) (PVA) aqueous solution the minimum mean diameter of particles was shown. The higher degree of hydrolysis and degree of polymerization of PVA increased the mean diameter of particles.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.14-17
• /
• 2006

[ $AIFeO_3$ ]has been studied by x-ray diffraction (XRD), vibrating sample magnetometer, Mossbauer spectroscopy. The crystal structure is found to orthorhombic with the lattice parameters being $a_0=4.983\;{\AA},\;b_0=8.554\;{\AA},\;c_0=9.239\;{\AA}$, Magnetic hysteresis curve for $AIFeO_3$ showed weakly ferromagnetic phase at room temperature and a asymmetric shape dependent on the direction of applied field at low temperature. The Curie temperature determined by the temperature dependence of magnetization is 250 K. Mossbauer spectra of $AIFeO_3$ have been taken from 4.2 K to 295 K. Isomer shift at room temperature are found to be $0.11\~0.32\;mm/s$, which is consistent with ferric state. The absorption lines widths become broader with increasing temperature, which is attributed to the Fe ions distribution of each cation site and anisotropy energy difference of each sublattice.

• Journal of Life Science
• /
• v.25 no.7
• /
• pp.780-785
• /
• 2015

Dietary intake and bioavailability of phorotannins in abalone was investigated after feeding with the phlorotannin-rich brown seaweed Ecklonia stolonifera after 4 days starvation. Reverse-phase high-performance liquid chromatography (RP-HPLC) affords isolation and quantification of the major phlorotannins of 7-phloroeckol and eckol, which were identified by mass spectrometry and nuclear magnetic resonance. Abalone growth and feed consumption rates were similar when fed either with the E. stolonifera or the common feed seaweed Saccharina japonica for 20 days. Throughout the feeding period, 7-phloroeckolol was accumulated in the abalone flesh tissue up to an average of 0.58±0.13 mg/g dry weight after 6 days. Eckol was reached to 0.25±0.05 mg/g dry tissue after 6 days, and maintained the level until end of feeding period. By feeding S. japonica as a control, no phlorotannins were detected in the abalone tissues. Both of the abalone, fed with E. stolonifera or S. japonica, had enzymes that decomposed 7-phloroeckol and eckol in muscle tissues, with similar degradation rates of −0.05 or less and −0.05 mg/ml/hr, respectively. Phlorotannins were reduced by constitutive enzymes in abalone tissues. Therefore, value-added abalone containing bioactive phlorotannins can be produced by simply changing the feed to the phlorotannin-rich brown seaweed E. stolonifera 6 days before harvest.